public inbox for linux-i2c@vger.kernel.org
 help / color / mirror / Atom feed
From: Marek Szyprowski <m.szyprowski@samsung.com>
To: linux-samsung-soc@vger.kernel.org, linux-i2c@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Andi Shyti <andi.shyti@kernel.org>, Wolfram Sang <wsa@kernel.org>,
	Chanho Park <chanho61.park@samsung.com>
Subject: [PATCH v4 2/3] i2c: s3c24xx: fix transferring more than one message in polling mode
Date: Wed,  8 Nov 2023 17:43:53 +0100	[thread overview]
Message-ID: <20231108164354.712406-3-m.szyprowski@samsung.com> (raw)
In-Reply-To: <20231108164354.712406-1-m.szyprowski@samsung.com>

To properly handle ACK on the bus when transferring more than one
message in polling mode, move the polling handling loop from
s3c24xx_i2c_message_start() to s3c24xx_i2c_doxfer(). This way
i2c_s3c_irq_nextbyte() is always executed till the end, properly
acknowledging the IRQ bits and no recursive calls to
i2c_s3c_irq_nextbyte() are made.

While touching this, also fix finishing transfers in polling mode by
using common code path and always waiting for the bus to become idle
and disabled.

Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
---
 drivers/i2c/busses/i2c-s3c2410.c | 27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index bf9a5670ef33..c0fe96a4f2c4 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -279,16 +279,6 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
 
 	stat |= S3C2410_IICSTAT_START;
 	writel(stat, i2c->regs + S3C2410_IICSTAT);
-
-	if (i2c->quirks & QUIRK_POLL) {
-		while ((i2c->msg_num != 0) && is_ack(i2c)) {
-			i2c_s3c_irq_nextbyte(i2c, stat);
-			stat = readl(i2c->regs + S3C2410_IICSTAT);
-
-			if (stat & S3C2410_IICSTAT_ARBITR)
-				dev_err(i2c->dev, "deal with arbitration loss\n");
-		}
-	}
 }
 
 static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
@@ -694,7 +684,7 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
 static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 			      struct i2c_msg *msgs, int num)
 {
-	unsigned long timeout;
+	unsigned long timeout = 0;
 	int ret;
 
 	ret = s3c24xx_i2c_set_master(i2c);
@@ -714,16 +704,19 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 	s3c24xx_i2c_message_start(i2c, msgs);
 
 	if (i2c->quirks & QUIRK_POLL) {
-		ret = i2c->msg_idx;
+		while ((i2c->msg_num != 0) && is_ack(i2c)) {
+			unsigned long stat = readl(i2c->regs + S3C2410_IICSTAT);
 
-		if (ret != num)
-			dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
+			i2c_s3c_irq_nextbyte(i2c, stat);
 
-		goto out;
+			stat = readl(i2c->regs + S3C2410_IICSTAT);
+			if (stat & S3C2410_IICSTAT_ARBITR)
+				dev_err(i2c->dev, "deal with arbitration loss\n");
+		}
+	} else {
+		timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
 	}
 
-	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
-
 	ret = i2c->msg_idx;
 
 	/*
-- 
2.34.1


  parent reply	other threads:[~2023-11-08 16:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20231108164403eucas1p17da17aee0bae5723e78e6a2e2b76c828@eucas1p1.samsung.com>
2023-11-08 16:43 ` [PATCH v4 0/3] Add atomic transfers to s3c24xx i2c driver Marek Szyprowski
2023-11-08 16:43   ` [PATCH v4 1/3] i2c: s3c24xx: fix read transfers in polling mode Marek Szyprowski
2023-11-08 16:43   ` Marek Szyprowski [this message]
2023-11-08 16:43   ` [PATCH v4 3/3] i2c: s3c24xx: add support for atomic transfers Marek Szyprowski
2023-12-19 17:00   ` [PATCH v4 0/3] Add atomic transfers to s3c24xx i2c driver Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231108164354.712406-3-m.szyprowski@samsung.com \
    --to=m.szyprowski@samsung.com \
    --cc=alim.akhtar@samsung.com \
    --cc=andi.shyti@kernel.org \
    --cc=chanho61.park@samsung.com \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox