From: Jiawen Wu <jiawenwu@trustnetic.com>
To: netdev@vger.kernel.org, linux@armlinux.org.uk
Cc: linux-i2c@vger.kernel.org, linux-gpio@vger.kernel.org,
olteanv@gmail.com, mengyuanlou@net-swift.com,
Jiawen Wu <jiawenwu@trustnetic.com>,
Jose Abreu <Jose.Abreu@synopsys.com>
Subject: [PATCH net-next v3 6/8] net: pcs: Add 10GBASE-R mode for Synopsys Designware XPCS
Date: Wed, 19 Apr 2023 16:27:37 +0800 [thread overview]
Message-ID: <20230419082739.295180-7-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20230419082739.295180-1-jiawenwu@trustnetic.com>
Add basic support for XPCS using 10GBASE-R interface. This mode will
be extended to use interrupt, so set pcs.poll false. And avoid soft
reset so that the device using this mode is in the default configuration.
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/pcs/pcs-xpcs.c | 58 ++++++++++++++++++++++++++++++++++++
include/linux/pcs/pcs-xpcs.h | 1 +
2 files changed, 59 insertions(+)
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 539cd43eae8d..58a417edfb4d 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -64,6 +64,16 @@ static const int xpcs_xlgmii_features[] = {
__ETHTOOL_LINK_MODE_MASK_NBITS,
};
+static const int xpcs_10gbaser_features[] = {
+ ETHTOOL_LINK_MODE_Pause_BIT,
+ ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
+ __ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
static const int xpcs_sgmii_features[] = {
ETHTOOL_LINK_MODE_Pause_BIT,
ETHTOOL_LINK_MODE_Asym_Pause_BIT,
@@ -106,6 +116,10 @@ static const phy_interface_t xpcs_xlgmii_interfaces[] = {
PHY_INTERFACE_MODE_XLGMII,
};
+static const phy_interface_t xpcs_10gbaser_interfaces[] = {
+ PHY_INTERFACE_MODE_10GBASER,
+};
+
static const phy_interface_t xpcs_sgmii_interfaces[] = {
PHY_INTERFACE_MODE_SGMII,
};
@@ -123,6 +137,7 @@ enum {
DW_XPCS_USXGMII,
DW_XPCS_10GKR,
DW_XPCS_XLGMII,
+ DW_XPCS_10GBASER,
DW_XPCS_SGMII,
DW_XPCS_1000BASEX,
DW_XPCS_2500BASEX,
@@ -246,6 +261,7 @@ static int xpcs_soft_reset(struct dw_xpcs *xpcs,
switch (compat->an_mode) {
case DW_AN_C73:
+ case DW_10GBASER:
dev = MDIO_MMD_PCS;
break;
case DW_AN_C37_SGMII:
@@ -872,6 +888,8 @@ int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
return -ENODEV;
switch (compat->an_mode) {
+ case DW_10GBASER:
+ break;
case DW_AN_C73:
if (phylink_autoneg_inband(mode)) {
ret = xpcs_config_aneg_c73(xpcs, compat);
@@ -919,6 +937,29 @@ static int xpcs_config(struct phylink_pcs *pcs, unsigned int mode,
return xpcs_do_config(xpcs, interface, mode, advertising);
}
+static int xpcs_get_state_10gbaser(struct dw_xpcs *xpcs,
+ struct phylink_link_state *state)
+{
+ int ret;
+
+ state->link = false;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT1);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MDIO_STAT1_LSTATUS)
+ state->link = true;
+
+ if (state->link) {
+ state->pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
+ state->duplex = DUPLEX_FULL;
+ state->speed = SPEED_10000;
+ }
+
+ return 0;
+}
+
static int xpcs_get_state_c73(struct dw_xpcs *xpcs,
struct phylink_link_state *state,
const struct xpcs_compat *compat)
@@ -1033,6 +1074,14 @@ static void xpcs_get_state(struct phylink_pcs *pcs,
