linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Mark Gross <markgross@kernel.org>,
	Andy Shevchenko <andy@infradead.org>,
	Wolfram Sang <wsa@the-dreams.de>,
	Sebastian Reichel <sre@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Ard Biesheuvel <ardb@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
	Yauhen Kharuzhy <jekhor@gmail.com>,
	Tsuchiya Yuto <kitakar@gmail.com>,
	platform-driver-x86@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-efi@vger.kernel.org
Subject: [PATCH 01/13] platform/x86: Rename touchscreen_dmi to dmi_device_properties
Date: Sat, 30 Oct 2021 20:28:01 +0200	[thread overview]
Message-ID: <20211030182813.116672-2-hdegoede@redhat.com> (raw)
In-Reply-To: <20211030182813.116672-1-hdegoede@redhat.com>

The ability to attach device-properties to (I2C) devices based on
a DMI + I2C device-name match to address the hw-description in
some ACPI tables being incomplete is useful for more things then just
touchscreens. Rename the Kconfig option and file to reflect this.

The specific use-case triggering this change is describing the
hardware surrounding the Whiskey Cove PMIC found on several
Cherry Trail based devices. At least 3 configs are known:

1. The WC PMIC is connected to a TI BQ24292i charger, paired with
   a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
   a PI3USB30532 USB switch, for a fully functional Type-C port

2. The WC PMIC is connected to a TI BQ25890 charger, paired with
   a TI BQ27520 fuelgauge, for a USB-2 only Type-C port without PD

3. The WC PMIC is connected to a TI BQ25890 charger, paired with
   a TI BQ27542 fuelgauge, for a micro-USB port

And various drivers (extcon-intel-cht-wc.c, i2c-cht-wc.c, ...) need
to know which config they are dealing with.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 MAINTAINERS                                   |  2 +-
 drivers/firmware/efi/embedded-firmware.c      |  4 ++--
 drivers/platform/x86/Kconfig                  | 20 ++++++++++---------
 drivers/platform/x86/Makefile                 |  2 +-
 ...chscreen_dmi.c => dmi_device_properties.c} |  8 ++++----
 include/linux/efi_embedded_fw.h               |  2 +-
 6 files changed, 20 insertions(+), 18 deletions(-)
 rename drivers/platform/x86/{touchscreen_dmi.c => dmi_device_properties.c} (99%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 09abc1d84a7f..fe6a952c0232 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17156,7 +17156,7 @@ L:	linux-input@vger.kernel.org
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/input/touchscreen/silead.c
-F:	drivers/platform/x86/touchscreen_dmi.c
+F:	drivers/platform/x86/dmi_device_properties.c
 
 SILICON LABS WIRELESS DRIVERS (for WFxxx series)
 M:	Jérôme Pouiller <jerome.pouiller@silabs.com>
diff --git a/drivers/firmware/efi/embedded-firmware.c b/drivers/firmware/efi/embedded-firmware.c
index f5be8e22305b..f8212af0ba5e 100644
--- a/drivers/firmware/efi/embedded-firmware.c
+++ b/drivers/firmware/efi/embedded-firmware.c
@@ -21,8 +21,8 @@ bool efi_embedded_fw_checked;
 EXPORT_SYMBOL_NS_GPL(efi_embedded_fw_checked, TEST_FIRMWARE);
 
 static const struct dmi_system_id * const embedded_fw_table[] = {
-#ifdef CONFIG_TOUCHSCREEN_DMI
-	touchscreen_dmi_table,
+#ifdef CONFIG_DMI_DEVICE_PROPERTIES
+	dmi_device_properties,
 #endif
 	NULL
 };
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index b110a2e6b8f3..9cb8d33cc6e1 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -981,17 +981,19 @@ config MLX_PLATFORM
 
 	  If you have a Mellanox system, say Y or M here.
 
-config TOUCHSCREEN_DMI
-	bool "DMI based touchscreen configuration info"
-	depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD
+config DMI_DEVICE_PROPERTIES
+	bool "DMI based extra device properties"
+	depends on ACPI && DMI && I2C=y
 	select EFI_EMBEDDED_FIRMWARE if EFI
 	help
-	  Certain ACPI based tablets with e.g. Silead or Chipone touchscreens
-	  do not have enough data in ACPI tables for the touchscreen driver to
-	  handle the touchscreen properly, as OEMs expect the data to be baked
-	  into the tablet model specific version of the driver shipped with the
-	  the OS-image for the device. This option supplies the missing info.
-	  Enable this for x86 tablets with Silead or Chipone touchscreens.
+	  Sometimes ACPI based x86 devices do not have enough data in their ACPI
+	  tables to fully describe the hardware. This option enables support for
+	  supplying the missing info based on DMI (vendor & model string)
+	  matching for devices where this info has been added to the
+	  dmi-device-properties code.
+
+	  This option is often necessary for correct operation of x86 based
+	  tablets and 2-in-1 devices. If in doubt, say Y here.
 
 config FW_ATTR_CLASS
 	tristate
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 219478061683..3f610332b556 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -107,10 +107,10 @@ obj-$(CONFIG_SYSTEM76_ACPI)	+= system76_acpi.o
 obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
 
 # Platform drivers
+obj-$(CONFIG_DMI_DEVICE_PROPERTIES)	+= dmi_device_properties.o
 obj-$(CONFIG_FW_ATTR_CLASS)		+= firmware_attributes_class.o
 obj-$(CONFIG_I2C_MULTI_INSTANTIATE)	+= i2c-multi-instantiate.o
 obj-$(CONFIG_MLX_PLATFORM)		+= mlx-platform.o
-obj-$(CONFIG_TOUCHSCREEN_DMI)		+= touchscreen_dmi.o
 obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o
 
