From: Mikko Perttunen <mperttunen@nvidia.com>
To: ldewangan@nvidia.com, digetx@gmail.com, thierry.reding@gmail.com,
jonathanh@nvidia.com, wsa@kernel.org
Cc: linux-i2c@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org,
Mikko Perttunen <mperttunen@nvidia.com>,
stable@vger.kernel.org
Subject: [PATCH] i2c: tegra: Wait for config load atomically while in ISR
Date: Mon, 11 Jan 2021 15:55:47 +0200 [thread overview]
Message-ID: <20210111135547.3613092-1-mperttunen@nvidia.com> (raw)
Upon a communication error, the interrupt handler can call
tegra_i2c_disable_packet_mode. This causes a sleeping poll to happen
unless the current transaction was marked atomic. Since
tegra_i2c_disable_packet_mode is only called from the interrupt path,
make it use atomic waiting always.
Fixes: ede2299f7101 ("i2c: tegra: Support atomic transfers")
Cc: stable@vger.kernel.org
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
This fixes constant spew for me while HDMI is connected to a
powered off television.
drivers/i2c/busses/i2c-tegra.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 6f08c0c3238d..4a7ff1840565 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -528,12 +528,12 @@ static void tegra_i2c_vi_init(struct tegra_i2c_dev *i2c_dev)
static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev,
u32 reg, u32 mask, u32 delay_us,
- u32 timeout_us)
+ u32 timeout_us, bool force_atomic)
{
void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg);
u32 val;
- if (!i2c_dev->atomic_mode)
+ if (!i2c_dev->atomic_mode && !force_atomic)
return readl_relaxed_poll_timeout(addr, val, !(val & mask),
delay_us, timeout_us);
@@ -560,7 +560,7 @@ static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
val |= mask;
i2c_writel(i2c_dev, val, offset);
- err = tegra_i2c_poll_register(i2c_dev, offset, mask, 1000, 1000000);
+ err = tegra_i2c_poll_register(i2c_dev, offset, mask, 1000, 1000000, false);
if (err) {
dev_err(i2c_dev->dev, "failed to flush FIFO\n");
return err;
@@ -569,7 +569,7 @@ static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
return 0;
}
-static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
+static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev, bool force_atomic)
{
int err;
@@ -579,7 +579,7 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
err = tegra_i2c_poll_register(i2c_dev, I2C_CONFIG_LOAD, 0xffffffff,
- 1000, I2C_CONFIG_LOAD_TIMEOUT);
+ 1000, I2C_CONFIG_LOAD_TIMEOUT, force_atomic);
if (err) {
dev_err(i2c_dev->dev, "failed to load config\n");
return err;
@@ -684,7 +684,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
if (i2c_dev->multimaster_mode && i2c_dev->hw->has_slcg_override_reg)
i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
- err = tegra_i2c_wait_for_config_load(i2c_dev);
+ err = tegra_i2c_wait_for_config_load(i2c_dev, false);
if (err)
return err;
@@ -707,7 +707,7 @@ static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
if (cnfg & I2C_CNFG_PACKET_MODE_EN)
i2c_writel(i2c_dev, cnfg & ~I2C_CNFG_PACKET_MODE_EN, I2C_CNFG);
- return tegra_i2c_wait_for_config_load(i2c_dev);
+ return tegra_i2c_wait_for_config_load(i2c_dev, true);
}
static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
@@ -1090,7 +1090,7 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
I2C_BC_TERMINATE;
i2c_writel(i2c_dev, val, I2C_BUS_CLEAR_CNFG);
- err = tegra_i2c_wait_for_config_load(i2c_dev);
+ err = tegra_i2c_wait_for_config_load(i2c_dev, false);
if (err)
return err;
--
2.30.0
next reply other threads:[~2021-01-11 13:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-11 13:55 Mikko Perttunen [this message]
2021-01-11 14:31 ` [PATCH] i2c: tegra: Wait for config load atomically while in ISR David Laight
2021-01-11 14:38 ` Mikko Perttunen
2021-01-11 15:14 ` Dmitry Osipenko
2021-01-11 15:52 ` Mikko Perttunen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210111135547.3613092-1-mperttunen@nvidia.com \
--to=mperttunen@nvidia.com \
--cc=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=ldewangan@nvidia.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=thierry.reding@gmail.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox