[PATCH v3 00/25] i2c: designware: code consolidation & cleanups

[PATCH v3 00/25] i2c: designware: code consolidation & cleanups

[Andy Shevchenko]

The series now consists the following groups of patches:
- fixing cleanup order in error path and remove (patches 1-5)
- refactoring i2c_dw_*_lock_support() (patches 6-7)
- refactoring module alias and device ID tables (patches 8-11)
- unifying firmware parsing and configuring code (patches 12-16)
- miscellaneous cleanups (patches 17-18,22-25)
- consolidating PM ops (patch 19)
- using device_set_node() for all drivers (patches 20-21)

The "Consolidate PM ops" might be considered as rft, however I don't think
we have any hardware where the behaviour will be changed, anyways, good
to test.

Changelog v3:
- doubled the size of the series
- fixed compilation error (LKP)
- added tags (Andi)

v2: https://lore.kernel.org/r/20231109182823.3531846-1-andriy.shevchenko@linux.intel.com

Changelog v2:
- reworked the series to make it less twisted (Jarkko, Andi)
- added tags to the patches that have been rebased (Andi, Mario, Jarkko)
- introduced a few new changes (PM ops, export namespace)

v1: https://lore.kernel.org/r/20230725143023.86325-1-andriy.shevchenko@linux.intel.com

Andy Shevchenko (25):
  i2c: designware: Delete adapter before disabling in
    i2c_dw_pci_remove()
  i2c: designware: Fix PM calls order in dw_i2c_plat_probe()
  i2c: designware: Fix reset call order in dw_i2c_plat_probe()
  i2c: designware: Let PCI core to take care about interrupt vectors
  i2c: designware: Fix lock probe call order in dw_i2c_plat_probe()
  i2c: designware: Replace a while-loop by for-loop
  i2c: designware: Save pointer to semaphore callbacks instead of index
  i2c: designware: Add missing 'c' into PCI IDs variable name
  i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
  i2c: designware: Unify terminator in device ID tables
  i2c: designware: Always provide device ID tables
  i2c: designware: Drop return value from i2c_dw_acpi_configure()
  i2c: designware: Drop return value from dw_i2c_of_configure()
  i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()
  i2c: designware: Consolidate firmware parsing and configuring code
  i2c: designware: Unify the firmware type checks
  i2c: designware: Move exports to I2C_DW namespaces
  i2c: designware: Remove ->disable() callback
  i2c: designware: Consolidate PM ops
  i2c: designware: Uninline i2c_dw_probe()
  i2c: designware: Propagate firmware node
  i2c: designware: Use pci_get_drvdata()
  i2c: designware: Use temporary variable for struct device
  i2c: designware: Get rid of redundant 'else'
  i2c: designware: Fix spelling and other issues in the comments

 drivers/i2c/busses/i2c-designware-amdpsp.c  |  10 +-
 drivers/i2c/busses/i2c-designware-common.c  | 166 +++++++++-
 drivers/i2c/busses/i2c-designware-core.h    |  47 +--
 drivers/i2c/busses/i2c-designware-master.c  |  19 +-
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 118 ++-----
 drivers/i2c/busses/i2c-designware-platdrv.c | 337 +++++++-------------
 drivers/i2c/busses/i2c-designware-slave.c   |  12 +-
 7 files changed, 338 insertions(+), 371 deletions(-)

-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 01/25] i2c: designware: Delete adapter before disabling in i2c_dw_pci_remove()

[Andy Shevchenko]

Make i2c_dw_pci_remove() to be aligned with dw_i2c_plat_remove() on
the sequence of the ceasing I²C operations.

Fixes: 18dbdda89f5c ("i2c-designware: Add runtime power management support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 61d7a27aa070..35d35d7c8e23 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -354,11 +354,13 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 {
 	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
 
+	i2c_del_adapter(&dev->adapter);
+
 	dev->disable(dev);
+
 	pm_runtime_forbid(&pdev->dev);
 	pm_runtime_get_noresume(&pdev->dev);
 
-	i2c_del_adapter(&dev->adapter);
 	devm_free_irq(&pdev->dev, dev->irq, dev);
 	pci_free_irq_vectors(pdev);
 }
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 02/25] i2c: designware: Fix PM calls order in dw_i2c_plat_probe()

[Andy Shevchenko]

We should not mix managed calls with non-managed. This will break
the calls order at the error path and ->remove() stages. Fix this
by wrapping PM ops to become managed one.

Fixes: 36d48fb5766a ("i2c: designware-platdrv: enable RuntimePM before registering to the core")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 28 ++++++++++++---------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 855b698e99c0..8b0099e1bc26 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -177,14 +177,26 @@ static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
+static void dw_i2c_plat_pm_cleanup(void *data)
 {
+	struct dw_i2c_dev *dev = data;
+
 	pm_runtime_disable(dev->dev);
 
 	if (dev->shared_with_punit)
 		pm_runtime_put_noidle(dev->dev);
 }
 
+static int dw_i2c_plat_pm_setup(struct dw_i2c_dev *dev)
+{
+	if (dev->shared_with_punit)
+		pm_runtime_get_noresume(dev->dev);
+
+	pm_runtime_enable(dev->dev);
+
+	return devm_add_action_or_reset(dev->dev, dw_i2c_plat_pm_cleanup, dev);
+}
+
 static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev->dev);
@@ -381,19 +393,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
 
-	if (dev->shared_with_punit)
-		pm_runtime_get_noresume(&pdev->dev);
-
-	pm_runtime_enable(&pdev->dev);
-
-	ret = i2c_dw_probe(dev);
+	ret = dw_i2c_plat_pm_setup(dev);
 	if (ret)
-		goto exit_probe;
+		goto exit_reset;
 
-	return ret;
+	return i2c_dw_probe(dev);
 
-exit_probe:
-	dw_i2c_plat_pm_cleanup(dev);
 exit_reset:
 	reset_control_assert(dev->rst);
 	return ret;
@@ -411,7 +416,6 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
-	dw_i2c_plat_pm_cleanup(dev);
 
 	i2c_dw_remove_lock_support(dev);
 
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 03/25] i2c: designware: Fix reset call order in dw_i2c_plat_probe()

[Andy Shevchenko]

We should not mix managed calls with non-managed. This will break
the calls order at the error path and ->remove() stages. Fix this
by wrapping reset control to become managed one.

With that start checking the rerurn code from reset_control_deassert()
as it may fail and calling assertion in that scenario is not always
a good idea.

Fixes: ab809fd81fde ("i2c: designware: add reset interface")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 56 ++++++++++++---------
 1 file changed, 33 insertions(+), 23 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 8b0099e1bc26..648fb84e574d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -285,6 +285,28 @@ static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
 		i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev);
 }
 
+static void dw_i2c_plat_assert_reset(void *data)
+{
+	struct dw_i2c_dev *dev = data;
+
+	reset_control_assert(dev->rst);
+}
+
+static int dw_i2c_plat_get_reset(struct dw_i2c_dev *dev)
+{
+	int ret;
+
+	dev->rst = devm_reset_control_get_optional_exclusive(dev->dev, NULL);
+	if (IS_ERR(dev->rst))
+		return PTR_ERR(dev->rst);
+
+	ret = reset_control_deassert(dev->rst);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev->dev, dw_i2c_plat_assert_reset, dev);
+}
+
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct i2c_adapter *adap;
@@ -312,11 +334,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(dev->rst))
-		return PTR_ERR(dev->rst);
-
-	reset_control_deassert(dev->rst);
+	ret = dw_i2c_plat_get_reset(dev);
+	if (ret)
+		return ret;
 
 	t = &dev->timings;
 	i2c_parse_fw_timings(&pdev->dev, t, false);
@@ -331,30 +351,26 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	ret = i2c_dw_validate_speed(dev);
 	if (ret)
-		goto exit_reset;
+		return ret;
 
 	ret = i2c_dw_probe_lock_support(dev);
 	if (ret)
-		goto exit_reset;
+		return ret;
 
 	i2c_dw_configure(dev);
 
 	/* Optional interface clock */
 	dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
-	if (IS_ERR(dev->pclk)) {
-		ret = PTR_ERR(dev->pclk);
-		goto exit_reset;
-	}
+	if (IS_ERR(dev->pclk))
+		return PTR_ERR(dev->pclk);
 
 	dev->clk = devm_clk_get_optional(&pdev->dev, NULL);
-	if (IS_ERR(dev->clk)) {
-		ret = PTR_ERR(dev->clk);
-		goto exit_reset;
-	}
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
 
 	ret = i2c_dw_prepare_clk(dev, true);
 	if (ret)
-		goto exit_reset;
+		return ret;
 
 	if (dev->clk) {
 		u64 clk_khz;
@@ -395,13 +411,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	ret = dw_i2c_plat_pm_setup(dev);
 	if (ret)
-		goto exit_reset;
+		return ret;
 
 	return i2c_dw_probe(dev);
-
-exit_reset:
-	reset_control_assert(dev->rst);
-	return ret;
 }
 
 static void dw_i2c_plat_remove(struct platform_device *pdev)
@@ -418,8 +430,6 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
 	pm_runtime_put_sync(&pdev->dev);
 
 	i2c_dw_remove_lock_support(dev);
-
-	reset_control_assert(dev->rst);
 }
 
 static int dw_i2c_plat_prepare(struct device *dev)
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 04/25] i2c: designware: Let PCI core to take care about interrupt vectors

[Andy Shevchenko]

PCI core, after pcim_enable_device(), takes care about the allocated
IRQ vectors, no need to do it explicitly and break the cleaning up
order.

Fixes: 21aa3983d619 ("i2c: designware-pci: Switch over to MSI interrupts")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c | 15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 35d35d7c8e23..175aa18f1a04 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -295,10 +295,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 
 	if (controller->setup) {
 		r = controller->setup(pdev, controller);
-		if (r) {
-			pci_free_irq_vectors(pdev);
+		if (r)
 			return r;
-		}
 	}
 
 	i2c_dw_adjust_bus_speed(dev);
@@ -307,10 +305,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 		i2c_dw_acpi_configure(&pdev->dev);
 
 	r = i2c_dw_validate_speed(dev);
-	if (r) {
-		pci_free_irq_vectors(pdev);
+	if (r)
 		return r;
-	}
 
 	i2c_dw_configure(dev);
 
@@ -330,10 +326,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	adap->nr = controller->bus_num;
 
 	r = i2c_dw_probe(dev);
-	if (r) {
-		pci_free_irq_vectors(pdev);
+	if (r)
 		return r;
-	}
 
 	if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
 		dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, &dgpu_node);
@@ -360,9 +354,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 
 	pm_runtime_forbid(&pdev->dev);
 	pm_runtime_get_noresume(&pdev->dev);
-
-	devm_free_irq(&pdev->dev, dev->irq, dev);
-	pci_free_irq_vectors(pdev);
 }
 
 static const struct pci_device_id i2_designware_pci_ids[] = {
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 05/25] i2c: designware: Fix lock probe call order in dw_i2c_plat_probe()

[Andy Shevchenko]

We should not mix managed calls with non-managed. This will break
the calls order at the error path and ->remove() stages. Fix this
by wrapping lock probe to become managed one.

Fixes: 78d5e9e299e3 ("i2c: designware: Add AMD PSP I2C bus support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 24 ++++++++++-----------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 648fb84e574d..63cc3cdca2c7 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -243,6 +243,17 @@ static const struct i2c_dw_semaphore_callbacks i2c_dw_semaphore_cb_table[] = {
 	{}
 };
 
+static void i2c_dw_remove_lock_support(void *data)
+{
+	struct dw_i2c_dev *dev = data;
+
+	if (dev->semaphore_idx < 0)
+		return;
+
+	if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove)
+		i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev);
+}
+
 static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 {
 	const struct i2c_dw_semaphore_callbacks *ptr;
@@ -273,16 +284,7 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 		break;
 	}
 
-	return 0;
-}
-
-static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
-{
-	if (dev->semaphore_idx < 0)
-		return;
-
-	if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove)
-		i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev);
+	return devm_add_action_or_reset(dev->dev, i2c_dw_remove_lock_support, dev);
 }
 
 static void dw_i2c_plat_assert_reset(void *data)
@@ -428,8 +430,6 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
-
-	i2c_dw_remove_lock_support(dev);
 }
 
 static int dw_i2c_plat_prepare(struct device *dev)
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 06/25] i2c: designware: Replace a while-loop by for-loop

[Andy Shevchenko]

Replace a while-loop by for-loop in i2c_dw_probe_lock_support() to
save a few lines of code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 63cc3cdca2c7..cb954f11540e 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -260,11 +260,9 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 	int i = 0;
 	int ret;
 
-	ptr = i2c_dw_semaphore_cb_table;
-
 	dev->semaphore_idx = -1;
 
-	while (ptr->probe) {
+	for (ptr = i2c_dw_semaphore_cb_table; ptr->probe; ptr++) {
 		ret = ptr->probe(dev);
 		if (ret) {
 			/*
@@ -276,7 +274,6 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 				return ret;
 
 			i++;
-			ptr++;
 			continue;
 		}
 
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 07/25] i2c: designware: Save pointer to semaphore callbacks instead of index

[Andy Shevchenko]

Instead of saving index and do an additional level of referencing,
save just a pointer to the semaphore callbacks directly. It makes
code cleaner.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-core.h    |  4 +++-
 drivers/i2c/busses/i2c-designware-platdrv.c | 12 ++++--------
 2 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index a7f6f3eafad7..f8dd87cb0ae9 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -187,6 +187,8 @@ struct clk;
 struct device;
 struct reset_control;
 
+struct i2c_dw_semaphore_callbacks;
+
 /**
  * struct dw_i2c_dev - private i2c-designware data
  * @dev: driver model device node
@@ -291,7 +293,7 @@ struct dw_i2c_dev {
 	u16			hs_lcnt;
 	int			(*acquire_lock)(void);
 	void			(*release_lock)(void);
-	int			semaphore_idx;
+	const struct i2c_dw_semaphore_callbacks *semaphore_cb;
 	bool			shared_with_punit;
 	void			(*disable)(struct dw_i2c_dev *dev);
 	int			(*init)(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index cb954f11540e..4b5e58e1ce5b 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -247,21 +247,18 @@ static void i2c_dw_remove_lock_support(void *data)
 {
 	struct dw_i2c_dev *dev = data;
 
-	if (dev->semaphore_idx < 0)
+	if (!dev->semaphore_cb)
 		return;
 
-	if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove)
-		i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev);
+	if (dev->semaphore_cb->remove)
+		dev->semaphore_cb->remove(dev);
 }
 
 static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 {
 	const struct i2c_dw_semaphore_callbacks *ptr;
-	int i = 0;
 	int ret;
 
-	dev->semaphore_idx = -1;
-
 	for (ptr = i2c_dw_semaphore_cb_table; ptr->probe; ptr++) {
 		ret = ptr->probe(dev);
 		if (ret) {
@@ -273,11 +270,10 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 			if (ret != -ENODEV)
 				return ret;
 
-			i++;
 			continue;
 		}
 
-		dev->semaphore_idx = i;
+		dev->semaphore_cb = ptr;
 		break;
 	}
 
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 08/25] i2c: designware: Add missing 'c' into PCI IDs variable name

[Andy Shevchenko]

Add missing 'c' into i2c_designware_pci_ids variable name.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 175aa18f1a04..d2ed4e77afb3 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -356,7 +356,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 	pm_runtime_get_noresume(&pdev->dev);
 }
 
-static const struct pci_device_id i2_designware_pci_ids[] = {
+static const struct pci_device_id i2c_designware_pci_ids[] = {
 	/* Medfield */
 	{ PCI_VDEVICE(INTEL, 0x0817), medfield },
 	{ PCI_VDEVICE(INTEL, 0x0818), medfield },
@@ -404,16 +404,16 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
 	{ PCI_VDEVICE(ATI,  0x7464), navi_amd },
 	{ 0,}
 };
-MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
+MODULE_DEVICE_TABLE(pci, i2c_designware_pci_ids);
 
 static struct pci_driver dw_i2c_driver = {
 	.name		= DRIVER_NAME,
-	.id_table	= i2_designware_pci_ids,
 	.probe		= i2c_dw_pci_probe,
 	.remove		= i2c_dw_pci_remove,
 	.driver         = {
 		.pm     = &i2c_dw_pm_ops,
 	},
+	.id_table	= i2c_designware_pci_ids,
 };
 module_pci_driver(dw_i2c_driver);
 
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 09/25] i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()

[Andy Shevchenko]

As Krzysztof Kozlowski pointed out the better is to use
MODULE_DEVICE_TABLE() as it will be consistent with the content
of the real ID table of the platform devices.

While at it, drop unneeded and unused module alias in PCI glue
driver as PCI already has its own ID table and automatic loading
should just work.

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 2 --
 drivers/i2c/busses/i2c-designware-platdrv.c | 8 ++++++--
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index d2ed4e77afb3..db642e0aa61f 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -417,8 +417,6 @@ static struct pci_driver dw_i2c_driver = {
 };
 module_pci_driver(dw_i2c_driver);
 
-/* Work with hotplug and coldplug */
-MODULE_ALIAS("i2c_designware-pci");
 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
 MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 4b5e58e1ce5b..5d8427ccc9b4 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -486,8 +486,11 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
 };
 
-/* Work with hotplug and coldplug */
-MODULE_ALIAS("platform:i2c_designware");
+static const struct platform_device_id dw_i2c_platform_ids[] = {
+	{ "i2c_designware" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, dw_i2c_platform_ids);
 
 static struct platform_driver dw_i2c_driver = {
 	.probe = dw_i2c_plat_probe,
@@ -498,6 +501,7 @@ static struct platform_driver dw_i2c_driver = {
 		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
 		.pm	= pm_ptr(&dw_i2c_dev_pm_ops),
 	},
+	.id_table = dw_i2c_platform_ids,
 };
 
 static int __init dw_i2c_init_driver(void)
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 10/25] i2c: designware: Unify terminator in device ID tables

[Andy Shevchenko]

Make the terminator entry look the same in all device ID tables.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 2 +-
 drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index db642e0aa61f..7f04dc33e6f7 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -402,7 +402,7 @@ static const struct pci_device_id i2c_designware_pci_ids[] = {
 	{ PCI_VDEVICE(ATI,  0x73c4), navi_amd },
 	{ PCI_VDEVICE(ATI,  0x7444), navi_amd },
 	{ PCI_VDEVICE(ATI,  0x7464), navi_amd },
-	{ 0,}
+	{}
 };
 MODULE_DEVICE_TABLE(pci, i2c_designware_pci_ids);
 
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5d8427ccc9b4..018c353a456a 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -57,7 +57,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "HISI02A2", 0 },
 	{ "HISI02A3", 0 },
 	{ "HYGO0010", ACCESS_INTR_MASK },
-	{ }
+	{}
 };
 MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
 #endif
@@ -153,7 +153,7 @@ static const struct of_device_id dw_i2c_of_match[] = {
 	{ .compatible = "snps,designware-i2c", },
 	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
 	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
-	{},
+	{}
 };
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #else
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 11/25] i2c: designware: Always provide device ID tables

[Andy Shevchenko]

There is no need to have ugly ifdeffery and additional macros
for the device ID tables. Always provide them. Since we touch
the ACPI table, make it sorted by ID.

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 62 ++++++++++-----------
 1 file changed, 30 insertions(+), 32 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 018c353a456a..15f19ec20b33 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -40,28 +40,6 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 	return clk_get_rate(dev->clk) / KILO;
 }
 
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id dw_i2c_acpi_match[] = {
-	{ "INT33C2", 0 },
-	{ "INT33C3", 0 },
-	{ "INT3432", 0 },
-	{ "INT3433", 0 },
-	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
-	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
-	{ "AMD0010", ACCESS_INTR_MASK },
-	{ "AMDI0010", ACCESS_INTR_MASK },
-	{ "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
-	{ "AMDI0510", 0 },
-	{ "APMC0D0F", 0 },
-	{ "HISI02A1", 0 },
-	{ "HISI02A2", 0 },
-	{ "HISI02A3", 0 },
-	{ "HYGO0010", ACCESS_INTR_MASK },
-	{}
-};
-MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
-#endif
-
 #ifdef CONFIG_OF
 #define BT1_I2C_CTL			0x100
 #define BT1_I2C_CTL_ADDR_MASK		GENMASK(7, 0)
@@ -148,14 +126,6 @@ static int dw_i2c_of_configure(struct platform_device *pdev)
 
 	return 0;
 }
-
-static const struct of_device_id dw_i2c_of_match[] = {
-	{ .compatible = "snps,designware-i2c", },
-	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
-	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
-	{}
-};
-MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #else
 static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 {
@@ -486,6 +456,34 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
 };
 
+static const struct of_device_id dw_i2c_of_match[] = {
+	{ .compatible = "snps,designware-i2c", },
+	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
+	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
+
+static const struct acpi_device_id dw_i2c_acpi_match[] = {
+	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
+	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
+	{ "AMD0010", ACCESS_INTR_MASK },
+	{ "AMDI0010", ACCESS_INTR_MASK },
+	{ "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
+	{ "AMDI0510", 0 },
+	{ "APMC0D0F", 0 },
+	{ "HISI02A1", 0 },
+	{ "HISI02A2", 0 },
+	{ "HISI02A3", 0 },
+	{ "HYGO0010", ACCESS_INTR_MASK },
+	{ "INT33C2", 0 },
+	{ "INT33C3", 0 },
+	{ "INT3432", 0 },
+	{ "INT3433", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
+
 static const struct platform_device_id dw_i2c_platform_ids[] = {
 	{ "i2c_designware" },
 	{}
@@ -497,8 +495,8 @@ static struct platform_driver dw_i2c_driver = {
 	.remove_new = dw_i2c_plat_remove,
 	.driver		= {
 		.name	= "i2c_designware",
-		.of_match_table = of_match_ptr(dw_i2c_of_match),
-		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
+		.of_match_table = dw_i2c_of_match,
+		.acpi_match_table = dw_i2c_acpi_match,
 		.pm	= pm_ptr(&dw_i2c_dev_pm_ops),
 	},
 	.id_table = dw_i2c_platform_ids,
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 12/25] i2c: designware: Drop return value from i2c_dw_acpi_configure()

[Andy Shevchenko]

i2c_dw_acpi_configure() is called without checking of the returned
value, hence just drop it by converting to void.

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-common.c | 4 +---
 drivers/i2c/busses/i2c-designware-core.h   | 4 ++--
 2 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index affcfb243f0f..8d2223d164e3 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -255,7 +255,7 @@ static void i2c_dw_acpi_params(struct device *device, char method[],
 	kfree(buf.pointer);
 }
 
-int i2c_dw_acpi_configure(struct device *device)
+void i2c_dw_acpi_configure(struct device *device)
 {
 	struct dw_i2c_dev *dev = dev_get_drvdata(device);
 	struct i2c_timings *t = &dev->timings;
@@ -285,8 +285,6 @@ int i2c_dw_acpi_configure(struct device *device)
 		dev->sda_hold_time = fs_ht;
 		break;
 	}
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure);
 
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index f8dd87cb0ae9..b7884f15e0e9 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -399,7 +399,7 @@ int i2c_dw_validate_speed(struct dw_i2c_dev *dev);
 void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev);
 
 #if IS_ENABLED(CONFIG_ACPI)
-int i2c_dw_acpi_configure(struct device *device);
+void i2c_dw_acpi_configure(struct device *device);
 #else
-static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; }
+static inline void i2c_dw_acpi_configure(struct device *device) { }
 #endif
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 13/25] i2c: designware: Drop return value from dw_i2c_of_configure()

[Andy Shevchenko]

dw_i2c_of_configure() is called without checking of the returned
value, hence just drop it by converting to void.

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 15f19ec20b33..7449f1b37ecf 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -110,7 +110,7 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static int dw_i2c_of_configure(struct platform_device *pdev)
+static void dw_i2c_of_configure(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
 
@@ -123,8 +123,6 @@ static int dw_i2c_of_configure(struct platform_device *pdev)
 	default:
 		break;
 	}
-
-	return 0;
 }
 #else
 static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
@@ -132,9 +130,8 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 	return -ENODEV;
 }
 
-static inline int dw_i2c_of_configure(struct platform_device *pdev)
+static inline void dw_i2c_of_configure(struct platform_device *pdev)
 {
-	return -ENODEV;
 }
 #endif
 
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 14/25] i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()

[Andy Shevchenko]

For the sake of consistency, rename dw_i2c_of_configure() and change
its parameter to be aligned with the i2c_dw_acpi_configure().

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 7449f1b37ecf..b8606b651feb 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -110,9 +110,10 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static void dw_i2c_of_configure(struct platform_device *pdev)
+static void i2c_dw_of_configure(struct device *device)
 {
-	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	struct platform_device *pdev = to_platform_device(device);
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
 
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_MSCC_OCELOT:
@@ -130,7 +131,7 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 	return -ENODEV;
 }
 
-static inline void dw_i2c_of_configure(struct platform_device *pdev)
+static inline void i2c_dw_of_configure(struct device *device)
 {
 }
 #endif
@@ -306,7 +307,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	i2c_dw_adjust_bus_speed(dev);
 
 	if (pdev->dev.of_node)
-		dw_i2c_of_configure(pdev);
+		i2c_dw_of_configure(&pdev->dev);
 
 	if (has_acpi_companion(&pdev->dev))
 		i2c_dw_acpi_configure(&pdev->dev);
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 15/25] i2c: designware: Consolidate firmware parsing and configuring code

[Andy Shevchenko]

We have the same code flows in the PCI and plaform drivers. Moreover,
the flow requires the common code to export a few functions. Instead,
consolidate that flow under new function called
i2c_dw_fw_parse_and_configure() and drop unneeded exports.

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-common.c  | 68 +++++++++++++++++++--
 drivers/i2c/busses/i2c-designware-core.h    |  9 +--
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 11 +---
 drivers/i2c/busses/i2c-designware-platdrv.c | 48 +--------------
 4 files changed, 66 insertions(+), 70 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 8d2223d164e3..a5cae814a9c2 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/swab.h>
@@ -188,7 +189,7 @@ static const u32 supported_speeds[] = {
 	I2C_MAX_STANDARD_MODE_FREQ,
 };
 
-int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
+static int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
 {
 	struct i2c_timings *t = &dev->timings;
 	unsigned int i;
@@ -208,7 +209,44 @@ int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
 
 	return -EINVAL;
 }
-EXPORT_SYMBOL_GPL(i2c_dw_validate_speed);
+
+#ifdef CONFIG_OF
+
+#include <linux/platform_device.h>
+
+#define MSCC_ICPU_CFG_TWI_DELAY		0x0
+#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE	BIT(0)
+#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER	0x4
+
+static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
+{
+	writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
+	       dev->ext + MSCC_ICPU_CFG_TWI_DELAY);
+
+	return 0;
+}
+
+static void i2c_dw_of_configure(struct device *device)
+{
+	struct platform_device *pdev = to_platform_device(device);
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
+
+	switch (dev->flags & MODEL_MASK) {
+	case MODEL_MSCC_OCELOT:
+		dev->ext = devm_platform_ioremap_resource(pdev, 1);
+		if (!IS_ERR(dev->ext))
+			dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
+		break;
+	default:
+		break;
+	}
+}
+
+#else	/* CONFIG_OF */
+
+static inline void i2c_dw_of_configure(struct device *device) { }
+
+#endif	/* CONFIG_OF */
 
 #ifdef CONFIG_ACPI
 
@@ -255,7 +293,7 @@ static void i2c_dw_acpi_params(struct device *device, char method[],
 	kfree(buf.pointer);
 }
 
-void i2c_dw_acpi_configure(struct device *device)
+static void i2c_dw_acpi_configure(struct device *device)
 {
 	struct dw_i2c_dev *dev = dev_get_drvdata(device);
 	struct i2c_timings *t = &dev->timings;
@@ -286,7 +324,6 @@ void i2c_dw_acpi_configure(struct device *device)
 		break;
 	}
 }
-EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure);
 
 static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
 {
@@ -308,11 +345,13 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
 
 #else	/* CONFIG_ACPI */
 
+static inline void i2c_dw_acpi_configure(struct device *device) { }
+
 static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; }
 
 #endif	/* CONFIG_ACPI */
 
-void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
+static void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
 {
 	u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev);
 	struct i2c_timings *t = &dev->timings;
@@ -328,7 +367,24 @@ void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
 	else
 		t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
 }
-EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed);
+
+int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev)
+{
+	struct i2c_timings *t = &dev->timings;
+	struct device *device = dev->dev;
+
+	i2c_parse_fw_timings(device, t, false);
+
+	i2c_dw_adjust_bus_speed(dev);
+
+	if (device->of_node)
+		i2c_dw_of_configure(device);
+	if (has_acpi_companion(device))
+		i2c_dw_acpi_configure(device);
+
+	return i2c_dw_validate_speed(dev);
+}
+EXPORT_SYMBOL_GPL(i2c_dw_fw_parse_and_configure);
 
 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 {
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index b7884f15e0e9..22477143bb98 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -395,11 +395,4 @@ int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev);
 int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev);
 #endif
 
-int i2c_dw_validate_speed(struct dw_i2c_dev *dev);
-void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev);
-
-#if IS_ENABLED(CONFIG_ACPI)
-void i2c_dw_acpi_configure(struct device *device);
-#else
-static inline void i2c_dw_acpi_configure(struct device *device) { }
-#endif
+int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 7f04dc33e6f7..1d1b0c3cc079 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -253,7 +253,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	int r;
 	struct dw_pci_controller *controller;
 	struct dw_scl_sda_cfg *cfg;
-	struct i2c_timings *t;
 
 	if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers))
 		return dev_err_probe(&pdev->dev, -EINVAL,
@@ -288,9 +287,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	dev->irq = pci_irq_vector(pdev, 0);
 	dev->flags |= controller->flags;
 
-	t = &dev->timings;
-	i2c_parse_fw_timings(&pdev->dev, t, false);
-
 	pci_set_drvdata(pdev, dev);
 
 	if (controller->setup) {
@@ -299,12 +295,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 			return r;
 	}
 
-	i2c_dw_adjust_bus_speed(dev);
-
-	if (has_acpi_companion(&pdev->dev))
-		i2c_dw_acpi_configure(&pdev->dev);
-
-	r = i2c_dw_validate_speed(dev);
+	r = i2c_dw_fw_parse_and_configure(dev);
 	if (r)
 		return r;
 
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index b8606b651feb..b275a1b19eec 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -21,7 +21,6 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
@@ -97,43 +96,11 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 	dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg);
 	return PTR_ERR_OR_ZERO(dev->map);
 }
-
-#define MSCC_ICPU_CFG_TWI_DELAY		0x0
-#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE	BIT(0)
-#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER	0x4
-
-static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
-{
-	writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
-	       dev->ext + MSCC_ICPU_CFG_TWI_DELAY);
-
-	return 0;
-}
-
-static void i2c_dw_of_configure(struct device *device)
-{
-	struct platform_device *pdev = to_platform_device(device);
-	struct dw_i2c_dev *dev = dev_get_drvdata(device);
-
-	switch (dev->flags & MODEL_MASK) {
-	case MODEL_MSCC_OCELOT:
-		dev->ext = devm_platform_ioremap_resource(pdev, 1);
-		if (!IS_ERR(dev->ext))
-			dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
-		break;
-	default:
-		break;
-	}
-}
 #else
 static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 {
 	return -ENODEV;
 }
-
-static inline void i2c_dw_of_configure(struct device *device)
-{
-}
 #endif
 
 static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev)
@@ -274,7 +241,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct i2c_adapter *adap;
 	struct dw_i2c_dev *dev;
-	struct i2c_timings *t;
 	int irq, ret;
 
 	irq = platform_get_irq(pdev, 0);
@@ -301,18 +267,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	t = &dev->timings;
-	i2c_parse_fw_timings(&pdev->dev, t, false);
-
-	i2c_dw_adjust_bus_speed(dev);
-
-	if (pdev->dev.of_node)
-		i2c_dw_of_configure(&pdev->dev);
-
-	if (has_acpi_companion(&pdev->dev))
-		i2c_dw_acpi_configure(&pdev->dev);
-
-	ret = i2c_dw_validate_speed(dev);
+	ret = i2c_dw_fw_parse_and_configure(dev);
 	if (ret)
 		return ret;
 
@@ -336,6 +291,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		return ret;
 
 	if (dev->clk) {
+		struct i2c_timings *t = &dev->timings;
 		u64 clk_khz;
 
 		dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 16/25] i2c: designware: Unify the firmware type checks

[Andy Shevchenko]

Instead of asymmetrical checks for the firmware type use
the is_*_node() calls.

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-common.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index a5cae814a9c2..49d9d5f83071 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/swab.h>
 #include <linux/types.h>
@@ -372,14 +373,15 @@ int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev)
 {
 	struct i2c_timings *t = &dev->timings;
 	struct device *device = dev->dev;
+	struct fwnode_handle *fwnode = dev_fwnode(device);
 
 	i2c_parse_fw_timings(device, t, false);
 
 	i2c_dw_adjust_bus_speed(dev);
 
-	if (device->of_node)
+	if (is_of_node(fwnode))
 		i2c_dw_of_configure(device);
-	if (has_acpi_companion(device))
+	else if (is_acpi_node(fwnode))
 		i2c_dw_acpi_configure(device);
 
 	return i2c_dw_validate_speed(dev);
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 17/25] i2c: designware: Move exports to I2C_DW namespaces

[Andy Shevchenko]

Reduce scope of the I²C DesignWare driver exports to I2C_DW namespaces.
This will prevent abuse of the symbols and clean up global namespace.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-common.c  | 2 ++
 drivers/i2c/busses/i2c-designware-master.c  | 3 +++
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 2 ++
 drivers/i2c/busses/i2c-designware-platdrv.c | 2 ++
 drivers/i2c/busses/i2c-designware-slave.c   | 3 +++
 5 files changed, 12 insertions(+)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 49d9d5f83071..50cf4cbfeff3 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -28,6 +28,8 @@
 #include <linux/types.h>
 #include <linux/units.h>
 
+#define DEFAULT_SYMBOL_NAMESPACE	I2C_DW_COMMON
+
 #include "i2c-designware-core.h"
 
 static char *abort_sources[] = {
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 85dbd0eb5392..0b6576d7f811 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -22,6 +22,8 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#define DEFAULT_SYMBOL_NAMESPACE	I2C_DW
+
 #include "i2c-designware-core.h"
 
 #define AMD_TIMEOUT_MIN_US	25
@@ -1079,3 +1081,4 @@ EXPORT_SYMBOL_GPL(i2c_dw_probe_master);
 
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(I2C_DW_COMMON);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 1d1b0c3cc079..93a117d295d7 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -411,3 +411,5 @@ module_pci_driver(dw_i2c_driver);
 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
 MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(I2C_DW);
+MODULE_IMPORT_NS(I2C_DW_COMMON);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index b275a1b19eec..6b1a26afc278 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -471,3 +471,5 @@ module_exit(dw_i2c_exit_driver);
 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(I2C_DW);
+MODULE_IMPORT_NS(I2C_DW_COMMON);
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 2e079cf20bb5..70d183fa3bff 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -16,6 +16,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
+#define DEFAULT_SYMBOL_NAMESPACE	I2C_DW
+
 #include "i2c-designware-core.h"
 
 static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
@@ -279,3 +281,4 @@ EXPORT_SYMBOL_GPL(i2c_dw_probe_slave);
 MODULE_AUTHOR("Luis Oliveira <lolivei@synopsys.com>");
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus slave adapter");
 MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(I2C_DW_COMMON);
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 18/25] i2c: designware: Remove ->disable() callback

[Andy Shevchenko]

Commit 90312351fd1e ("i2c: designware: MASTER mode as separated driver")
introduced ->disable() callback but there is no real use for it. Both
i2c-designware-master.c and i2c-designware-slave.c set it to the same
i2c_dw_disable() and scope is inside the same kernel module.

That said, replace the callback by explicitly calling the i2c_dw_disable().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-core.h    | 2 --
 drivers/i2c/busses/i2c-designware-master.c  | 1 -
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 4 ++--
 drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++--
 drivers/i2c/busses/i2c-designware-slave.c   | 3 +--
 5 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 22477143bb98..52667d670363 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -238,7 +238,6 @@ struct i2c_dw_semaphore_callbacks;
  * @semaphore_idx: Index of table with semaphore type attached to the bus. It's
  *	-1 if there is no semaphore.
  * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
- * @disable: function to disable the controller
  * @init: function to initialize the I2C hardware
  * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing
  * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
@@ -295,7 +294,6 @@ struct dw_i2c_dev {
 	void			(*release_lock)(void);
 	const struct i2c_dw_semaphore_callbacks *semaphore_cb;
 	bool			shared_with_punit;
-	void			(*disable)(struct dw_i2c_dev *dev);
 	int			(*init)(struct dw_i2c_dev *dev);
 	int			(*set_sda_hold_time)(struct dw_i2c_dev *dev);
 	int			mode;
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 0b6576d7f811..bd3c8db521de 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -990,7 +990,6 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	init_completion(&dev->cmd_complete);
 
 	dev->init = i2c_dw_init_master;
-	dev->disable = i2c_dw_disable;
 
 	ret = i2c_dw_init_regmap(dev);
 	if (ret)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 93a117d295d7..6fd4a3d8764a 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -198,7 +198,7 @@ static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 
-	i_dev->disable(i_dev);
+	i2c_dw_disable(i_dev);
 	return 0;
 }
 
@@ -341,7 +341,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 
 	i2c_del_adapter(&dev->adapter);
 
-	dev->disable(dev);
+	i2c_dw_disable(dev);
 
 	pm_runtime_forbid(&pdev->dev);
 	pm_runtime_get_noresume(&pdev->dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 6b1a26afc278..9b249d27841d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -343,7 +343,7 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&dev->adapter);
 
-	dev->disable(dev);
+	i2c_dw_disable(dev);
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
@@ -367,7 +367,7 @@ static int dw_i2c_plat_runtime_suspend(struct device *dev)
 	if (i_dev->shared_with_punit)
 		return 0;
 
-	i_dev->disable(i_dev);
+	i2c_dw_disable(i_dev);
 	i2c_dw_prepare_clk(i_dev, false);
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 70d183fa3bff..5abd5ec41954 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -90,7 +90,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave)
 	struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
 
 	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-	dev->disable(dev);
+	i2c_dw_disable(dev);
 	synchronize_irq(dev->irq);
 	dev->slave = NULL;
 	pm_runtime_put(dev->dev);
@@ -237,7 +237,6 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 	int ret;
 
 	dev->init = i2c_dw_init_slave;
-	dev->disable = i2c_dw_disable;
 
 	ret = i2c_dw_init_regmap(dev);
 	if (ret)
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 19/25] i2c: designware: Consolidate PM ops

[Andy Shevchenko]

We have the same (*) PM ops in the PCI and plaform drivers.
Instead, consolidate that PM ops under exported variable and
deduplicate them.

*)
With the subtle ACPI and P-Unit behaviour differences in PCI case.
But this is not a problem as for ACPI we need to take care of the
P-Unit semaphore anyway and calling PM ops for ACPI makes sense as
it might provide specific operation regions in (however there are
no known devices on market that are using it with PCI enabled I2C).
Note, the clocks are not in use in the PCI case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-common.c  | 62 ++++++++++++++++++++
 drivers/i2c/busses/i2c-designware-core.h    |  5 +-
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 44 +-------------
 drivers/i2c/busses/i2c-designware-platdrv.c | 64 +--------------------
 4 files changed, 69 insertions(+), 106 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 50cf4cbfeff3..b7e653e939bd 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
@@ -712,5 +713,66 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 	i2c_dw_release_lock(dev);
 }
 
+static int i2c_dw_prepare(struct device *device)
+{
+	/*
+	 * If the ACPI companion device object is present for this device,
+	 * it may be accessed during suspend and resume of other devices via
+	 * I2C operation regions, so tell the PM core and middle layers to
+	 * avoid skipping system suspend/resume callbacks for it in that case.
+	 */
+	return !has_acpi_companion(device);
+}
+
+static int i2c_dw_runtime_suspend(struct device *device)
+{
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
+
+	if (dev->shared_with_punit)
+		return 0;
+
+	i2c_dw_disable(dev);
+	i2c_dw_prepare_clk(dev, false);
+
+	return 0;
+}
+
+static int i2c_dw_suspend(struct device *device)
+{
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
+
+	i2c_mark_adapter_suspended(&dev->adapter);
+
+	return i2c_dw_runtime_suspend(device);
+}
+
+static int i2c_dw_runtime_resume(struct device *device)
+{
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
+
+	if (!dev->shared_with_punit)
+		i2c_dw_prepare_clk(dev, true);
+
+	dev->init(dev);
+
+	return 0;
+}
+
+static int i2c_dw_resume(struct device *device)
+{
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
+
+	i2c_dw_runtime_resume(device);
+	i2c_mark_adapter_resumed(&dev->adapter);
+
+	return 0;
+}
+
+EXPORT_GPL_DEV_PM_OPS(i2c_dw_dev_pm_ops) = {
+	.prepare = pm_sleep_ptr(i2c_dw_prepare),
+	LATE_SYSTEM_SLEEP_PM_OPS(i2c_dw_suspend, i2c_dw_resume)
+	RUNTIME_PM_OPS(i2c_dw_runtime_suspend, i2c_dw_runtime_resume, NULL)
+};
+
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 52667d670363..f6ebf86dcc6f 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -15,6 +15,7 @@
 #include <linux/dev_printk.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
+#include <linux/pm.h>
 #include <linux/regmap.h>
 #include <linux/types.h>
 
@@ -337,7 +338,8 @@ int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
 int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
 int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev);
 u32 i2c_dw_func(struct i2c_adapter *adap);
-void i2c_dw_disable(struct dw_i2c_dev *dev);
+
+extern const struct dev_pm_ops i2c_dw_dev_pm_ops;
 
 static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
 {
@@ -352,6 +354,7 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
 }
 
 void __i2c_dw_disable(struct dw_i2c_dev *dev);
+void i2c_dw_disable(struct dw_i2c_dev *dev);
 
 extern void i2c_dw_configure_master(struct dw_i2c_dev *dev);
 extern int i2c_dw_probe_master(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 6fd4a3d8764a..c9eb01a16048 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/power_supply.h>
 #include <linux/sched.h>
@@ -194,47 +195,6 @@ static struct dw_pci_controller dw_pci_controllers[] = {
 	},
 };
 
-static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	i2c_dw_disable(i_dev);
-	return 0;
-}
-
-static int __maybe_unused i2c_dw_pci_suspend(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	i2c_mark_adapter_suspended(&i_dev->adapter);
-
-	return i2c_dw_pci_runtime_suspend(dev);
-}
-
-static int __maybe_unused i2c_dw_pci_runtime_resume(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	return i_dev->init(i_dev);
-}
-
-static int __maybe_unused i2c_dw_pci_resume(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-	int ret;
-
-	ret = i2c_dw_pci_runtime_resume(dev);
-
-	i2c_mark_adapter_resumed(&i_dev->adapter);
-
-	return ret;
-}
-
-static const struct dev_pm_ops i2c_dw_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume)
-	SET_RUNTIME_PM_OPS(i2c_dw_pci_runtime_suspend, i2c_dw_pci_runtime_resume, NULL)
-};
-
 static const struct property_entry dgpu_properties[] = {
 	/* USB-C doesn't power the system */
 	PROPERTY_ENTRY_U8("scope", POWER_SUPPLY_SCOPE_DEVICE),
@@ -402,7 +362,7 @@ static struct pci_driver dw_i2c_driver = {
 	.probe		= i2c_dw_pci_probe,
 	.remove		= i2c_dw_pci_remove,
 	.driver         = {
-		.pm     = &i2c_dw_pm_ops,
+		.pm	= pm_ptr(&i2c_dw_dev_pm_ops),
 	},
 	.id_table	= i2c_designware_pci_ids,
 };
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 9b249d27841d..d9a64006a3d6 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -29,7 +29,6 @@
 #include <linux/reset.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/suspend.h>
 #include <linux/units.h>
 
 #include "i2c-designware-core.h"
@@ -349,67 +348,6 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
 	pm_runtime_put_sync(&pdev->dev);
 }
 
-static int dw_i2c_plat_prepare(struct device *dev)
-{
-	/*
-	 * If the ACPI companion device object is present for this device, it
-	 * may be accessed during suspend and resume of other devices via I2C
-	 * operation regions, so tell the PM core and middle layers to avoid
-	 * skipping system suspend/resume callbacks for it in that case.
-	 */
-	return !has_acpi_companion(dev);
-}
-
-static int dw_i2c_plat_runtime_suspend(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	if (i_dev->shared_with_punit)
-		return 0;
-
-	i2c_dw_disable(i_dev);
-	i2c_dw_prepare_clk(i_dev, false);
-
-	return 0;
-}
-
-static int dw_i2c_plat_suspend(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	i2c_mark_adapter_suspended(&i_dev->adapter);
-
-	return dw_i2c_plat_runtime_suspend(dev);
-}
-
-static int dw_i2c_plat_runtime_resume(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	if (!i_dev->shared_with_punit)
-		i2c_dw_prepare_clk(i_dev, true);
-
-	i_dev->init(i_dev);
-
-	return 0;
-}
-
-static int dw_i2c_plat_resume(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	dw_i2c_plat_runtime_resume(dev);
-	i2c_mark_adapter_resumed(&i_dev->adapter);
-
-	return 0;
-}
-
-static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
-	.prepare = pm_sleep_ptr(dw_i2c_plat_prepare),
-	LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
-	RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
-};
-
 static const struct of_device_id dw_i2c_of_match[] = {
 	{ .compatible = "snps,designware-i2c", },
 	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
@@ -451,7 +389,7 @@ static struct platform_driver dw_i2c_driver = {
 		.name	= "i2c_designware",
 		.of_match_table = dw_i2c_of_match,
 		.acpi_match_table = dw_i2c_acpi_match,
-		.pm	= pm_ptr(&dw_i2c_dev_pm_ops),
+		.pm	= pm_ptr(&i2c_dw_dev_pm_ops),
 	},
 	.id_table = dw_i2c_platform_ids,
 };
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 20/25] i2c: designware: Uninline i2c_dw_probe()

[Andy Shevchenko]

Since i2c_dw_probe() is going to be extended, uninline it to reduce
the noise in the common header.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-common.c | 14 ++++++++++++++
 drivers/i2c/busses/i2c-designware-core.h   | 17 ++---------------
 2 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index b7e653e939bd..68d6a1c642a0 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -713,6 +713,20 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 	i2c_dw_release_lock(dev);
 }
 
+int i2c_dw_probe(struct dw_i2c_dev *dev)
+{
+	switch (dev->mode) {
+	case DW_IC_SLAVE:
+		return i2c_dw_probe_slave(dev);
+	case DW_IC_MASTER:
+		return i2c_dw_probe_master(dev);
+	default:
+		dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode);
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL_GPL(i2c_dw_probe);
+
 static int i2c_dw_prepare(struct device *device)
 {
 	/*
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index f6ebf86dcc6f..7479cb3a450d 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -10,9 +10,7 @@
  */
 
 #include <linux/bits.h>
-#include <linux/compiler_types.h>
 #include <linux/completion.h>
-#include <linux/dev_printk.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
 #include <linux/pm.h>
@@ -367,19 +365,6 @@ static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { }
 static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
 #endif
 
-static inline int i2c_dw_probe(struct dw_i2c_dev *dev)
-{
-	switch (dev->mode) {
-	case DW_IC_SLAVE:
-		return i2c_dw_probe_slave(dev);
-	case DW_IC_MASTER:
-		return i2c_dw_probe_master(dev);
-	default:
-		dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode);
-		return -EINVAL;
-	}
-}
-
 static inline void i2c_dw_configure(struct dw_i2c_dev *dev)
 {
 	if (i2c_detect_slave_mode(dev->dev))
@@ -388,6 +373,8 @@ static inline void i2c_dw_configure(struct dw_i2c_dev *dev)
 		i2c_dw_configure_master(dev);
 }
 
+int i2c_dw_probe(struct dw_i2c_dev *dev);
+
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
 int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev);
 #endif
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 21/25] i2c: designware: Propagate firmware node

[Andy Shevchenko]

Propagate firmware node by using a specific API call, i.e. device_set_node().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-common.c  | 2 ++
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 2 --
 drivers/i2c/busses/i2c-designware-platdrv.c | 3 ---
 3 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 68d6a1c642a0..45b5c910b8db 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -715,6 +715,8 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 
 int i2c_dw_probe(struct dw_i2c_dev *dev)
 {
+	device_set_node(&dev->adapter.dev, dev_fwnode(dev->dev));
+
 	switch (dev->mode) {
 	case DW_IC_SLAVE:
 		return i2c_dw_probe_slave(dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index c9eb01a16048..f9fbd41c188d 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -9,7 +9,6 @@
  * Copyright (C) 2009 Provigent Ltd.
  * Copyright (C) 2011, 2015, 2016 Intel Corporation.
  */
-#include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/errno.h>
@@ -273,7 +272,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	adap = &dev->adapter;
 	adap->owner = THIS_MODULE;
 	adap->class = 0;
-	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
 	adap->nr = controller->bus_num;
 
 	r = i2c_dw_probe(dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d9a64006a3d6..1b76f721bf81 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -8,7 +8,6 @@
  * Copyright (C) 2007 MontaVista Software Inc.
  * Copyright (C) 2009 Provigent Ltd.
  */
-#include <linux/acpi.h>
 #include <linux/clk-provider.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -305,8 +304,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	adap->owner = THIS_MODULE;
 	adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ?
 					I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
-	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
-	adap->dev.of_node = pdev->dev.of_node;
 	adap->nr = -1;
 
 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 22/25] i2c: designware: Use pci_get_drvdata()

[Andy Shevchenko]

Use the wrapper function for getting the driver data using pci_dev
instead of using dev_get_drvdata() with &pdev->dev, so we can directly
pass a struct pci_dev. This is a purely cosmetic change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index f9fbd41c188d..826c0c0a7c8d 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -102,7 +102,7 @@ static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev)
 
 static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
-	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
+	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
 
 	switch (pdev->device) {
 	case 0x0817:
@@ -152,7 +152,7 @@ static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev)
 
 static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
-	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
+	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
 
 	dev->flags |= MODEL_AMD_NAVI_GPU;
 	dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 23/25] i2c: designware: Use temporary variable for struct device

[Andy Shevchenko]

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 24 +++++++-------
 drivers/i2c/busses/i2c-designware-platdrv.c | 35 ++++++++++-----------
 2 files changed, 27 insertions(+), 32 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 826c0c0a7c8d..34002c5eb67c 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -207,6 +207,7 @@ static const struct software_node dgpu_node = {
 static int i2c_dw_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *id)
 {
+	struct device *device = &pdev->dev;
 	struct dw_i2c_dev *dev;
 	struct i2c_adapter *adap;
 	int r;
@@ -214,25 +215,22 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	struct dw_scl_sda_cfg *cfg;
 
 	if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers))
-		return dev_err_probe(&pdev->dev, -EINVAL,
-				     "Invalid driver data %ld\n",
+		return dev_err_probe(device, -EINVAL, "Invalid driver data %ld\n",
 				     id->driver_data);
 
 	controller = &dw_pci_controllers[id->driver_data];
 
 	r = pcim_enable_device(pdev);
 	if (r)
-		return dev_err_probe(&pdev->dev, r,
-				     "Failed to enable I2C PCI device\n");
+		return dev_err_probe(device, r, "Failed to enable I2C PCI device\n");
 
 	pci_set_master(pdev);
 
 	r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
 	if (r)
-		return dev_err_probe(&pdev->dev, r,
-				     "I/O memory remapping failed\n");
+		return dev_err_probe(device, r, "I/O memory remapping failed\n");
 
-	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	dev = devm_kzalloc(device, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
 
@@ -242,7 +240,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 
 	dev->get_clk_rate_khz = controller->get_clk_rate_khz;
 	dev->base = pcim_iomap_table(pdev)[0];
-	dev->dev = &pdev->dev;
+	dev->dev = device;
 	dev->irq = pci_irq_vector(pdev, 0);
 	dev->flags |= controller->flags;
 
@@ -281,14 +279,14 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
 		dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, &dgpu_node);
 		if (IS_ERR(dev->slave))
-			return dev_err_probe(dev->dev, PTR_ERR(dev->slave),
+			return dev_err_probe(device, PTR_ERR(dev->slave),
 					     "register UCSI failed\n");
 	}
 
-	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_put_autosuspend(&pdev->dev);
-	pm_runtime_allow(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(device, 1000);
+	pm_runtime_use_autosuspend(device);
+	pm_runtime_put_autosuspend(device);
+	pm_runtime_allow(device);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 1b76f721bf81..02dc1d1001f2 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -237,6 +237,7 @@ static int dw_i2c_plat_get_reset(struct dw_i2c_dev *dev)
 
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
+	struct device *device = &pdev->dev;
 	struct i2c_adapter *adap;
 	struct dw_i2c_dev *dev;
 	int irq, ret;
@@ -245,15 +246,15 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
+	dev = devm_kzalloc(device, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
 
-	dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
-	if (device_property_present(&pdev->dev, "wx,i2c-snps-model"))
+	dev->flags = (uintptr_t)device_get_match_data(device);
+	if (device_property_present(device, "wx,i2c-snps-model"))
 		dev->flags = MODEL_WANGXUN_SP;
 
-	dev->dev = &pdev->dev;
+	dev->dev = device;
 	dev->irq = irq;
 	platform_set_drvdata(pdev, dev);
 
@@ -276,11 +277,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	i2c_dw_configure(dev);
 
 	/* Optional interface clock */
-	dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
+	dev->pclk = devm_clk_get_optional(device, "pclk");
 	if (IS_ERR(dev->pclk))
 		return PTR_ERR(dev->pclk);
 
-	dev->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	dev->clk = devm_clk_get_optional(device, NULL);
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
 
@@ -306,23 +307,19 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 					I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
 	adap->nr = -1;
 
-	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
-		dev_pm_set_driver_flags(&pdev->dev,
-					DPM_FLAG_SMART_PREPARE);
-	} else {
-		dev_pm_set_driver_flags(&pdev->dev,
-					DPM_FLAG_SMART_PREPARE |
-					DPM_FLAG_SMART_SUSPEND);
-	}
+	if (dev->flags & ACCESS_NO_IRQ_SUSPEND)
+		dev_pm_set_driver_flags(device, DPM_FLAG_SMART_PREPARE);
+	else
+		dev_pm_set_driver_flags(device, DPM_FLAG_SMART_PREPARE | DPM_FLAG_SMART_SUSPEND);
 
-	device_enable_async_suspend(&pdev->dev);
+	device_enable_async_suspend(device);
 
 	/* The code below assumes runtime PM to be disabled. */
-	WARN_ON(pm_runtime_enabled(&pdev->dev));
+	WARN_ON(pm_runtime_enabled(device));
 
-	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(device, 1000);
+	pm_runtime_use_autosuspend(device);
+	pm_runtime_set_active(device);
 
 	ret = dw_i2c_plat_pm_setup(dev);
 	if (ret)
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 24/25] i2c: designware: Get rid of redundant 'else'

[Andy Shevchenko]

In the snippets like the following

	if (...)
		return / goto / break / continue ...;
	else
		...

the 'else' is redundant. Get rid of it.

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-common.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 45b5c910b8db..5e28f50e4ce6 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -639,10 +639,10 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 
 	if (abort_source & DW_IC_TX_ARB_LOST)
 		return -EAGAIN;
-	else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
+	if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
 		return -EINVAL; /* wrong msgs[] data */
-	else
-		return -EIO;
+
+	return -EIO;
 }
 
 int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev)
-- 
2.43.0.rc1.1.gbec44491f096

[PATCH v3 25/25] i2c: designware: Fix spelling and other issues in the comments

[Andy Shevchenko]

Fix spelling and other issues, such as kernel-doc reported about,
in the comments. While at it, fix some indentation issues as well.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-amdpsp.c  | 10 +++++-----
 drivers/i2c/busses/i2c-designware-common.c  |  8 +++++---
 drivers/i2c/busses/i2c-designware-core.h    | 10 +++++-----
 drivers/i2c/busses/i2c-designware-master.c  | 15 +++++++++------
 drivers/i2c/busses/i2c-designware-platdrv.c |  4 ++--
 drivers/i2c/busses/i2c-designware-slave.c   |  6 ++++--
 6 files changed, 30 insertions(+), 23 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-amdpsp.c b/drivers/i2c/busses/i2c-designware-amdpsp.c
index 63454b06e5da..8fbd2a10c31a 100644
--- a/drivers/i2c/busses/i2c-designware-amdpsp.c
+++ b/drivers/i2c/busses/i2c-designware-amdpsp.c
@@ -155,7 +155,7 @@ static void psp_release_i2c_bus_deferred(struct work_struct *work)
 
 	/*
 	 * If there is any pending transaction, cannot release the bus here.
-	 * psp_release_i2c_bus will take care of this later.
+	 * psp_release_i2c_bus() will take care of this later.
 	 */
 	if (psp_i2c_access_count)
 		goto cleanup;
@@ -210,12 +210,12 @@ static void psp_release_i2c_bus(void)
 {
 	mutex_lock(&psp_i2c_access_mutex);
 
-	/* Return early if mailbox was malfunctional */
+	/* Return early if mailbox was malfunctioned */
 	if (psp_i2c_mbox_fail)
 		goto cleanup;
 
 	/*
-	 * If we are last owner of PSP semaphore, need to release aribtration
+	 * If we are last owner of PSP semaphore, need to release arbitration
 	 * via mailbox.
 	 */
 	psp_i2c_access_count--;
@@ -235,9 +235,9 @@ static void psp_release_i2c_bus(void)
 
 /*
  * Locking methods are based on the default implementation from
- * drivers/i2c/i2c-core-base.c, but with psp acquire and release operations
+ * drivers/i2c/i2c-core-base.c, but with PSP acquire and release operations
  * added. With this in place we can ensure that i2c clients on the bus shared
- * with psp are able to lock HW access to the bus for arbitrary number of
+ * with PSP are able to lock HW access to the bus for arbitrary number of
  * operations - that is e.g. write-wait-read.
  */
 static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter,
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 5e28f50e4ce6..91bdedbe1a02 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -127,6 +127,8 @@ static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val)
  * Autodetects needed register access mode and creates the regmap with
  * corresponding read/write callbacks. This must be called before doing any
  * other register access.
+ *
+ * Return: 0 on success, or negative errno otherwise.
  */
 int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
 {
@@ -174,7 +176,7 @@ int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
 	/*
 	 * Note we'll check the return value of the regmap IO accessors only
 	 * at the probe stage. The rest of the code won't do this because
-	 * basically we have MMIO-based regmap so non of the read/write methods
+	 * basically we have MMIO-based regmap, so none of the read/write methods
 	 * can fail.
 	 */
 	dev->map = devm_regmap_init(dev->dev, NULL, dev, &map_cfg);
@@ -336,7 +338,7 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
 
 	acpi_speed = i2c_acpi_find_bus_speed(device);
 	/*
-	 * Some DSTDs use a non standard speed, round down to the lowest
+	 * Some DSDTs use a non standard speed, round down to the lowest
 	 * standard speed.
 	 */
 	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
@@ -532,7 +534,7 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)
 
 		/*
 		 * Wait 10 times the signaling period of the highest I2C
-		 * transfer supported by the driver (for 400KHz this is
+		 * transfer supported by the driver (for 400kHz this is
 		 * 25us) as described in the DesignWare I2C databook.
 		 */
 		usleep_range(25, 250);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 7479cb3a450d..5405d4da2b7d 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -141,10 +141,10 @@
 #define DW_IC_SLAVE				1
 
 /*
- * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register.
  *
- * Only expected abort codes are listed here
- * refer to the datasheet for the full list
+ * Only expected abort codes are listed here,
+ * refer to the datasheet for the full list.
  */
 #define ABRT_7B_ADDR_NOACK			0
 #define ABRT_10ADDR1_NOACK			1
@@ -201,7 +201,7 @@ struct i2c_dw_semaphore_callbacks;
  * @rst: optional reset for the controller
  * @slave: represent an I2C slave device
  * @get_clk_rate_khz: callback to retrieve IP specific bus speed
- * @cmd_err: run time hadware error code
+ * @cmd_err: run time hardware error code
  * @msgs: points to an array of messages currently being transferred
  * @msgs_num: the number of elements in msgs
  * @msg_write_idx: the element index of the current tx message in the msgs array
@@ -236,7 +236,7 @@ struct i2c_dw_semaphore_callbacks;
  * @release_lock: function to release a hardware lock on the bus
  * @semaphore_idx: Index of table with semaphore type attached to the bus. It's
  *	-1 if there is no semaphore.
- * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
+ * @shared_with_punit: true if this bus is shared with the SoC's PUNIT
  * @init: function to initialize the I2C hardware
  * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing
  * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index bd3c8db521de..4ef4160db01f 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -168,12 +168,14 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 }
 
 /**
- * i2c_dw_init_master() - Initialize the designware I2C master hardware
+ * i2c_dw_init_master() - Initialize the DesignWare I2C master hardware
  * @dev: device private data
  *
  * This functions configures and enables the I2C master.
  * This function is called during I2C init function, and in case of timeout at
  * run time.
+ *
+ * Return: 0 on success, or negative errno otherwise.
  */
 static int i2c_dw_init_master(struct dw_i2c_dev *dev)
 {
@@ -314,7 +316,7 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 		/*
 		 * Initiate the i2c read/write transaction of buffer length,
 		 * and poll for bus busy status. For the last message transfer,
-		 * update the command with stopbit enable.
+		 * update the command with stop bit enable.
 		 */
 		for (msg_itr_lmt = buf_len; msg_itr_lmt > 0; msg_itr_lmt--) {
 			if (msg_wrt_idx == num_msgs - 1 && msg_itr_lmt == 1)
@@ -421,7 +423,7 @@ static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msg
 
 /*
  * Initiate (and continue) low level master read/write transaction.
- * This function is only called from i2c_dw_isr, and pumping i2c_msg
+ * This function is only called from i2c_dw_isr(), and pumping i2c_msg
  * messages into the tx buffer.  Even if the size of i2c_msg data is
  * longer than the size of the tx buffer, it handles everything.
  */
@@ -459,7 +461,8 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 			buf = msgs[dev->msg_write_idx].buf;
 			buf_len = msgs[dev->msg_write_idx].len;
 
-			/* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
+			/*
+			 * If both IC_EMPTYFIFO_HOLD_MASTER_EN and
 			 * IC_RESTART_EN are set, we must manually
 			 * set restart bit between messages.
 			 */
@@ -949,7 +952,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 	rinfo->unprepare_recovery = i2c_dw_unprepare_recovery;
 	adap->bus_recovery_info = rinfo;
 
-	dev_info(dev->dev, "running with gpio recovery mode! scl%s",
+	dev_info(dev->dev, "running with GPIO recovery mode! scl%s",
 		 rinfo->sda_gpiod ? ",sda" : "");
 
 	return 0;
@@ -1053,7 +1056,7 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
 			       dev_name(dev->dev), dev);
 	if (ret) {
-		dev_err(dev->dev, "failure requesting irq %i: %d\n",
+		dev_err(dev->dev, "failure requesting IRQ %i: %d\n",
 			dev->irq, ret);
 		return ret;
 	}
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 02dc1d1001f2..fa9c0c56b11e 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -72,7 +72,7 @@ static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val)
 		return ret;
 
 	return regmap_write(dev->sysmap, BT1_I2C_CTL,
-		BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK));
+			    BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK));
 }
 
 static struct regmap_config bt1_i2c_cfg = {
@@ -304,7 +304,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	adap = &dev->adapter;
 	adap->owner = THIS_MODULE;
 	adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ?
-					I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
+				       I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
 	adap->nr = -1;
 
 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND)
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 5abd5ec41954..21d80fe81cfe 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -32,12 +32,14 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
 }
 
 /**
- * i2c_dw_init_slave() - Initialize the designware i2c slave hardware
+ * i2c_dw_init_slave() - Initialize the DesignWare i2c slave hardware
  * @dev: device private data
  *
  * This function configures and enables the I2C in slave mode.
  * This function is called during I2C init function, and in case of timeout at
  * run time.
+ *
+ * Return: 0 on success, or negative errno otherwise.
  */
 static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
 {
@@ -264,7 +266,7 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave,
 			       IRQF_SHARED, dev_name(dev->dev), dev);
 	if (ret) {
-		dev_err(dev->dev, "failure requesting irq %i: %d\n",
+		dev_err(dev->dev, "failure requesting IRQ %i: %d\n",
 			dev->irq, ret);
 		return ret;
 	}
-- 
2.43.0.rc1.1.gbec44491f096

Re: [PATCH v3 25/25] i2c: designware: Fix spelling and other issues in the comments

[Mario Limonciello]

On 11/10/2023 12:11, Andy Shevchenko wrote:
> Fix spelling and other issues, such as kernel-doc reported about,
> in the comments. While at it, fix some indentation issues as well.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/i2c/busses/i2c-designware-amdpsp.c  | 10 +++++-----
>   drivers/i2c/busses/i2c-designware-common.c  |  8 +++++---
>   drivers/i2c/busses/i2c-designware-core.h    | 10 +++++-----
>   drivers/i2c/busses/i2c-designware-master.c  | 15 +++++++++------
>   drivers/i2c/busses/i2c-designware-platdrv.c |  4 ++--
>   drivers/i2c/busses/i2c-designware-slave.c   |  6 ++++--
>   6 files changed, 30 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-amdpsp.c b/drivers/i2c/busses/i2c-designware-amdpsp.c
> index 63454b06e5da..8fbd2a10c31a 100644
> --- a/drivers/i2c/busses/i2c-designware-amdpsp.c
> +++ b/drivers/i2c/busses/i2c-designware-amdpsp.c
> @@ -155,7 +155,7 @@ static void psp_release_i2c_bus_deferred(struct work_struct *work)
>   
>   	/*
>   	 * If there is any pending transaction, cannot release the bus here.
> -	 * psp_release_i2c_bus will take care of this later.
> +	 * psp_release_i2c_bus() will take care of this later.
>   	 */
>   	if (psp_i2c_access_count)
>   		goto cleanup;
> @@ -210,12 +210,12 @@ static void psp_release_i2c_bus(void)
>   {
>   	mutex_lock(&psp_i2c_access_mutex);
>   
> -	/* Return early if mailbox was malfunctional */
> +	/* Return early if mailbox was malfunctioned */
>   	if (psp_i2c_mbox_fail)
>   		goto cleanup;
>   
>   	/*
> -	 * If we are last owner of PSP semaphore, need to release aribtration
> +	 * If we are last owner of PSP semaphore, need to release arbitration
>   	 * via mailbox.
>   	 */
>   	psp_i2c_access_count--;
> @@ -235,9 +235,9 @@ static void psp_release_i2c_bus(void)
>   
>   /*
>    * Locking methods are based on the default implementation from
> - * drivers/i2c/i2c-core-base.c, but with psp acquire and release operations
> + * drivers/i2c/i2c-core-base.c, but with PSP acquire and release operations
>    * added. With this in place we can ensure that i2c clients on the bus shared
> - * with psp are able to lock HW access to the bus for arbitrary number of
> + * with PSP are able to lock HW access to the bus for arbitrary number of
>    * operations - that is e.g. write-wait-read.
>    */
>   static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter,
> diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
> index 5e28f50e4ce6..91bdedbe1a02 100644
> --- a/drivers/i2c/busses/i2c-designware-common.c
> +++ b/drivers/i2c/busses/i2c-designware-common.c
> @@ -127,6 +127,8 @@ static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val)
>    * Autodetects needed register access mode and creates the regmap with
>    * corresponding read/write callbacks. This must be called before doing any
>    * other register access.
> + *
> + * Return: 0 on success, or negative errno otherwise.
>    */
>   int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
>   {
> @@ -174,7 +176,7 @@ int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
>   	/*
>   	 * Note we'll check the return value of the regmap IO accessors only
>   	 * at the probe stage. The rest of the code won't do this because
> -	 * basically we have MMIO-based regmap so non of the read/write methods
> +	 * basically we have MMIO-based regmap, so none of the read/write methods
>   	 * can fail.
>   	 */
>   	dev->map = devm_regmap_init(dev->dev, NULL, dev, &map_cfg);
> @@ -336,7 +338,7 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
>   
>   	acpi_speed = i2c_acpi_find_bus_speed(device);
>   	/*
> -	 * Some DSTDs use a non standard speed, round down to the lowest
> +	 * Some DSDTs use a non standard speed, round down to the lowest
>   	 * standard speed.
>   	 */
>   	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
> @@ -532,7 +534,7 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)
>   
>   		/*
>   		 * Wait 10 times the signaling period of the highest I2C
> -		 * transfer supported by the driver (for 400KHz this is
> +		 * transfer supported by the driver (for 400kHz this is
>   		 * 25us) as described in the DesignWare I2C databook.
>   		 */
>   		usleep_range(25, 250);
> diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
> index 7479cb3a450d..5405d4da2b7d 100644
> --- a/drivers/i2c/busses/i2c-designware-core.h
> +++ b/drivers/i2c/busses/i2c-designware-core.h
> @@ -141,10 +141,10 @@
>   #define DW_IC_SLAVE				1
>   
>   /*
> - * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
> + * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register.
>    *
> - * Only expected abort codes are listed here
> - * refer to the datasheet for the full list
> + * Only expected abort codes are listed here,
> + * refer to the datasheet for the full list.
>    */
>   #define ABRT_7B_ADDR_NOACK			0
>   #define ABRT_10ADDR1_NOACK			1
> @@ -201,7 +201,7 @@ struct i2c_dw_semaphore_callbacks;
>    * @rst: optional reset for the controller
>    * @slave: represent an I2C slave device
>    * @get_clk_rate_khz: callback to retrieve IP specific bus speed
> - * @cmd_err: run time hadware error code
> + * @cmd_err: run time hardware error code
>    * @msgs: points to an array of messages currently being transferred
>    * @msgs_num: the number of elements in msgs
>    * @msg_write_idx: the element index of the current tx message in the msgs array
> @@ -236,7 +236,7 @@ struct i2c_dw_semaphore_callbacks;
>    * @release_lock: function to release a hardware lock on the bus
>    * @semaphore_idx: Index of table with semaphore type attached to the bus. It's
>    *	-1 if there is no semaphore.
> - * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
> + * @shared_with_punit: true if this bus is shared with the SoC's PUNIT
>    * @init: function to initialize the I2C hardware
>    * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing
>    * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
> diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
> index bd3c8db521de..4ef4160db01f 100644
> --- a/drivers/i2c/busses/i2c-designware-master.c
> +++ b/drivers/i2c/busses/i2c-designware-master.c
> @@ -168,12 +168,14 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
>   }
>   
>   /**
> - * i2c_dw_init_master() - Initialize the designware I2C master hardware
> + * i2c_dw_init_master() - Initialize the DesignWare I2C master hardware
>    * @dev: device private data
>    *
>    * This functions configures and enables the I2C master.
>    * This function is called during I2C init function, and in case of timeout at
>    * run time.
> + *
> + * Return: 0 on success, or negative errno otherwise.
>    */
>   static int i2c_dw_init_master(struct dw_i2c_dev *dev)
>   {
> @@ -314,7 +316,7 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
>   		/*
>   		 * Initiate the i2c read/write transaction of buffer length,
>   		 * and poll for bus busy status. For the last message transfer,
> -		 * update the command with stopbit enable.
> +		 * update the command with stop bit enable.
>   		 */
>   		for (msg_itr_lmt = buf_len; msg_itr_lmt > 0; msg_itr_lmt--) {
>   			if (msg_wrt_idx == num_msgs - 1 && msg_itr_lmt == 1)
> @@ -421,7 +423,7 @@ static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msg
>   
>   /*
>    * Initiate (and continue) low level master read/write transaction.
> - * This function is only called from i2c_dw_isr, and pumping i2c_msg
> + * This function is only called from i2c_dw_isr(), and pumping i2c_msg
>    * messages into the tx buffer.  Even if the size of i2c_msg data is
>    * longer than the size of the tx buffer, it handles everything.
>    */
> @@ -459,7 +461,8 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
>   			buf = msgs[dev->msg_write_idx].buf;
>   			buf_len = msgs[dev->msg_write_idx].len;
>   
> -			/* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
> +			/*
> +			 * If both IC_EMPTYFIFO_HOLD_MASTER_EN and
>   			 * IC_RESTART_EN are set, we must manually
>   			 * set restart bit between messages.
>   			 */
> @@ -949,7 +952,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
>   	rinfo->unprepare_recovery = i2c_dw_unprepare_recovery;
>   	adap->bus_recovery_info = rinfo;
>   
> -	dev_info(dev->dev, "running with gpio recovery mode! scl%s",
> +	dev_info(dev->dev, "running with GPIO recovery mode! scl%s",
>   		 rinfo->sda_gpiod ? ",sda" : "");
>   
>   	return 0;
> @@ -1053,7 +1056,7 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
>   	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
>   			       dev_name(dev->dev), dev);
>   	if (ret) {
> -		dev_err(dev->dev, "failure requesting irq %i: %d\n",
> +		dev_err(dev->dev, "failure requesting IRQ %i: %d\n",
>   			dev->irq, ret);
>   		return ret;
>   	}
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 02dc1d1001f2..fa9c0c56b11e 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -72,7 +72,7 @@ static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val)
>   		return ret;
>   
>   	return regmap_write(dev->sysmap, BT1_I2C_CTL,
> -		BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK));
> +			    BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK));
>   }
>   
>   static struct regmap_config bt1_i2c_cfg = {
> @@ -304,7 +304,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
>   	adap = &dev->adapter;
>   	adap->owner = THIS_MODULE;
>   	adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ?
> -					I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
> +				       I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
>   	adap->nr = -1;
>   
>   	if (dev->flags & ACCESS_NO_IRQ_SUSPEND)
> diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
> index 5abd5ec41954..21d80fe81cfe 100644
> --- a/drivers/i2c/busses/i2c-designware-slave.c
> +++ b/drivers/i2c/busses/i2c-designware-slave.c
> @@ -32,12 +32,14 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
>   }
>   
>   /**
> - * i2c_dw_init_slave() - Initialize the designware i2c slave hardware
> + * i2c_dw_init_slave() - Initialize the DesignWare i2c slave hardware
>    * @dev: device private data
>    *
>    * This function configures and enables the I2C in slave mode.
>    * This function is called during I2C init function, and in case of timeout at
>    * run time.
> + *
> + * Return: 0 on success, or negative errno otherwise.
>    */
>   static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
>   {
> @@ -264,7 +266,7 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
>   	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave,
>   			       IRQF_SHARED, dev_name(dev->dev), dev);
>   	if (ret) {
> -		dev_err(dev->dev, "failure requesting irq %i: %d\n",
> +		dev_err(dev->dev, "failure requesting IRQ %i: %d\n",
>   			dev->irq, ret);
>   		return ret;
>   	}

