[PATCH v3 3/3] i2c: mpc: Use i2c-scl-clk-low-timeout-ms i2c property

[Andi Shyti <andi.shyti@kernel.org>]

"fsl,timeout" is marked as deprecated and replaced by the
"i2c-scl-clk-low-timeout-ms" i2c property.

Use this latter and, in case it is missing, for back
compatibility, check whether we still have "fsl,timeout" defined.

Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/i2c/busses/i2c-mpc.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 87e5c1725750..28f11e30ac50 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -843,8 +843,18 @@ static int fsl_i2c_probe(struct platform_device *op)
 			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
 	}
 
+	/*
+	 * "fsl,timeout" has been marked as deprecated and, to maintain
+	 * backward compatibility, we will only look for it if
+	 * "i2c-scl-clk-low-timeout-ms" is not present.
+	 */
 	result = of_property_read_u32(op->dev.of_node,
-				      "fsl,timeout", &mpc_ops.timeout);
+				      "i2c-scl-clk-low-timeout-ms",
+				      &mpc_ops.timeout);
+	if (result == -EINVAL)
+		result = of_property_read_u32(op->dev.of_node,
+					      "fsl,timeout", &mpc_ops.timeout);
+
 	if (!result) {
 		mpc_ops.timeout *= HZ / 1000000;
 		if (mpc_ops.timeout < 5)
-- 
2.39.2