From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Wolfram Sang <wsa@the-dreams.de>, linux-i2c@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Pierre-Yves MORDRET <pierre-yves.mordret@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Alain Volmat <alain.volmat@st.com>
Subject: [PATCH v4 4/6] i2c: stm32f7: switch to I²C generic property parsing
Date: Fri, 20 Mar 2020 21:12:47 +0200 [thread overview]
Message-ID: <20200320191249.28835-4-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20200320191249.28835-1-andriy.shevchenko@linux.intel.com>
Switch to the new generic functions: i2c_parse_fw_timings().
While here, replace hard coded values with standard bus frequency definitions.
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v4: fixed typo in parameter (Alain)
drivers/i2c/busses/i2c-stm32f7.c | 57 +++++++++++++++-----------------
1 file changed, 26 insertions(+), 31 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 6418f5982894..330ffed011e0 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -344,9 +344,9 @@ struct stm32f7_i2c_dev {
*/
static struct stm32f7_i2c_spec i2c_specs[] = {
[STM32_I2C_SPEED_STANDARD] = {
- .rate = 100000,
- .rate_min = 80000,
- .rate_max = 100000,
+ .rate = I2C_MAX_STANDARD_MODE_FREQ,
+ .rate_min = I2C_MAX_STANDARD_MODE_FREQ * 8 / 10, /* 80% */
+ .rate_max = I2C_MAX_STANDARD_MODE_FREQ,
.fall_max = 300,
.rise_max = 1000,
.hddat_min = 0,
@@ -356,9 +356,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = {
.h_min = 4000,
},
[STM32_I2C_SPEED_FAST] = {
- .rate = 400000,
- .rate_min = 320000,
- .rate_max = 400000,
+ .rate = I2C_MAX_FAST_MODE_FREQ,
+ .rate_min = I2C_MAX_FAST_MODE_FREQ * 8 / 10, /* 80% */
+ .rate_max = I2C_MAX_FAST_MODE_FREQ,
.fall_max = 300,
.rise_max = 300,
.hddat_min = 0,
@@ -368,9 +368,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = {
.h_min = 600,
},
[STM32_I2C_SPEED_FAST_PLUS] = {
- .rate = 1000000,
- .rate_min = 800000,
- .rate_max = 1000000,
+ .rate = I2C_MAX_FAST_MODE_PLUS_FREQ,
+ .rate_min = I2C_MAX_FAST_MODE_PLUS_FREQ * 8 / 10, /* 80% */
+ .rate_max = I2C_MAX_FAST_MODE_PLUS_FREQ,
.fall_max = 100,
.rise_max = 120,
.hddat_min = 0,
@@ -610,8 +610,25 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
struct stm32f7_i2c_setup *setup)
{
+ struct i2c_timings timings, *t = &timings;
int ret = 0;
+ t->bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+ t->scl_rise_ns = i2c_dev->setup.rise_time;
+ t->scl_fall_ns = i2c_dev->setup.fall_time;
+
+ i2c_parse_fw_timings(i2c_dev->dev, t, false);
+
+ if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_PLUS_FREQ)
+ i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS;
+ else if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_FREQ)
+ i2c_dev->speed = STM32_I2C_SPEED_FAST;
+ else
+ i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
+
+ i2c_dev->setup.rise_time = t->scl_rise_ns;
+ i2c_dev->setup.fall_time = t->scl_fall_ns;
+
setup->speed = i2c_dev->speed;
setup->speed_freq = i2c_specs[setup->speed].rate;
setup->clock_src = clk_get_rate(i2c_dev->clk);
@@ -1914,7 +1931,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
struct stm32f7_i2c_dev *i2c_dev;
const struct stm32f7_i2c_setup *setup;
struct resource *res;
- u32 clk_rate, rise_time, fall_time;
struct i2c_adapter *adap;
struct reset_control *rst;
dma_addr_t phy_addr;
@@ -1961,17 +1977,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
return ret;
}
- i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
- ret = device_property_read_u32(&pdev->dev, "clock-frequency",
- &clk_rate);
- if (!ret && clk_rate >= 1000000) {
- i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS;
- } else if (!ret && clk_rate >= 400000) {
- i2c_dev->speed = STM32_I2C_SPEED_FAST;
- } else if (!ret && clk_rate >= 100000) {
- i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
- }
-
rst = devm_reset_control_get(&pdev->dev, NULL);
if (IS_ERR(rst)) {
dev_err(&pdev->dev, "Error: Missing controller reset\n");
@@ -2011,16 +2016,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
}
i2c_dev->setup = *setup;
- ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns",
- &rise_time);
- if (!ret)
- i2c_dev->setup.rise_time = rise_time;
-
- ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-falling-time-ns",
- &fall_time);
- if (!ret)
- i2c_dev->setup.fall_time = fall_time;
-
ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
if (ret)
goto clk_free;
--
2.25.1
next prev parent reply other threads:[~2020-03-20 19:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-20 19:12 [PATCH v4 1/6] i2c: core: Provide generic definitions for bus frequencies Andy Shevchenko
2020-03-20 19:12 ` [PATCH v4 2/6] i2c: core: Allow override timing properties with 0 Andy Shevchenko
2020-03-20 19:12 ` [PATCH v4 3/6] i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate() Andy Shevchenko
2020-03-20 19:12 ` Andy Shevchenko [this message]
2020-03-23 7:04 ` [PATCH v4 4/6] i2c: stm32f7: switch to I²C generic property parsing Alain Volmat
2020-03-20 19:12 ` [PATCH v4 5/6] i2c: algo: Use generic definitions for bus frequencies Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200320191249.28835-4-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=alain.volmat@st.com \
--cc=alexandre.torgue@st.com \
--cc=linux-i2c@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=pierre-yves.mordret@st.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).