Re: [PATCH v3 23/25] i2c: designware: Use temporary variable for struct device

[Mario Limonciello]

On 11/10/2023 12:11, Andy Shevchenko wrote:
> Use temporary variable for struct device to make code neater.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/i2c/busses/i2c-designware-pcidrv.c  | 24 +++++++-------
>   drivers/i2c/busses/i2c-designware-platdrv.c | 35 ++++++++++-----------
>   2 files changed, 27 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
> index 826c0c0a7c8d..34002c5eb67c 100644
> --- a/drivers/i2c/busses/i2c-designware-pcidrv.c
> +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
> @@ -207,6 +207,7 @@ static const struct software_node dgpu_node = {
>   static int i2c_dw_pci_probe(struct pci_dev *pdev,
>   			    const struct pci_device_id *id)
>   {
> +	struct device *device = &pdev->dev;
>   	struct dw_i2c_dev *dev;
>   	struct i2c_adapter *adap;
>   	int r;
> @@ -214,25 +215,22 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
>   	struct dw_scl_sda_cfg *cfg;
>   
>   	if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers))
> -		return dev_err_probe(&pdev->dev, -EINVAL,
> -				     "Invalid driver data %ld\n",
> +		return dev_err_probe(device, -EINVAL, "Invalid driver data %ld\n",
>   				     id->driver_data);
>   
>   	controller = &dw_pci_controllers[id->driver_data];
>   
>   	r = pcim_enable_device(pdev);
>   	if (r)
> -		return dev_err_probe(&pdev->dev, r,
> -				     "Failed to enable I2C PCI device\n");
> +		return dev_err_probe(device, r, "Failed to enable I2C PCI device\n");
>   
>   	pci_set_master(pdev);
>   
>   	r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
>   	if (r)
> -		return dev_err_probe(&pdev->dev, r,
> -				     "I/O memory remapping failed\n");
> +		return dev_err_probe(device, r, "I/O memory remapping failed\n");
>   
> -	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> +	dev = devm_kzalloc(device, sizeof(*dev), GFP_KERNEL);
>   	if (!dev)
>   		return -ENOMEM;
>   
> @@ -242,7 +240,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
>   
>   	dev->get_clk_rate_khz = controller->get_clk_rate_khz;
>   	dev->base = pcim_iomap_table(pdev)[0];
> -	dev->dev = &pdev->dev;
> +	dev->dev = device;
>   	dev->irq = pci_irq_vector(pdev, 0);
>   	dev->flags |= controller->flags;
>   
> @@ -281,14 +279,14 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
>   	if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
>   		dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, &dgpu_node);
>   		if (IS_ERR(dev->slave))
> -			return dev_err_probe(dev->dev, PTR_ERR(dev->slave),
> +			return dev_err_probe(device, PTR_ERR(dev->slave),
>   					     "register UCSI failed\n");
>   	}
>   
> -	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
> -	pm_runtime_use_autosuspend(&pdev->dev);
> -	pm_runtime_put_autosuspend(&pdev->dev);
> -	pm_runtime_allow(&pdev->dev);
> +	pm_runtime_set_autosuspend_delay(device, 1000);
> +	pm_runtime_use_autosuspend(device);
> +	pm_runtime_put_autosuspend(device);
> +	pm_runtime_allow(device);
>   
>   	return 0;
>   }
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 1b76f721bf81..02dc1d1001f2 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -237,6 +237,7 @@ static int dw_i2c_plat_get_reset(struct dw_i2c_dev *dev)
>   
>   static int dw_i2c_plat_probe(struct platform_device *pdev)
>   {
> +	struct device *device = &pdev->dev;
>   	struct i2c_adapter *adap;
>   	struct dw_i2c_dev *dev;
>   	int irq, ret;
> @@ -245,15 +246,15 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
>   	if (irq < 0)
>   		return irq;
>   
> -	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
> +	dev = devm_kzalloc(device, sizeof(*dev), GFP_KERNEL);
>   	if (!dev)
>   		return -ENOMEM;
>   
> -	dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
> -	if (device_property_present(&pdev->dev, "wx,i2c-snps-model"))
> +	dev->flags = (uintptr_t)device_get_match_data(device);
> +	if (device_property_present(device, "wx,i2c-snps-model"))
>   		dev->flags = MODEL_WANGXUN_SP;
>   
> -	dev->dev = &pdev->dev;
> +	dev->dev = device;
>   	dev->irq = irq;
>   	platform_set_drvdata(pdev, dev);
>   
> @@ -276,11 +277,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
>   	i2c_dw_configure(dev);
>   
>   	/* Optional interface clock */
> -	dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
> +	dev->pclk = devm_clk_get_optional(device, "pclk");
>   	if (IS_ERR(dev->pclk))
>   		return PTR_ERR(dev->pclk);
>   
> -	dev->clk = devm_clk_get_optional(&pdev->dev, NULL);
> +	dev->clk = devm_clk_get_optional(device, NULL);
>   	if (IS_ERR(dev->clk))
>   		return PTR_ERR(dev->clk);
>   
> @@ -306,23 +307,19 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
>   					I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
>   	adap->nr = -1;
>   
> -	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
> -		dev_pm_set_driver_flags(&pdev->dev,
> -					DPM_FLAG_SMART_PREPARE);
> -	} else {
> -		dev_pm_set_driver_flags(&pdev->dev,
> -					DPM_FLAG_SMART_PREPARE |
> -					DPM_FLAG_SMART_SUSPEND);
> -	}
> +	if (dev->flags & ACCESS_NO_IRQ_SUSPEND)
> +		dev_pm_set_driver_flags(device, DPM_FLAG_SMART_PREPARE);
> +	else
> +		dev_pm_set_driver_flags(device, DPM_FLAG_SMART_PREPARE | DPM_FLAG_SMART_SUSPEND);
>   
> -	device_enable_async_suspend(&pdev->dev);
> +	device_enable_async_suspend(device);
>   
>   	/* The code below assumes runtime PM to be disabled. */
> -	WARN_ON(pm_runtime_enabled(&pdev->dev));
> +	WARN_ON(pm_runtime_enabled(device));
>   
> -	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
> -	pm_runtime_use_autosuspend(&pdev->dev);
> -	pm_runtime_set_active(&pdev->dev);
> +	pm_runtime_set_autosuspend_delay(device, 1000);
> +	pm_runtime_use_autosuspend(device);
> +	pm_runtime_set_active(device);
>   
>   	ret = dw_i2c_plat_pm_setup(dev);
>   	if (ret)

Re: [PATCH v3 10/25] i2c: designware: Unify terminator in device ID tables

[Mario Limonciello]

On 11/10/2023 12:11, Andy Shevchenko wrote:
> Make the terminator entry look the same in all device ID tables.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/i2c/busses/i2c-designware-pcidrv.c  | 2 +-
>   drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++--
>   2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
> index db642e0aa61f..7f04dc33e6f7 100644
> --- a/drivers/i2c/busses/i2c-designware-pcidrv.c
> +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
> @@ -402,7 +402,7 @@ static const struct pci_device_id i2c_designware_pci_ids[] = {
>   	{ PCI_VDEVICE(ATI,  0x73c4), navi_amd },
>   	{ PCI_VDEVICE(ATI,  0x7444), navi_amd },
>   	{ PCI_VDEVICE(ATI,  0x7464), navi_amd },
> -	{ 0,}
> +	{}
>   };
>   MODULE_DEVICE_TABLE(pci, i2c_designware_pci_ids);
>   
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 5d8427ccc9b4..018c353a456a 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -57,7 +57,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
>   	{ "HISI02A2", 0 },
>   	{ "HISI02A3", 0 },
>   	{ "HYGO0010", ACCESS_INTR_MASK },
> -	{ }
> +	{}
>   };
>   MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
>   #endif
> @@ -153,7 +153,7 @@ static const struct of_device_id dw_i2c_of_match[] = {
>   	{ .compatible = "snps,designware-i2c", },
>   	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
>   	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
> -	{},
> +	{}
>   };
>   MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
>   #else

Re: [PATCH v3 09/25] i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()

[Mario Limonciello]

On 11/10/2023 12:11, Andy Shevchenko wrote:
> As Krzysztof Kozlowski pointed out the better is to use
> MODULE_DEVICE_TABLE() as it will be consistent with the content
> of the real ID table of the platform devices.
> 
> While at it, drop unneeded and unused module alias in PCI glue
> driver as PCI already has its own ID table and automatic loading
> should just work.
> 
> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/i2c/busses/i2c-designware-pcidrv.c  | 2 --
>   drivers/i2c/busses/i2c-designware-platdrv.c | 8 ++++++--
>   2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
> index d2ed4e77afb3..db642e0aa61f 100644
> --- a/drivers/i2c/busses/i2c-designware-pcidrv.c
> +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
> @@ -417,8 +417,6 @@ static struct pci_driver dw_i2c_driver = {
>   };
>   module_pci_driver(dw_i2c_driver);
>   
> -/* Work with hotplug and coldplug */
> -MODULE_ALIAS("i2c_designware-pci");
>   MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
>   MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
>   MODULE_LICENSE("GPL");
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 4b5e58e1ce5b..5d8427ccc9b4 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -486,8 +486,11 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
>   	RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
>   };
>   
> -/* Work with hotplug and coldplug */
> -MODULE_ALIAS("platform:i2c_designware");
> +static const struct platform_device_id dw_i2c_platform_ids[] = {
> +	{ "i2c_designware" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(platform, dw_i2c_platform_ids);
>   
>   static struct platform_driver dw_i2c_driver = {
>   	.probe = dw_i2c_plat_probe,
> @@ -498,6 +501,7 @@ static struct platform_driver dw_i2c_driver = {
>   		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
>   		.pm	= pm_ptr(&dw_i2c_dev_pm_ops),
>   	},
> +	.id_table = dw_i2c_platform_ids,
>   };
>   
>   static int __init dw_i2c_init_driver(void)

Re: [PATCH v3 14/25] i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()

[Mario Limonciello]

On 11/10/2023 12:11, Andy Shevchenko wrote:
> For the sake of consistency, rename dw_i2c_of_configure() and change
> its parameter to be aligned with the i2c_dw_acpi_configure().
> 
> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/i2c/busses/i2c-designware-platdrv.c | 9 +++++----
>   1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 7449f1b37ecf..b8606b651feb 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -110,9 +110,10 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
>   	return 0;
>   }
>   
> -static void dw_i2c_of_configure(struct platform_device *pdev)
> +static void i2c_dw_of_configure(struct device *device)
>   {
> -	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
> +	struct platform_device *pdev = to_platform_device(device);
> +	struct dw_i2c_dev *dev = dev_get_drvdata(device);
>   
>   	switch (dev->flags & MODEL_MASK) {
>   	case MODEL_MSCC_OCELOT:
> @@ -130,7 +131,7 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
>   	return -ENODEV;
>   }
>   
> -static inline void dw_i2c_of_configure(struct platform_device *pdev)
> +static inline void i2c_dw_of_configure(struct device *device)
>   {
>   }
>   #endif
> @@ -306,7 +307,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
>   	i2c_dw_adjust_bus_speed(dev);
>   
>   	if (pdev->dev.of_node)
> -		dw_i2c_of_configure(pdev);
> +		i2c_dw_of_configure(&pdev->dev);
>   
>   	if (has_acpi_companion(&pdev->dev))
>   		i2c_dw_acpi_configure(&pdev->dev);

