From: Jean Delvare <jdelvare@suse.de>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: linux-i2c@vger.kernel.org
Subject: Re: [PATCH] i2c: i801: Use standard PCI constants instead of own ones
Date: Tue, 25 May 2021 11:42:44 +0200 [thread overview]
Message-ID: <20210525114244.05709ade@endymion> (raw)
In-Reply-To: <a4b704b1-278c-20bc-854f-8e1177a530f5@gmail.com>
On Sat, 22 May 2021 23:46:20 +0200, Heiner Kallweit wrote:
> Layout of these registers is part of the PCI standard. Therefore use
> the constants defined by the PCI subsystem.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> drivers/i2c/busses/i2c-i801.c | 20 ++++++--------------
> 1 file changed, 6 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index 738204d77..f6d7866f1 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -131,8 +131,6 @@
>
> /* PCI Address Constants */
> #define SMBBAR 4
> -#define SMBPCICTL 0x004
> -#define SMBPCISTS 0x006
> #define SMBHSTCFG 0x040
> #define TCOBASE 0x050
> #define TCOCTL 0x054
> @@ -141,12 +139,6 @@
> #define SBREG_SMBCTRL 0xc6000c
> #define SBREG_SMBCTRL_DNV 0xcf000c
>
> -/* Host status bits for SMBPCISTS */
> -#define SMBPCISTS_INTS BIT(3)
> -
> -/* Control bits for SMBPCICTL */
> -#define SMBPCICTL_INTDIS BIT(10)
> -
> /* Host configuration bits for SMBHSTCFG */
> #define SMBHSTCFG_HST_EN BIT(0)
> #define SMBHSTCFG_SMB_SMI_EN BIT(1)
> @@ -648,8 +640,8 @@ static irqreturn_t i801_isr(int irq, void *dev_id)
> u8 status;
>
> /* Confirm this is our interrupt */
> - pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
> - if (!(pcists & SMBPCISTS_INTS))
> + pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
> + if (!(pcists & PCI_STATUS_INTERRUPT))
> return IRQ_NONE;
>
> if (priv->features & FEATURE_HOST_NOTIFY) {
> @@ -1866,13 +1858,13 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
> u16 pcictl, pcists;
>
> /* Complain if an interrupt is already pending */
> - pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
> - if (pcists & SMBPCISTS_INTS)
> + pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
> + if (pcists & PCI_STATUS_INTERRUPT)
> dev_warn(&dev->dev, "An interrupt is pending!\n");
>
> /* Check if interrupts have been disabled */
> - pci_read_config_word(priv->pci_dev, SMBPCICTL, &pcictl);
> - if (pcictl & SMBPCICTL_INTDIS) {
> + pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pcictl);
> + if (pcictl & PCI_COMMAND_INTX_DISABLE) {
> dev_info(&dev->dev, "Interrupts are disabled\n");
> priv->features &= ~FEATURE_IRQ;
> }
Nice, thanks for the clean-up.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
--
Jean Delvare
SUSE L3 Support
next prev parent reply other threads:[~2021-05-25 9:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-22 21:46 [PATCH] i2c: i801: Use standard PCI constants instead of own ones Heiner Kallweit
2021-05-25 9:42 ` Jean Delvare [this message]
2021-05-27 20:10 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210525114244.05709ade@endymion \
--to=jdelvare@suse.de \
--cc=hkallweit1@gmail.com \
--cc=linux-i2c@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox