[PATCH v1] i2c: tegra: Use threaded interrupt

[Dmitry Osipenko <digetx@gmail.com>]

Switch to use threaded interrupt context in order to avoid checking of
"are we in interrupt?" for the code that may sleep in the IRQ handler.
I2C doesn't require a very low interrupt-handling latency, hence this
change doesn't introduce any noticeable effects.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/i2c/busses/i2c-tegra.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 0727383f4940..c4262408bae7 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -533,7 +533,7 @@ static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev,
 	void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg);
 	u32 val;
 
-	if (!i2c_dev->atomic_mode && !in_irq())
+	if (!i2c_dev->atomic_mode)
 		return readl_relaxed_poll_timeout(addr, val, !(val & mask),
 						  delay_us, timeout_us);
 
@@ -1719,9 +1719,10 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	/* interrupt will be enabled during of transfer time */
 	irq_set_status_flags(i2c_dev->irq, IRQ_NOAUTOEN);
 
-	err = devm_request_irq(i2c_dev->dev, i2c_dev->irq, tegra_i2c_isr,
-			       IRQF_NO_SUSPEND, dev_name(i2c_dev->dev),
-			       i2c_dev);
+	err = devm_request_threaded_irq(i2c_dev->dev, i2c_dev->irq,
+					NULL, tegra_i2c_isr,
+					IRQF_NO_SUSPEND | IRQF_ONESHOT,
+					dev_name(i2c_dev->dev), i2c_dev);
 	if (err)
 		return err;
 
-- 
2.29.2