From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>,
linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Wolfram Sang <wsa@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 2/2] i2c: core: Propagate all possible errors when requesting recovery GPIOs
Date: Fri, 28 May 2021 12:13:51 +0300 [thread overview]
Message-ID: <20210528091351.70699-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210528091351.70699-1-andriy.shevchenko@linux.intel.com>
If GPIO is available but we can't get it by some other, than deferred probe,
reason, propagate it to the caller.
No functional change since i2c_register_adapter() still cares only about
deferred probe.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: made it as a series to avoid error when applying (LKP)
drivers/i2c/i2c-core-base.c | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index ae1b1b610aca..40b8aa91db9a 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -348,19 +348,20 @@ static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
* GPIO recovery is available
*/
if (!bri->scl_gpiod) {
- gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
- if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
+ gpiod = devm_gpiod_get_optional(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
+ if (IS_ERR(gpiod)) {
+ ret = PTR_ERR(gpiod);
goto cleanup_pinctrl_state;
}
- if (!IS_ERR(gpiod)) {
+
+ if (gpiod) {
bri->scl_gpiod = gpiod;
bri->recover_bus = i2c_generic_scl_recovery;
dev_info(dev, "using generic GPIOs for recovery\n");
}
}
- /* SDA GPIOD line is optional, so we care about DEFER only */
+ /* SDA GPIO line is optional */
if (!bri->sda_gpiod) {
/*
* We have SCL. Pull SCL low and wait a bit so that SDA glitches
@@ -368,18 +369,19 @@ static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
*/
gpiod_direction_output(bri->scl_gpiod, 0);
udelay(10);
- gpiod = devm_gpiod_get(dev, "sda", GPIOD_IN);
+
+ gpiod = devm_gpiod_get_optional(dev, "sda", GPIOD_IN);
/* Wait a bit in case of a SDA glitch, and then release SCL. */
udelay(10);
gpiod_direction_output(bri->scl_gpiod, 1);
- if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
+ if (IS_ERR(gpiod)) {
+ ret = PTR_ERR(gpiod);
goto cleanup_pinctrl_state;
}
- if (!IS_ERR(gpiod))
- bri->sda_gpiod = gpiod;
+
+ bri->sda_gpiod = gpiod;
}
cleanup_pinctrl_state:
@@ -401,12 +403,14 @@ static int i2c_init_recovery(struct i2c_adapter *adap)
struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
bool is_error_level = true;
char *err_str;
+ int ret;
if (!bri)
return 0;
- if (i2c_gpio_init_recovery(adap) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
+ ret = i2c_gpio_init_recovery(adap);
+ if (ret)
+ return ret;
if (!bri->recover_bus) {
err_str = "no suitable method provided";
--
2.30.2
next prev parent reply other threads:[~2021-05-28 9:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-28 9:13 [PATCH v2 1/2] i2c: core: Make debug message even more debuggish Andy Shevchenko
2021-05-28 9:13 ` Andy Shevchenko [this message]
2021-05-28 14:01 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210528091351.70699-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).