Re: [PATCH i2c-tools] i2cget: add mode character for SMBus block read to manpage

[Jean Delvare <jdelvare@suse.de>]

On Wed, 30 Mar 2022 12:20:28 +0200, Wolfram Sang wrote:
> The text was updated, but the mode character was forgotten.
> 
> Fixes: 789af53 ("i2cget: Add support for SMBus block read")
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>  tools/i2cget.8 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/tools/i2cget.8 b/tools/i2cget.8
> index 83c6f7d..a836341 100644
> --- a/tools/i2cget.8
> +++ b/tools/i2cget.8
> @@ -49,7 +49,7 @@ an integer between 0x00 and 0xFF. If omitted, the currently active register
>  will be read (if that makes sense for the considered chip).
>  .PP
>  The \fImode\fR parameter, if specified, is one of the letters \fBb\fP,
> -\fBw\fP, \fBc\fP, or \fBi\fP, corresponding to a read byte data, a read
> +\fBw\fP, \fBc\fP, \fBs\fP, or \fBi\fP, corresponding to a read byte data, a read
>  word data, a write byte/read byte, an SMBus block read, or an I2C block read
>  transaction, respectively. A \fBp\fP can also be appended to the \fImode\fR
>  parameter to enable PEC, except for I2C block transactions. If the \fImode\fR

That's odd, but indeed it was forgotten. Thanks for noticing.

Reviewed-by: Jean Delvare <jdelvare@suse.de>

-- 
Jean Delvare
SUSE L3 Support