linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vadym Kochan <vadym.kochan@plvision.eu>
To: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Maxime Ripard <maxime.ripard@free-electrons.com>,
	linux-i2c <linux-i2c@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 3/3] misc: eeprom: at24: register nvmem only after eeprom is ready to use
Date: Mon, 31 Aug 2020 20:24:43 +0300	[thread overview]
Message-ID: <20200831172443.GD2568@plvision.eu> (raw)
In-Reply-To: <CAMpxmJXzGPXwMYg6e+eCYck+nXnNqxSEBOwm5G-vmLYQA7cDpg@mail.gmail.com>

Hi Bartosz,

On Mon, Aug 31, 2020 at 07:21:39PM +0200, Bartosz Golaszewski wrote:
> On Mon, Aug 31, 2020 at 3:56 AM Vadym Kochan <vadym.kochan@plvision.eu> wrote:
> >
> > During nvmem_register() the nvmem core sends notifications when:
> >
> >     - cell added
> >     - nvmem added
> >
> > and during these notifications some callback func may access the nvmem
> > device, which will fail in case of at24 eeprom because regulator and pm
> > are enabled after nvmem_register().
> >
> > Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
> > ---
> > v3:
> >     1) at24 driver enables regulator and pm state machine after nvmem
> >        registration which does not allow to use it on handing NVMEM_PRE_ADD event.
> >
> >  drivers/misc/eeprom/at24.c | 11 +++++++----
> >  1 file changed, 7 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> > index 2591c21b2b5d..26a23abc053d 100644
> > --- a/drivers/misc/eeprom/at24.c
> > +++ b/drivers/misc/eeprom/at24.c
> > @@ -692,10 +692,6 @@ static int at24_probe(struct i2c_client *client)
> >         nvmem_config.word_size = 1;
> >         nvmem_config.size = byte_len;
> >
> > -       at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
> > -       if (IS_ERR(at24->nvmem))
> > -               return PTR_ERR(at24->nvmem);
> > -
> >         i2c_set_clientdata(client, at24);
> >
> >         err = regulator_enable(at24->vcc_reg);
> > @@ -708,6 +704,13 @@ static int at24_probe(struct i2c_client *client)
> >         pm_runtime_set_active(dev);
> >         pm_runtime_enable(dev);
> >
> > +       at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
> > +       if (IS_ERR(at24->nvmem)) {
> > +               pm_runtime_disable(dev);
> > +               regulator_disable(at24->vcc_reg);
> > +               return PTR_ERR(at24->nvmem);
> > +       }
> > +
> >         /*
> >          * Perform a one-byte test read to verify that the
> >          * chip is functional.
> > --
> > 2.17.1
> >
> 
> Good catch! Thanks for the patch. Can I queue it for fixes
> independently from the earlier patches in this series?
> 
> Bart

Sure.

Regards,
Vadym Kochan

  reply	other threads:[~2020-08-31 17:24 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-31  1:55 [PATCH v3 0/3] nvmem: add ONIE NVMEM cells provider Vadym Kochan
2020-08-31  1:55 ` [PATCH v3 1/3] nvmem: core: allow to register cells during nvmem registration Vadym Kochan
2020-09-04 11:02   ` Srinivas Kandagatla
2020-09-04 11:23     ` Vadym Kochan
2020-09-11 16:59       ` Vadym Kochan
2020-08-31  1:55 ` [PATCH v3 2/3] nvmem: add ONIE NVMEM cells support Vadym Kochan
2020-09-04 11:02   ` Srinivas Kandagatla
2020-08-31  1:55 ` [PATCH v3 3/3] misc: eeprom: at24: register nvmem only after eeprom is ready to use Vadym Kochan
2020-08-31 17:21   ` Bartosz Golaszewski
2020-08-31 17:24     ` Vadym Kochan [this message]
2020-09-01  8:06   ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200831172443.GD2568@plvision.eu \
    --to=vadym.kochan@plvision.eu \
    --cc=arnd@arndb.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.ripard@free-electrons.com \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).