From: Lee Jones <lee@kernel.org>
To: Benjamin Bara <bbara93@gmail.com>
Cc: Wolfram Sang <wsa@kernel.org>,
rafael.j.wysocki@intel.com, dmitry.osipenko@collabora.com,
peterz@infradead.org, jonathanh@nvidia.com,
richard.leitner@linux.dev, treding@nvidia.com,
linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-tegra@vger.kernel.org,
Benjamin Bara <benjamin.bara@skidata.com>
Subject: Re: [PATCH v5 6/6] mfd: tps6586x: register restart handler
Date: Thu, 20 Apr 2023 15:04:06 +0100 [thread overview]
Message-ID: <20230420140406.GH996918@google.com> (raw)
In-Reply-To: <20230327-tegra-pmic-reboot-v5-6-ab090e03284d@skidata.com>
On Tue, 18 Apr 2023, Benjamin Bara wrote:
> From: Benjamin Bara <benjamin.bara@skidata.com>
>
> There are a couple of boards which use a tps6586x as
> "ti,system-power-controller", e.g. the tegra20-tamonten.dtsi.
> For these, the only registered restart handler is the warm reboot via
> tegra's PMC. As the bootloader of the tegra20 requires the VDE, it must
> be ensured that VDE is enabled (which is the case after a cold reboot).
> For the "normal reboot", this is basically the case since 8f0c714ad9be.
> However, this workaround is not executed in case of an emergency restart.
> In case of an emergency restart, the system now simply hangs in the
> bootloader, as VDE is not enabled (because it is not used).
>
> The TPS658629-Q1 (unfortunately the only TPS6586x with public data sheet)
> provides a SOFT RST bit in the SUPPLYENE reg to request a (cold) reboot,
> which takes at least 10ms (as the data sheet states).
> This avoids the hang-up.
>
> Tested on a TPS658640.
>
> Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
> ---
> drivers/mfd/tps6586x.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
> index 226e856e34e0..f7665b368071 100644
> --- a/drivers/mfd/tps6586x.c
> +++ b/drivers/mfd/tps6586x.c
> @@ -30,6 +30,7 @@
> #include <linux/mfd/tps6586x.h>
>
> #define TPS6586X_SUPPLYENE 0x14
> +#define SOFT_RST_BIT BIT(0)
> #define EXITSLREQ_BIT BIT(1)
> #define SLEEP_MODE_BIT BIT(3)
>
> @@ -475,6 +476,24 @@ static int tps6586x_power_off_handler(struct sys_off_data *data)
> return notifier_from_errno(-ETIME);
> }
>
> +static int tps6586x_restart_handler(struct sys_off_data *data)
> +{
> + int ret;
> +
> + /* tps6586x only provides a hard/cold reboot, skip others. */
TPS6586x
> + if (data->mode != REBOOT_UNDEFINED && data->mode != REBOOT_COLD &&
> + data->mode != REBOOT_HARD)
> + return NOTIFY_DONE;
> +
> + /* bring pmic into HARD REBOOT state. this takes at least 10ms. */
Same as the other patch.
> + ret = tps6586x_set_bits(data->dev, TPS6586X_SUPPLYENE, SOFT_RST_BIT);
> + if (ret)
> + return notifier_from_errno(ret);
> +
> + mdelay(20);
Why 20 here and 50 in the other patch?
> + return notifier_from_errno(-ETIME);
> +}
> +
> static void tps6586x_print_version(struct i2c_client *client, int version)
> {
> const char *name;
> @@ -575,6 +594,13 @@ static int tps6586x_i2c_probe(struct i2c_client *client)
> dev_err(&client->dev, "register power off handler failed: %d\n", ret);
> goto err_add_devs;
> }
> +
> + ret = devm_register_restart_handler(&client->dev, &tps6586x_restart_handler,
> + NULL);
> + if (ret) {
> + dev_err(&client->dev, "register restart handler failed: %d\n", ret);
> + goto err_add_devs;
> + }
> }
>
> return 0;
>
> --
> 2.34.1
>
--
Lee Jones [李琼斯]
next prev parent reply other threads:[~2023-04-20 14:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-18 11:09 [PATCH v5 0/6] mfd: tps6586x: register restart handler Benjamin Bara
2023-04-18 11:10 ` [PATCH v5 1/6] kernel/reboot: emergency_restart: set correct system_state Benjamin Bara
2023-04-18 11:10 ` [PATCH v5 2/6] i2c: core: run atomic i2c xfer when !preemptible Benjamin Bara
2023-04-18 11:10 ` [PATCH v5 3/6] kernel/reboot: add device to sys_off_handler Benjamin Bara
2023-04-18 11:10 ` [PATCH v5 4/6] kernel/reboot: sys_off_notify: always return NOTIFY_DONE Benjamin Bara
2023-04-18 11:10 ` [PATCH v5 5/6] mfd: tps6586x: use devm-based power off handler Benjamin Bara
2023-04-20 14:02 ` Lee Jones
2023-04-18 11:10 ` [PATCH v5 6/6] mfd: tps6586x: register restart handler Benjamin Bara
2023-04-20 14:04 ` Lee Jones [this message]
2023-04-20 14:32 ` Benjamin Bara
2023-04-21 7:25 ` Lee Jones
2023-04-21 7:32 ` Benjamin Bara
2023-04-21 7:42 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230420140406.GH996918@google.com \
--to=lee@kernel.org \
--cc=bbara93@gmail.com \
--cc=benjamin.bara@skidata.com \
--cc=dmitry.osipenko@collabora.com \
--cc=jonathanh@nvidia.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=rafael.j.wysocki@intel.com \
--cc=richard.leitner@linux.dev \
--cc=treding@nvidia.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).