Re: [PATCH v3 06/25] i2c: designware: Replace a while-loop by for-loop

[Mario Limonciello]

On 11/10/2023 12:11, Andy Shevchenko wrote:
> Replace a while-loop by for-loop in i2c_dw_probe_lock_support() to
> save a few lines of code.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/i2c/busses/i2c-designware-platdrv.c | 5 +----
>   1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 63cc3cdca2c7..cb954f11540e 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -260,11 +260,9 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
>   	int i = 0;
>   	int ret;
>   
> -	ptr = i2c_dw_semaphore_cb_table;
> -
>   	dev->semaphore_idx = -1;
>   
> -	while (ptr->probe) {
> +	for (ptr = i2c_dw_semaphore_cb_table; ptr->probe; ptr++) {
>   		ret = ptr->probe(dev);
>   		if (ret) {
>   			/*
> @@ -276,7 +274,6 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
>   				return ret;
>   
>   			i++;
> -			ptr++;
>   			continue;
>   		}
>   

Re: [PATCH v3 13/25] i2c: designware: Drop return value from dw_i2c_of_configure()

[Mario Limonciello]

On 11/10/2023 12:11, Andy Shevchenko wrote:
> dw_i2c_of_configure() is called without checking of the returned
> value, hence just drop it by converting to void.
> 
> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/i2c/busses/i2c-designware-platdrv.c | 7 ++-----
>   1 file changed, 2 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 15f19ec20b33..7449f1b37ecf 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -110,7 +110,7 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
>   	return 0;
>   }
>   
> -static int dw_i2c_of_configure(struct platform_device *pdev)
> +static void dw_i2c_of_configure(struct platform_device *pdev)
>   {
>   	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
>   
> @@ -123,8 +123,6 @@ static int dw_i2c_of_configure(struct platform_device *pdev)
>   	default:
>   		break;
>   	}
> -
> -	return 0;
>   }
>   #else
>   static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
> @@ -132,9 +130,8 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
>   	return -ENODEV;
>   }
>   
> -static inline int dw_i2c_of_configure(struct platform_device *pdev)
> +static inline void dw_i2c_of_configure(struct platform_device *pdev)
>   {
> -	return -ENODEV;
>   }
>   #endif
>   

Re: [PATCH v3 18/25] i2c: designware: Remove ->disable() callback

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> Commit 90312351fd1e ("i2c: designware: MASTER mode as separated driver")
> introduced ->disable() callback but there is no real use for it. Both
> i2c-designware-master.c and i2c-designware-slave.c set it to the same
> i2c_dw_disable() and scope is inside the same kernel module.
> 
> That said, replace the callback by explicitly calling the i2c_dw_disable().
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/i2c-designware-core.h    | 2 --
>   drivers/i2c/busses/i2c-designware-master.c  | 1 -
>   drivers/i2c/busses/i2c-designware-pcidrv.c  | 4 ++--
>   drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++--
>   drivers/i2c/busses/i2c-designware-slave.c   | 3 +--
>   5 files changed, 5 insertions(+), 9 deletions(-)
> 
Hmm... no report from kernel test robot but I'm getting build error 
below after this patch when driver (and I2C core) is built as module.

CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_SPI_DESIGNWARE=m

   CC [M]  drivers/i2c/busses/i2c-designware-common.o
   CC [M]  drivers/i2c/busses/i2c-designware-master.o
   CC [M]  drivers/i2c/busses/i2c-designware-slave.o
   CC [M]  drivers/i2c/busses/i2c-designware-platdrv.o
   CC [M]  drivers/i2c/busses/i2c-designware-baytrail.o
   CC [M]  drivers/i2c/busses/i2c-designware-pcidrv.o
   LD [M]  drivers/i2c/busses/i2c-designware-platform.o
   LD [M]  drivers/i2c/busses/i2c-designware-pci.o
   LD [M]  drivers/i2c/busses/i2c-designware-core.o
   MODPOST Module.symvers
ERROR: modpost: "i2c_dw_disable" 
[drivers/i2c/busses/i2c-designware-platform.ko] undefined!
ERROR: modpost: "i2c_dw_disable" 
[drivers/i2c/busses/i2c-designware-pci.ko] undefined!
make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Error 1
make[1]: *** [/workdisk/linux/linux/Makefile:1863: modpost] Error 2
make: *** [Makefile:234: __sub-make] Error 2

Re: [PATCH v3 01/25] i2c: designware: Delete adapter before disabling in i2c_dw_pci_remove()

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> Make i2c_dw_pci_remove() to be aligned with dw_i2c_plat_remove() on
> the sequence of the ceasing I²C operations.
> 
> Fixes: 18dbdda89f5c ("i2c-designware: Add runtime power management support")

I think this is wrong. Commit 18dbdda89f5c is 12 years ago so is this 
patch really fixing a real bug that was hiding all these years?

> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/i2c-designware-pcidrv.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
> index 61d7a27aa070..35d35d7c8e23 100644
> --- a/drivers/i2c/busses/i2c-designware-pcidrv.c
> +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
> @@ -354,11 +354,13 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
>   {
>   	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
>   
> +	i2c_del_adapter(&dev->adapter);
> +
>   	dev->disable(dev);
> +
>   	pm_runtime_forbid(&pdev->dev);
>   	pm_runtime_get_noresume(&pdev->dev);
>   
> -	i2c_del_adapter(&dev->adapter);
>   	devm_free_irq(&pdev->dev, dev->irq, dev);
>   	pci_free_irq_vectors(pdev);
>   }

Then I believe this patch may potentially introduce a bug. As far as I 
can see nothing wrong regarding adapter deletion after the commit 
18dbdda89f5c:

i2c_dw_pci_probe()
{
	...
	i2c_add_numbered_adapter()
	pm_runtime_enable_stuff()
	...
}

i2c_dw_pci_remove()
{
	...
	pm_runtime_disable_stuff()
	i2c_del_adapter()
	...
}

Order is still practically the same in current i2c-designware-pcidrv.c 
code but after this patch disabling/deletion is not done in reverse order.

Re: [PATCH v3 02/25] i2c: designware: Fix PM calls order in dw_i2c_plat_probe()

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> We should not mix managed calls with non-managed. This will break
> the calls order at the error path and ->remove() stages. Fix this
> by wrapping PM ops to become managed one.
> 
> Fixes: 36d48fb5766a ("i2c: designware-platdrv: enable RuntimePM before registering to the core")
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

I fail to see what was broken in above commit and how this patch fixes it?

> ---
>   drivers/i2c/busses/i2c-designware-platdrv.c | 28 ++++++++++++---------
>   1 file changed, 16 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 855b698e99c0..8b0099e1bc26 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -177,14 +177,26 @@ static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev)
>   	return 0;
>   }
>   
> -static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
> +static void dw_i2c_plat_pm_cleanup(void *data)
>   {
> +	struct dw_i2c_dev *dev = data;
> +
>   	pm_runtime_disable(dev->dev);
>   
>   	if (dev->shared_with_punit)
>   		pm_runtime_put_noidle(dev->dev);
>   }
>   
> +static int dw_i2c_plat_pm_setup(struct dw_i2c_dev *dev)
> +{
> +	if (dev->shared_with_punit)
> +		pm_runtime_get_noresume(dev->dev);
> +
> +	pm_runtime_enable(dev->dev);
> +
> +	return devm_add_action_or_reset(dev->dev, dw_i2c_plat_pm_cleanup, dev);
> +}
> +
>   static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
>   {
>   	struct platform_device *pdev = to_platform_device(dev->dev);
> @@ -381,19 +393,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
>   	pm_runtime_use_autosuspend(&pdev->dev);
>   	pm_runtime_set_active(&pdev->dev);
>   
> -	if (dev->shared_with_punit)
> -		pm_runtime_get_noresume(&pdev->dev);
> -
> -	pm_runtime_enable(&pdev->dev);
> -
> -	ret = i2c_dw_probe(dev);
> +	ret = dw_i2c_plat_pm_setup(dev);
>   	if (ret)
> -		goto exit_probe;
> +		goto exit_reset;
>   
> -	return ret;
> +	return i2c_dw_probe(dev);
>   
> -exit_probe:
> -	dw_i2c_plat_pm_cleanup(dev);
>   exit_reset:
>   	reset_control_assert(dev->rst);
>   	return ret;

Is it intended change the reset isn't asserted after this patch in case 
i2c_dw_probe() fails?

Re: [PATCH v3 03/25] i2c: designware: Fix reset call order in dw_i2c_plat_probe()

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> We should not mix managed calls with non-managed. This will break
> the calls order at the error path and ->remove() stages. Fix this
> by wrapping reset control to become managed one.
> 
> With that start checking the rerurn code from reset_control_deassert()
> as it may fail and calling assertion in that scenario is not always
> a good idea.
> 
> Fixes: ab809fd81fde ("i2c: designware: add reset interface")
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---

Again, was above commit so broken that this patch qualifies a Fixes tag?

Re: [PATCH v3 04/25] i2c: designware: Let PCI core to take care about interrupt vectors

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> PCI core, after pcim_enable_device(), takes care about the allocated
> IRQ vectors, no need to do it explicitly and break the cleaning up
> order.
> 
> Fixes: 21aa3983d619 ("i2c: designware-pci: Switch over to MSI interrupts")
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/i2c-designware-pcidrv.c | 15 +++------------
>   1 file changed, 3 insertions(+), 12 deletions(-)

...

> @@ -360,9 +354,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
>   
>   	pm_runtime_forbid(&pdev->dev);
>   	pm_runtime_get_noresume(&pdev->dev);
> -
> -	devm_free_irq(&pdev->dev, dev->irq, dev);
> -	pci_free_irq_vectors(pdev);

Instead of commit 21aa3983d619 I guess this patch is more around my 
commit 9be8bc4dd617 ("i2c: designware-pci: Fix BUG_ON during device 
removal")? But still I don't think it qualifies Fixes tag?

I was curious to see would this patch bring back above BUG_ON and 
fortunately not (rmmod/modprobe i2c_designware_pci on MSI enabled 
instance):-)

Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 02/25] i2c: designware: Fix PM calls order in dw_i2c_plat_probe()

[Andy Shevchenko]

On Wed, Nov 15, 2023 at 01:14:36PM +0200, Jarkko Nikula wrote:
> On 11/10/23 20:11, Andy Shevchenko wrote:
> > We should not mix managed calls with non-managed. This will break
> > the calls order at the error path and ->remove() stages. Fix this
> > by wrapping PM ops to become managed one.
> > 
> > Fixes: 36d48fb5766a ("i2c: designware-platdrv: enable RuntimePM before registering to the core")
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> 
> I fail to see what was broken in above commit and how this patch fixes it?

The order of the unwiding probed flow is broken now as devm_*() mixed with
non-devm_*() calls. This makes all non-devm_*() calls that interleave devm_*()
ones to be also devm_*()-wrapped.

...

> Is it intended change the reset isn't asserted after this patch in case
> i2c_dw_probe() fails?

Did you miss that this is become managed with this patch and hence the above
is false scenario?

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 01/25] i2c: designware: Delete adapter before disabling in i2c_dw_pci_remove()

[Andy Shevchenko]

On Wed, Nov 15, 2023 at 11:45:10AM +0200, Jarkko Nikula wrote:
> On 11/10/23 20:11, Andy Shevchenko wrote:
> > Make i2c_dw_pci_remove() to be aligned with dw_i2c_plat_remove() on
> > the sequence of the ceasing I²C operations.
> > 
> > Fixes: 18dbdda89f5c ("i2c-designware: Add runtime power management support")
> 
> I think this is wrong. Commit 18dbdda89f5c is 12 years ago so is this patch
> really fixing a real bug that was hiding all these years?

Why not? But let me check more careful the ordering between two and probe.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 02/25] i2c: designware: Fix PM calls order in dw_i2c_plat_probe()

[Andy Shevchenko]

On Wed, Nov 15, 2023 at 03:48:20PM +0200, Andy Shevchenko wrote:
> On Wed, Nov 15, 2023 at 01:14:36PM +0200, Jarkko Nikula wrote:
> > On 11/10/23 20:11, Andy Shevchenko wrote:

...

> > Is it intended change the reset isn't asserted after this patch in case
> > i2c_dw_probe() fails?
> 
> Did you miss that this is become managed with this patch and hence the above
> is false scenario?

Ah, I see now what you mean. