From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfram Sang Subject: [PATCH] i2c: altera: use proper variable to hold errno Date: Fri, 27 Mar 2020 23:28:26 +0100 Message-ID: <20200327222826.10207-1-wsa+renesas@sang-engineering.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Received: from sauhun.de ([88.99.104.3]:43012 "EHLO pokefinder.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726781AbgC0W2g (ORCPT ); Fri, 27 Mar 2020 18:28:36 -0400 Sender: linux-i2c-owner@vger.kernel.org List-Id: linux-i2c@vger.kernel.org To: linux-i2c@vger.kernel.org Cc: Thor Thayer , linux-renesas-soc@vger.kernel.org, Wolfram Sang device_property_read_u32() returns errno or 0, so we should use the integer variable 'ret' and not the u32 'val' to hold the retval. Fixes: 0560ad576268 ("i2c: altera: Add Altera I2C Controller driver") Signed-off-by: Wolfram Sang --- Found while trying to refactor code handling "clock-frequency" property. drivers/i2c/busses/i2c-altera.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c index 1de23b4f3809..92d2c706c2a7 100644 --- a/drivers/i2c/busses/i2c-altera.c +++ b/drivers/i2c/busses/i2c-altera.c @@ -384,7 +384,6 @@ static int altr_i2c_probe(struct platform_device *pdev) struct altr_i2c_dev *idev = NULL; struct resource *res; int irq, ret; - u32 val; idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL); if (!idev) @@ -411,17 +410,17 @@ static int altr_i2c_probe(struct platform_device *pdev) init_completion(&idev->msg_complete); spin_lock_init(&idev->lock); - val = device_property_read_u32(idev->dev, "fifo-size", + ret = device_property_read_u32(idev->dev, "fifo-size", &idev->fifo_size); - if (val) { + if (ret) { dev_err(&pdev->dev, "FIFO size set to default of %d\n", ALTR_I2C_DFLT_FIFO_SZ); idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ; } - val = device_property_read_u32(idev->dev, "clock-frequency", + ret = device_property_read_u32(idev->dev, "clock-frequency", &idev->bus_clk_rate); - if (val) { + if (ret) { dev_err(&pdev->dev, "Default to 100kHz\n"); idev->bus_clk_rate = 100000; /* default clock rate */ } -- 2.20.1