[PATCH v2 5/8] I2C: ali15x3: Do PCI error checks on own line

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.

No functional changes intended.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/i2c/busses/i2c-ali15x3.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index cc58feacd082..0231c5be6354 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -165,14 +165,15 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
 	}
 
 	if(force_addr) {
+		int ret;
+
 		dev_info(&ALI15X3_dev->dev, "forcing ISA address 0x%04X\n",
 			ali15x3_smba);
-		if (PCIBIOS_SUCCESSFUL != pci_write_config_word(ALI15X3_dev,
-								SMBBA,
-								ali15x3_smba))
+		ret = pci_write_config_word(ALI15X3_dev, SMBBA, ali15x3_smba);
+		if (ret != PCIBIOS_SUCCESSFUL)
 			goto error;
-		if (PCIBIOS_SUCCESSFUL != pci_read_config_word(ALI15X3_dev,
-								SMBBA, &a))
+		ret = pci_read_config_word(ALI15X3_dev, SMBBA, &a);
+		if (ret != PCIBIOS_SUCCESSFUL)
 			goto error;
 		if ((a & ~(ALI15X3_SMB_IOSIZE - 1)) != ali15x3_smba) {
 			/* make sure it works */
-- 
2.30.2