From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
linux-i2c@vger.kernel.org,
Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/2] i2c: designware: Make master module optional
Date: Mon, 23 Mar 2020 12:04:50 +0200 [thread overview]
Message-ID: <20200323100451.28808-1-andriy.shevchenko@linux.intel.com> (raw)
In some cases we know that the controller will be always used in slave mode and
master is just a bulk. In order to drop that, introduce a separate configuration
parameter for master mode. Default it to core to avoid regressions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/i2c/busses/Kconfig | 10 ++++++++++
drivers/i2c/busses/Makefile | 5 ++++-
drivers/i2c/busses/i2c-designware-core.h | 19 ++++++++++++++++++-
drivers/i2c/busses/i2c-designware-master.c | 4 ++--
drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 6 +-----
6 files changed, 36 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2ddca08f8a76..1df238ff8dd0 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -527,6 +527,16 @@ config I2C_DAVINCI
config I2C_DESIGNWARE_CORE
tristate
+config I2C_DESIGNWARE_MASTER
+ bool "Synopsys DesignWare Master"
+ default I2C_DESIGNWARE_CORE
+ help
+ If you say yes to this option, support will be included for the
+ Synopsys DesignWare I2C master adapter.
+
+ This is not a standalone module, this module compiles together with
+ i2c-designware-core.
+
config I2C_DESIGNWARE_PLATFORM
tristate "Synopsys DesignWare Platform"
select I2C_DESIGNWARE_CORE
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 25d60889713c..829731d4a1f9 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -49,7 +49,10 @@ obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o
-i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o
+i2c-designware-core-objs := i2c-designware-common.o
+ifeq ($(CONFIG_I2C_DESIGNWARE_MASTER),y)
+i2c-designware-core-objs += i2c-designware-master.o
+endif
ifeq ($(CONFIG_I2C_DESIGNWARE_SLAVE),y)
i2c-designware-core-objs += i2c-designware-slave.o
endif
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index b220ad64c38d..2d34c15dca75 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -314,13 +314,30 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
void __i2c_dw_disable(struct dw_i2c_dev *dev);
-extern int i2c_dw_probe(struct dw_i2c_dev *dev);
+#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_MASTER)
+extern int i2c_dw_probe_master(struct dw_i2c_dev *dev);
+#else
+static inline int i2c_dw_probe_master(struct dw_i2c_dev *dev) { return -EINVAL; }
+#endif
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
#else
static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
#endif
+static inline int i2c_dw_probe(struct dw_i2c_dev *dev)
+{
+ switch (dev->mode) {
+ case DW_IC_SLAVE:
+ return i2c_dw_probe_slave(dev);
+ case DW_IC_MASTER:
+ return i2c_dw_probe_master(dev);
+ default:
+ dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode);
+ return -EINVAL;
+ }
+}
+
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
#else
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 3a58eef20936..9d2af87f45f1 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -678,7 +678,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
return 0;
}
-int i2c_dw_probe(struct dw_i2c_dev *dev)
+int i2c_dw_probe_master(struct dw_i2c_dev *dev)
{
struct i2c_adapter *adap = &dev->adapter;
unsigned long irq_flags;
@@ -745,7 +745,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
return ret;
}
-EXPORT_SYMBOL_GPL(i2c_dw_probe);
+EXPORT_SYMBOL_GPL(i2c_dw_probe_master);
MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 7a0b65b5b5b5..cbab5346e311 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -290,7 +290,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->nr = controller->bus_num;
- r = i2c_dw_probe(dev);
+ r = i2c_dw_probe_master(dev);
if (r) {
pci_free_irq_vectors(pdev);
return r;
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index c98befe2a92e..0edcebe2168f 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -371,11 +371,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
- if (dev->mode == DW_IC_SLAVE)
- ret = i2c_dw_probe_slave(dev);
- else
- ret = i2c_dw_probe(dev);
-
+ ret = i2c_dw_probe(dev);
if (ret)
goto exit_probe;
--
2.25.1
next reply other threads:[~2020-03-23 10:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-23 10:04 Andy Shevchenko [this message]
2020-03-23 10:04 ` [PATCH v1 2/2] i2c: designware: Move configuration routines to respective modules Andy Shevchenko
2020-03-23 12:26 ` [PATCH v1 1/2] i2c: designware: Make master module optional Andy Shevchenko
2020-03-25 7:47 ` Jarkko Nikula
2020-03-25 11:45 ` Andy Shevchenko
2020-04-15 11:37 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200323100451.28808-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=linux-i2c@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).