From: <kewei.xu@mediatek.com>
To: <wsa@the-dreams.de>
Cc: <matthias.bgg@gmail.com>, <robh+dt@kernel.org>,
<linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <leilk.liu@mediatek.com>,
<qii.wang@mediatek.com>, <liguo.zhang@mediatek.com>,
<caiyu.chen@mediatek.com>, <housong.zhang@mediatek.com>,
<yuhan.wei@mediatek.com>, <kewei.xu@mediatek.com>,
<ryan-jh.yu@mediatek.com>, <david-yh.chiu@mediatek.com>
Subject: [PATCH v5 2/2] i2c: mediatek: add i2c compatible for MT8188
Date: Sat, 6 Aug 2022 18:02:49 +0800 [thread overview]
Message-ID: <20220806100249.12375-2-kewei.xu@mediatek.com> (raw)
In-Reply-To: <20220806100249.12375-1-kewei.xu@mediatek.com>
From: Kewei Xu <kewei.xu@mediatek.com>
Add i2c compatible for MT8188 and added mt_i2c_regs_v3[], since
MT8188 i2c OFFSET_SLAVE_ADDR register changed from 0x04 to 0x94.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v5: modify the order of mt_i2c_regs_v3[] members and add Reviewed-by owner.
v4: no changes
V3: no changes
V2: added mt_i2c_regs_v3[] to replace slave_addr_version.
---
drivers/i2c/busses/i2c-mt65xx.c | 43 +++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 8e6985354fd5..bd8abba3d1c9 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -229,6 +229,35 @@ static const u16 mt_i2c_regs_v2[] = {
[OFFSET_DCM_EN] = 0xf88,
};
+static const u16 mt_i2c_regs_v3[] = {
+ [OFFSET_DATA_PORT] = 0x0,
+ [OFFSET_INTR_MASK] = 0x8,
+ [OFFSET_INTR_STAT] = 0xc,
+ [OFFSET_CONTROL] = 0x10,
+ [OFFSET_TRANSFER_LEN] = 0x14,
+ [OFFSET_TRANSAC_LEN] = 0x18,
+ [OFFSET_DELAY_LEN] = 0x1c,
+ [OFFSET_TIMING] = 0x20,
+ [OFFSET_START] = 0x24,
+ [OFFSET_EXT_CONF] = 0x28,
+ [OFFSET_LTIMING] = 0x2c,
+ [OFFSET_HS] = 0x30,
+ [OFFSET_IO_CONFIG] = 0x34,
+ [OFFSET_FIFO_ADDR_CLR] = 0x38,
+ [OFFSET_SDA_TIMING] = 0x3c,
+ [OFFSET_TRANSFER_LEN_AUX] = 0x44,
+ [OFFSET_CLOCK_DIV] = 0x48,
+ [OFFSET_SOFTRESET] = 0x50,
+ [OFFSET_MULTI_DMA] = 0x8c,
+ [OFFSET_SCL_MIS_COMP_POINT] = 0x90,
+ [OFFSET_SLAVE_ADDR] = 0x94,
+ [OFFSET_DEBUGSTAT] = 0xe4,
+ [OFFSET_DEBUGCTRL] = 0xe8,
+ [OFFSET_FIFO_STAT] = 0xf4,
+ [OFFSET_FIFO_THRESH] = 0xf8,
+ [OFFSET_DCM_EN] = 0xf88,
+};
+
struct mtk_i2c_compatible {
const struct i2c_adapter_quirks *quirks;
const u16 *regs;
@@ -442,6 +471,19 @@ static const struct mtk_i2c_compatible mt8186_compat = {
.max_dma_support = 36,
};
+static const struct mtk_i2c_compatible mt8188_compat = {
+ .regs = mt_i2c_regs_v3,
+ .pmic_i2c = 0,
+ .dcm = 0,
+ .auto_restart = 1,
+ .aux_len_reg = 1,
+ .timing_adjust = 1,
+ .dma_sync = 0,
+ .ltiming_adjust = 1,
+ .apdma_sync = 1,
+ .max_dma_support = 36,
+};
+
static const struct mtk_i2c_compatible mt8192_compat = {
.quirks = &mt8183_i2c_quirks,
.regs = mt_i2c_regs_v2,
@@ -465,6 +507,7 @@ static const struct of_device_id mtk_i2c_of_match[] = {
{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
{ .compatible = "mediatek,mt8186-i2c", .data = &mt8186_compat },
+ { .compatible = "mediatek,mt8188-i2c", .data = &mt8188_compat },
{ .compatible = "mediatek,mt8192-i2c", .data = &mt8192_compat },
{}
};
--
2.18.0
next prev parent reply other threads:[~2022-08-06 10:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-06 10:02 [PATCH v5 1/2] dt-bindngs: i2c: update bindings for mt8188 soc kewei.xu
2022-08-06 10:02 ` kewei.xu [this message]
2022-08-08 1:44 ` [PATCH v5 2/2] i2c: mediatek: add i2c compatible for MT8188 Qii Wang
2022-08-11 12:34 ` Wolfram Sang
2022-08-08 1:45 ` [PATCH v5 1/2] dt-bindngs: i2c: update bindings for mt8188 soc Qii Wang
2022-08-11 12:34 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220806100249.12375-2-kewei.xu@mediatek.com \
--to=kewei.xu@mediatek.com \
--cc=caiyu.chen@mediatek.com \
--cc=david-yh.chiu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=housong.zhang@mediatek.com \
--cc=leilk.liu@mediatek.com \
--cc=liguo.zhang@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=qii.wang@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=ryan-jh.yu@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=wsa@the-dreams.de \
--cc=yuhan.wei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox