linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Wu <michael.wu@vatics.com>
To: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	<linux-i2c@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Morgan Chang <morgan.chang@vatics.com>,
	Michael Wu <michael.wu@vatics.com>
Subject: [PATCH v2] i2c: designware: call i2c_dw_read_clear_intrbits_slave() once
Date: Thu, 22 Oct 2020 13:46:25 +0800	[thread overview]
Message-ID: <20201022054625.21969-1-michael.wu@vatics.com> (raw)

If some bits were cleared by i2c_dw_read_clear_intrbits_slave() in
i2c_dw_isr_slave() and not handled immediately, those cleared bits would
not be shown again by later i2c_dw_read_clear_intrbits_slave(). They
therefore were forgotten to be handled.

i2c_dw_read_clear_intrbits_slave() should be called once in an ISR and take
its returned state for all later handlings.

Signed-off-by: Michael Wu <michael.wu@vatics.com>
---

Changes in v2:
 - revert moving I2C_SLAVE_WRITE_REQUESTED reporting

 drivers/i2c/busses/i2c-designware-slave.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 44974b53a626..8eced99b7aeb 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -159,7 +159,6 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	u32 raw_stat, stat, enabled, tmp;
 	u8 val = 0, slave_activity;
 
-	regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
 	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
 	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &raw_stat);
 	regmap_read(dev->map, DW_IC_STATUS, &tmp);
@@ -168,6 +167,7 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY) || !dev->slave)
 		return 0;
 
+	stat = i2c_dw_read_clear_intrbits_slave(dev);
 	dev_dbg(dev->dev,
 		"%#x STATUS SLAVE_ACTIVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n",
 		enabled, slave_activity, raw_stat, stat);
@@ -188,11 +188,9 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 						 val);
 				}
 				regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp);
-				stat = i2c_dw_read_clear_intrbits_slave(dev);
 			} else {
 				regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp);
 				regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &tmp);
-				stat = i2c_dw_read_clear_intrbits_slave(dev);
 			}
 			if (!i2c_slave_event(dev->slave,
 					     I2C_SLAVE_READ_REQUESTED,
@@ -207,7 +205,6 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 			regmap_read(dev->map, DW_IC_CLR_RX_DONE, &tmp);
 
 		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
-		stat = i2c_dw_read_clear_intrbits_slave(dev);
 		return 1;
 	}
 
@@ -217,10 +214,8 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 		if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
 				     &val))
 			dev_vdbg(dev->dev, "Byte %X acked!", val);
-	} else {
+	} else
 		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
-		stat = i2c_dw_read_clear_intrbits_slave(dev);
-	}
 
 	return 1;
 }
@@ -230,7 +225,6 @@ static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
 	struct dw_i2c_dev *dev = dev_id;
 	int ret;
 
-	i2c_dw_read_clear_intrbits_slave(dev);
 	ret = i2c_dw_irq_handler_slave(dev);
 	if (ret > 0)
 		complete(&dev->cmd_complete);
-- 
2.17.1


             reply	other threads:[~2020-10-22  5:46 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-22  5:46 Michael Wu [this message]
2020-10-22 13:50 ` [PATCH v2] i2c: designware: call i2c_dw_read_clear_intrbits_slave() once Jarkko Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201022054625.21969-1-michael.wu@vatics.com \
    --to=michael.wu@vatics.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=jarkko.nikula@linux.intel.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=morgan.chang@vatics.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).