 # Intel uncore drivers
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/dmi_device_properties.c
similarity index 99%
rename from drivers/platform/x86/touchscreen_dmi.c
rename to drivers/platform/x86/dmi_device_properties.c
index b5d007875423..1bcd14a0bc78 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/dmi_device_properties.c
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Touchscreen driver DMI based configuration code
+ * DMI based device-property addition (adding info missing from ACPI tables)
  *
- * Copyright (c) 2017 Red Hat Inc.
+ * Copyright (c) 2017-2021 Red Hat Inc.
  *
  * Red Hat authors:
  * Hans de Goede <hdegoede@redhat.com>
@@ -979,7 +979,7 @@ static const struct ts_dmi_data vinga_twizzle_j116_data = {
 };
 
 /* NOTE: Please keep this table sorted alphabetically */
-const struct dmi_system_id touchscreen_dmi_table[] = {
+const struct dmi_system_id dmi_device_properties[] = {
 	{
 		/* Chuwi Hi8 */
 		.driver_data = (void *)&chuwi_hi8_data,
@@ -1633,7 +1633,7 @@ static int __init ts_dmi_init(void)
 	const struct dmi_system_id *dmi_id;
 	int error;
 
-	dmi_id = dmi_first_match(touchscreen_dmi_table);
+	dmi_id = dmi_first_match(dmi_device_properties);
 	if (!dmi_id)
 		return 0; /* Not an error */
 
diff --git a/include/linux/efi_embedded_fw.h b/include/linux/efi_embedded_fw.h
index a97a12bb2c9e..01105c38a309 100644
--- a/include/linux/efi_embedded_fw.h
+++ b/include/linux/efi_embedded_fw.h
@@ -34,7 +34,7 @@ struct efi_embedded_fw_desc {
 	u8 sha256[32];
 };
 
-extern const struct dmi_system_id touchscreen_dmi_table[];
+extern const struct dmi_system_id dmi_device_properties[];
 
 int efi_get_embedded_fw(const char *name, const u8 **dat, size_t *sz);
 
-- 
2.31.1


  reply	other threads:[~2021-10-30 18:28 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-30 18:28 [PATCH 00/13] power-suppy/i2c/extcon: Add support for cht-wc PMIC without USB-PD support Hans de Goede
2021-10-30 18:28 ` Hans de Goede [this message]
2021-10-30 19:07   ` [PATCH 01/13] platform/x86: Rename touchscreen_dmi to dmi_device_properties Randy Dunlap
2021-10-30 18:28 ` [PATCH 02/13] platform/x86: dmi_device_properties: Add setup info for boards with a CHT Whiskey Cove PMIC Hans de Goede
2021-10-30 21:56   ` Andy Shevchenko
2021-11-08 15:48     ` Hans de Goede
2021-10-30 18:28 ` [PATCH 03/13] power: supply: bq25890: Fix race causing oops at boot Hans de Goede
2021-11-02 16:28   ` Sebastian Reichel
2021-10-30 18:28 ` [PATCH 04/13] power: supply: bq25890: Fix initial setting of the F_CONV_RATE field Hans de Goede
2021-11-02 16:29   ` Sebastian Reichel
2021-10-30 18:28 ` [PATCH 05/13] power: supply: bq25890: Add a bq25890_rw_init_data() helper Hans de Goede
2021-10-30 18:28 ` [PATCH 06/13] power: supply: bq25890: Add support for skipping initialization Hans de Goede
2021-10-30 22:07   ` Andy Shevchenko
2021-11-08 15:57     ` Hans de Goede
2021-10-30 18:28 ` [PATCH 07/13] power: supply: bq25890: Enable charging on boards where we skip reset Hans de Goede
2021-11-07 18:32   ` Yauhen Kharuzhy
2021-10-30 18:28 ` [PATCH 08/13] power: supply: bq25890: Drop dev->platform_data == NULL check Hans de Goede
2021-10-30 18:28 ` [PATCH 09/13] power: supply: bq25890: Add bq25890_set_otg_cfg() helper Hans de Goede
2021-10-30 22:10   ` Andy Shevchenko
2021-11-08 15:59     ` Hans de Goede
2021-11-07 18:49   ` Yauhen Kharuzhy
2021-11-07 19:47     ` Hans de Goede
2021-10-30 18:28 ` [PATCH 10/13] power: supply: bq25890: Add support for registering the Vbus boost converter as a regulator Hans de Goede
2021-10-30 22:13   ` Andy Shevchenko
2021-11-08 16:06     ` Hans de Goede
2021-10-30 18:28 ` [PATCH 11/13] i2c: cht-wc: Add support for devices using a bq25890 charger Hans de Goede
2021-10-31 17:58   ` Wolfram Sang
2021-11-08 16:03     ` Hans de Goede
2021-11-07 19:07   ` Yauhen Kharuzhy
2021-11-07 19:35     ` Yauhen Kharuzhy
2021-11-07 19:51     ` Hans de Goede
2021-10-30 18:28 ` [PATCH 12/13] extcon: intel-cht-wc: Check new "intel,cht-wc-setup" device-property Hans de Goede
2021-10-30 18:28 ` [PATCH 13/13] extcon: intel-cht-wc: Add support for devices with an USB-micro-B connector Hans de Goede
2021-10-31 12:52   ` Andy Shevchenko
2021-11-08 15:44     ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211030182813.116672-2-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=andy@infradead.org \
    --cc=ardb@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=jekhor@gmail.com \
    --cc=kitakar@gmail.com \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=markgross@kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=sre@kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).