linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Vinod Koul <vkoul@kernel.org>, Wolfram Sang <wsa@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()
Date: Sat, 16 Jul 2022 20:50:26 -0700	[thread overview]
Message-ID: <20220717035027.2135106-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20220717035027.2135106-1-bjorn.andersson@linaro.org>

Waiting for M_CMD_ABORT_EN in geni_i2c_abort_xfer() races with the
interrupt handler which will read and clear the abort bit, the result is
that every abort attempt takes 1 second and is followed by a message
about the abort having times out.

Introduce a new state variable to carry the abort_done state from the
interrupt handler back to geni_i2c_abort_xfer().

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 3bec7c782824..e212e7ae7ad2 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -97,6 +97,7 @@ struct geni_i2c_dev {
 	struct dma_chan *tx_c;
 	struct dma_chan *rx_c;
 	bool gpi_mode;
+	bool abort_done;
 };
 
 struct geni_i2c_err_log {
@@ -203,9 +204,14 @@ static void geni_i2c_err(struct geni_i2c_dev *gi2c, int err)
 		dev_dbg(gi2c->se.dev, "len:%d, slv-addr:0x%x, RD/WR:%d\n",
 			gi2c->cur->len, gi2c->cur->addr, gi2c->cur->flags);
 
-	if (err != NACK && err != GENI_ABORT_DONE) {
+	switch (err) {
+	case GENI_ABORT_DONE:
+		gi2c->abort_done = true;
+		break;
+	default:
 		dev_err(gi2c->se.dev, "%s\n", gi2c_log[err].msg);
 		geni_i2c_err_misc(gi2c);
+		break;
 	}
 }
 
@@ -311,21 +317,21 @@ static irqreturn_t geni_i2c_irq(int irq, void *dev)
 
 static void geni_i2c_abort_xfer(struct geni_i2c_dev *gi2c)
 {
-	u32 val;
 	unsigned long time_left = ABORT_TIMEOUT;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gi2c->lock, flags);
 	geni_i2c_err(gi2c, GENI_TIMEOUT);
 	gi2c->cur = NULL;
+	gi2c->abort_done = false;
 	geni_se_abort_m_cmd(&gi2c->se);
 	spin_unlock_irqrestore(&gi2c->lock, flags);
+
 	do {
 		time_left = wait_for_completion_timeout(&gi2c->done, time_left);
-		val = readl_relaxed(gi2c->se.base + SE_GENI_M_IRQ_STATUS);
-	} while (!(val & M_CMD_ABORT_EN) && time_left);
+	} while (!gi2c->abort_done && time_left);
 
-	if (!(val & M_CMD_ABORT_EN))
+	if (!time_left)
 		dev_err(gi2c->se.dev, "Timeout abort_m_cmd\n");
 }
 
-- 
2.35.1


  parent reply	other threads:[~2022-07-17  3:48 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-17  3:50 [PATCH 0/3] i2c: qcom-geni: Make it possible to run i2cdetect Bjorn Andersson
2022-07-17  3:50 ` [PATCH 1/3] i2c: qcom-geni: Use the correct return value Bjorn Andersson
2022-07-18  5:36   ` Vinod Koul
2022-07-18 22:28     ` Bjorn Andersson
2022-07-19 20:36   ` Andrew Halaney
2022-07-20  4:31   ` Vinod Koul
2022-07-24  5:04   ` Wolfram Sang
2022-07-24  7:30     ` Johan Hovold
2022-07-24 18:37       ` Wolfram Sang
2022-07-24 18:39     ` Wolfram Sang
2022-07-17  3:50 ` Bjorn Andersson [this message]
2022-07-18  5:36   ` [PATCH 2/3] i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer() Vinod Koul
2022-07-19 20:50   ` Andrew Halaney
2022-07-19 20:57     ` Andrew Halaney
2022-07-24  5:15       ` Wolfram Sang
2022-07-24  5:15   ` Wolfram Sang
2022-07-17  3:50 ` [PATCH 3/3] i2c: qcom-geni: Silence NACK and GENI_TIMEOUT Bjorn Andersson
2022-07-18  5:37   ` Vinod Koul
2022-07-24  5:23   ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220717035027.2135106-3-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=konrad.dybcio@somainline.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vkoul@kernel.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).