return;
switch (compat->an_mode) {
+ case DW_10GBASER:
+ ret = xpcs_get_state_10gbaser(xpcs, state);
+ if (ret) {
+ pr_err("xpcs_get_state_10gbaser returned %pe\n",
+ ERR_PTR(ret));
+ return;
+ }
+ break;
case DW_AN_C73:
ret = xpcs_get_state_c73(xpcs, state, compat);
if (ret) {
@@ -1188,6 +1237,12 @@ static const struct xpcs_compat synopsys_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
.num_interfaces = ARRAY_SIZE(xpcs_xlgmii_interfaces),
.an_mode = DW_AN_C73,
},
+ [DW_XPCS_10GBASER] = {
+ .supported = xpcs_10gbaser_features,
+ .interface = xpcs_10gbaser_interfaces,
+ .num_interfaces = ARRAY_SIZE(xpcs_10gbaser_interfaces),
+ .an_mode = DW_10GBASER,
+ },
[DW_XPCS_SGMII] = {
.supported = xpcs_sgmii_features,
.interface = xpcs_sgmii_interfaces,
@@ -1290,6 +1345,9 @@ struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev,
}
xpcs->pcs.ops = &xpcs_phylink_ops;
+ if (compat->an_mode == DW_10GBASER)
+ return xpcs;
+
xpcs->pcs.poll = true;
ret = xpcs_soft_reset(xpcs, compat);
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index d2da1e0b4a92..61df0c717a0e 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -18,6 +18,7 @@
#define DW_AN_C37_SGMII 2
#define DW_2500BASEX 3
#define DW_AN_C37_1000BASEX 4
+#define DW_10GBASER 5
struct xpcs_id;
--
2.27.0
next prev parent reply other threads:[~2023-04-19 8:29 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-19 8:27 [PATCH net-next v3 0/8] TXGBE PHYLINK support Jiawen Wu
2023-04-19 8:27 ` [PATCH net-next v3 1/8] net: txgbe: Add software nodes to support phylink Jiawen Wu
2023-04-19 20:53 ` Andrew Lunn
2023-04-19 8:27 ` [PATCH net-next v3 2/8] i2c: designware: Add driver support for Wangxun 10Gb NIC Jiawen Wu
2023-04-19 14:36 ` Jarkko Nikula
2023-04-20 10:49 ` Jiawen Wu
2023-04-19 20:58 ` Andrew Lunn
2023-04-20 10:29 ` Jiawen Wu
2023-04-20 13:22 ` Andrew Lunn
2023-04-21 2:20 ` Jiawen Wu
2023-04-21 12:15 ` Andrew Lunn
2023-04-21 6:52 ` Jarkko Nikula
2023-04-21 12:22 ` Andrew Lunn
2023-04-21 13:00 ` Jarkko Nikula
2023-04-19 8:27 ` [PATCH net-next v3 3/8] net: txgbe: Register I2C platform device Jiawen Wu
2023-04-19 8:27 ` [PATCH net-next v3 4/8] net: txgbe: Add SFP module identify Jiawen Wu
2023-04-19 13:55 ` Vladimir Oltean
2023-04-19 8:27 ` [PATCH net-next v3 5/8] net: txgbe: Support GPIO to SFP socket Jiawen Wu
2023-04-19 8:27 ` Jiawen Wu [this message]
2023-04-19 13:19 ` [PATCH net-next v3 6/8] net: pcs: Add 10GBASE-R mode for Synopsys Designware XPCS Vladimir Oltean
2023-04-20 1:56 ` Jiawen Wu
2023-04-20 8:03 ` Vladimir Oltean
2023-04-20 8:38 ` Jiawen Wu
2023-04-20 8:52 ` Vladimir Oltean
2023-04-20 9:32 ` Jiawen Wu
2023-04-19 8:27 ` [PATCH net-next v3 7/8] net: txgbe: Implement phylink pcs Jiawen Wu
2023-04-19 8:27 ` [PATCH net-next v3 8/8] net: txgbe: Support phylink MAC layer Jiawen Wu
2023-04-19 13:39 ` [PATCH net-next v3 0/8] TXGBE PHYLINK support Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230419082739.295180-7-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=Jose.Abreu@synopsys.com \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mengyuanlou@net-swift.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox