linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Joakim Tjernlund <joakim.tjernlund@infinera.com>,
	Scott Wood <oss@buserror.net>, Wolfram Sang <wsa@kernel.org>,
	Sasha Levin <sashal@kernel.org>,
	chris.packham@alliedtelesis.co.nz, linux-i2c@vger.kernel.org
Subject: [PATCH AUTOSEL 5.16 11/52] i2c: mpc: Correct I2C reset procedure
Date: Mon, 17 Jan 2022 11:58:12 -0500	[thread overview]
Message-ID: <20220117165853.1470420-11-sashal@kernel.org> (raw)
In-Reply-To: <20220117165853.1470420-1-sashal@kernel.org>

From: Joakim Tjernlund <joakim.tjernlund@infinera.com>

[ Upstream commit ebe82cf92cd4825c3029434cabfcd2f1780e64be ]

Current I2C reset procedure is broken in two ways:
1) It only generate 1 START instead of 9 STARTs and STOP.
2) It leaves the bus Busy so every I2C xfer after the first
   fixup calls the reset routine again, for every xfer there after.

This fixes both errors.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mpc.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index db26cc36e13fe..6c698c10d3cdb 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -119,23 +119,30 @@ static inline void writeccr(struct mpc_i2c *i2c, u32 x)
 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
  * the bus, because it wants to send ACK.
  * Following sequence of enabling/disabling and sending start/stop generates
- * the 9 pulses, so it's all OK.
+ * the 9 pulses, each with a START then ending with STOP, so it's all OK.
  */
 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 {
 	int k;
-	u32 delay_val = 1000000 / i2c->real_clk + 1;
-
-	if (delay_val < 2)
-		delay_val = 2;
+	unsigned long flags;
 
 	for (k = 9; k; k--) {
 		writeccr(i2c, 0);
-		writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+		writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */
+		writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */
+		readb(i2c->base + MPC_I2C_DR); /* init xfer */
+		udelay(15); /* let it hit the bus */
+		local_irq_save(flags); /* should not be delayed further */
+		writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */
 		readb(i2c->base + MPC_I2C_DR);
-		writeccr(i2c, CCR_MEN);
-		udelay(delay_val << 1);
+		if (k != 1)
+			udelay(5);
+		local_irq_restore(flags);
 	}
+	writeccr(i2c, CCR_MEN); /* Initiate STOP */
+	readb(i2c->base + MPC_I2C_DR);
+	udelay(15); /* Let STOP propagate */
+	writeccr(i2c, 0);
 }
 
 static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
-- 
2.34.1


  parent reply	other threads:[~2022-01-17 17:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220117165853.1470420-1-sashal@kernel.org>
2022-01-17 16:58 ` [PATCH AUTOSEL 5.16 09/52] i2c: i801: Don't silently correct invalid transfer size Sasha Levin
2022-01-17 16:58 ` Sasha Levin [this message]
2022-01-17 16:58 ` [PATCH AUTOSEL 5.16 35/52] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220117165853.1470420-11-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=chris.packham@alliedtelesis.co.nz \
    --cc=joakim.tjernlund@infinera.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=oss@buserror.net \
    --cc=stable@vger.kernel.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).