From: Alexandre Mergnat <amergnat@baylibre.com>
To: Qii Wang <qii.wang@mediatek.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
Fabien Parent <fparent@baylibre.com>,
Rob Herring <robh@kernel.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Alexandre Mergnat <amergnat@baylibre.com>
Subject: [PATCH v6 1/2] arm64: dts: mediatek: add i2c support for mt8365 SoC
Date: Tue, 28 Mar 2023 11:04:47 +0200 [thread overview]
Message-ID: <20221122-mt8365-i2c-support-v6-1-e1009c8afd53@baylibre.com> (raw)
In-Reply-To: <20221122-mt8365-i2c-support-v6-0-e1009c8afd53@baylibre.com>
There are four I2C master channels in MT8365 with a same HW architecture.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8365.dtsi | 48 ++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 15ac4c1f0966..b70f4d256f63 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -282,6 +282,42 @@ pwm: pwm@11006000 {
clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+ reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C0_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+ reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C1_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+ reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C2_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi: spi@1100a000 {
compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi";
reg = <0 0x1100a000 0 0x100>;
@@ -295,6 +331,18 @@ spi: spi@1100a000 {
status = "disabled";
};
+ i2c3: i2c@1100f000 {
+ compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+ reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C3_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
ssusb: usb@11201000 {
compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>;
--
2.25.1
next prev parent reply other threads:[~2023-03-28 9:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-28 9:04 [PATCH v6 0/2] Add MediaTek MT8365 I2C support Alexandre Mergnat
2023-03-28 9:04 ` Alexandre Mergnat [this message]
2023-03-28 9:04 ` [PATCH v6 2/2] arm64: dts: mediatek: enable i2c0 for mt8365-evk board Alexandre Mergnat
2023-03-28 10:04 ` AngeloGioacchino Del Regno
2023-03-28 13:10 ` Alexandre Mergnat
2023-03-30 17:14 ` Matthias Brugger
2023-03-31 12:23 ` Alexandre Mergnat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221122-mt8365-i2c-support-v6-1-e1009c8afd53@baylibre.com \
--to=amergnat@baylibre.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=fparent@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=qii.wang@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox