public inbox for linux-i2c@vger.kernel.org
 help / color / mirror / Atom feed
From: Alain Volmat <alain.volmat@foss.st.com>
To: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
	Alyssa Rosenzweig <alyssa@rosenzweig.io>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Michal Simek <michal.simek@xilinx.com>,
	Peter Rosin <peda@axentia.se>, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	<devicetree@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <asahi@lists.linux.dev>,
	<linux-amlogic@lists.infradead.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-i2c@vger.kernel.org>
Subject: Re: [Linux-stm32] [PATCH] dt-bindings: i2c: Drop unneeded quotes
Date: Thu, 23 Mar 2023 14:41:56 +0100	[thread overview]
Message-ID: <20230323134156.GA4017557@gnbcxd0016.gnb.st.com> (raw)
In-Reply-To: <20230322173530.3971676-1-robh@kernel.org>

On Wed, Mar 22, 2023 at 12:35:29PM -0500, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml | 4 ++--
>  Documentation/devicetree/bindings/i2c/apple,i2c.yaml          | 4 ++--
>  Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml  | 2 +-
>  Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml     | 4 ++--
>  Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml       | 4 ++--
>  Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 4 ++--
>  Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml       | 2 +-

Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>

>  .../devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml          | 4 ++--
>  8 files changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
> index 199a354ccb97..26bed558c6b8 100644
> --- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
> @@ -2,8 +2,8 @@
>  # Copyright 2019 BayLibre, SAS
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: Amlogic Meson I2C Controller
>  
> diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
> index 4ac61fec90e2..243da7003cec 100644
> --- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
> @@ -1,8 +1,8 @@
>  # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/i2c/apple,i2c.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: Apple/PASemi I2C controller
>  
> diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
> index ea2303c0e143..6adedd3ec399 100644
> --- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
> @@ -75,7 +75,7 @@ required:
>    - clocks
>  
>  allOf:
> -  - $ref: "i2c-controller.yaml"
> +  - $ref: i2c-controller.yaml
>    - if:
>        properties:
>          compatible:
> diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
> index 2e95cda7262a..7a675aa08c44 100644
> --- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
> +++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
> @@ -1,8 +1,8 @@
>  # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: Cadence I2C controller
>  
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
> index 6e0a5686af04..f34cc7ad5a00 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
> @@ -45,7 +45,7 @@ properties:
>  
>    i2c-parent:
>      description: phandle of the I2C bus that this multiplexer's master-side port is connected to
> -    $ref: "/schemas/types.yaml#/definitions/phandle"
> +    $ref: /schemas/types.yaml#/definitions/phandle
>  
>    mux-gpios:
>      description: list of GPIOs used to control the muxer
> @@ -55,7 +55,7 @@ properties:
>    idle-state:
>      description: Value to set the muxer to when idle. When no value is given, it defaults to the
>        last value used.
> -    $ref: "/schemas/types.yaml#/definitions/uint32"
> +    $ref: /schemas/types.yaml#/definitions/uint32
>  
>  allOf:
>    - $ref: i2c-mux.yaml
> diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> index 0e88c85985b5..9f66a3bb1f80 100644
> --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> @@ -1,8 +1,8 @@
>  # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: Qualcomm Geni based QUP I2C Controller
>  
> diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> index bf396e9466aa..94b75d9f66cd 100644
> --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> @@ -90,7 +90,7 @@ properties:
>    st,syscfg-fmp:
>      description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
>        Plus speed is selected by slave.
> -    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>      items:
>        - items:
>            - description: phandle to syscfg
> diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
> index 1b598638d457..658ae92fa86d 100644
> --- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
> +++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
> @@ -1,8 +1,8 @@
>  # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: Xilinx IIC controller
>  
> -- 
> 2.39.2
> 
> _______________________________________________
> Linux-stm32 mailing list
> Linux-stm32@st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32

Regards,
Alain


  parent reply	other threads:[~2023-03-23 13:43 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-22 17:35 [PATCH] dt-bindings: i2c: Drop unneeded quotes Rob Herring
2023-03-23  7:32 ` Krzysztof Kozlowski
2023-03-23  9:11 ` Neil Armstrong
2023-03-23  9:51 ` Nicolas Ferre
2023-03-23 13:41 ` Alain Volmat [this message]
2023-03-29 19:29 ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230323134156.GA4017557@gnbcxd0016.gnb.st.com \
    --to=alain.volmat@foss.st.com \
    --cc=agross@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=alyssa@rosenzweig.io \
    --cc=andersson@kernel.org \
    --cc=asahi@lists.linux.dev \
    --cc=claudiu.beznea@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=marcan@marcan.st \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=michal.simek@xilinx.com \
    --cc=neil.armstrong@linaro.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=peda@axentia.se \
    --cc=robh@kernel.org \
    --cc=sven@svenpeter.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox