linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Oleksij Rempel <linux@rempel-privat.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>, Wolfram Sang <wsa@kernel.org>,
	linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Marc Kleine-Budde <mkl@pengutronix.de>,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	stable@vger.kernel.org
Subject: Re: [PATCH v2 2/2] i2c: imx: Fix external abort on interrupt in exit paths
Date: Tue, 7 Jul 2020 20:33:20 +0200	[thread overview]
Message-ID: <20200707183320.GA3442@kozik-lap> (raw)
In-Reply-To: <1592130544-19759-2-git-send-email-krzk@kernel.org>

On Sun, Jun 14, 2020 at 12:29:04PM +0200, Krzysztof Kozlowski wrote:
> If interrupt comes late, during probe error path or device remove (could
> be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
> i2c_imx_isr() will access registers with the clock being disabled.  This
> leads to external abort on non-linefetch on Toradex Colibri VF50 module
> (with Vybrid VF5xx):
> 
> Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003
> Internal error: : 1008 [#1] ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607
> Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
>   (i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0)
>   (free_irq) from [<805844ec>] (release_nodes+0x178/0x284)
>   (release_nodes) from [<80580030>] (really_probe+0x10c/0x348)
>   (really_probe) from [<80580380>] (driver_probe_device+0x60/0x170)
>   (driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60)
>   (device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0)
>   (__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4)
>   (bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec)
>   (bus_add_driver) from [<80581320>] (driver_register+0x78/0x110)
>   (driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4)
>   (do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc)
>   (kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110)
>   (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)
> 
> Additionally, the i2c_imx_isr() could wake up the wait queue
> (imx_i2c_struct->queue) before its initialization happens.
> 
> The resource-managed framework should not be used for interrupt handling,
> because the resource will be released too late - after disabling clocks.
> The interrupt handler is not prepared for such case.
> 
> Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery")
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> ---
> 
> Changes since v1:
> 1. Remove the devm- and use regular methods.

Hi everyone,

Similar patch for SPI driver was already merged [1]. Any comments here?

Best regards,
Krzysztof


[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=3d87b613d6a3c6f0980e877ab0895785a2dde581

> ---
>  drivers/i2c/busses/i2c-imx.c | 25 ++++++++++++++-----------
>  1 file changed, 14 insertions(+), 11 deletions(-)
> 

  reply	other threads:[~2020-07-07 18:33 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-14 10:29 [PATCH v2 1/2] i2c: imx: Fix PM runtime inbalance in probe error path Krzysztof Kozlowski
2020-06-14 10:29 ` [PATCH v2 2/2] i2c: imx: Fix external abort on interrupt in exit paths Krzysztof Kozlowski
2020-07-07 18:33   ` Krzysztof Kozlowski [this message]
2020-06-15  6:50 ` [PATCH v2 1/2] i2c: imx: Fix PM runtime inbalance in probe error path Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200707183320.GA3442@kozik-lap \
    --to=krzk@kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=mkl@pengutronix.de \
    --cc=o.rempel@pengutronix.de \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).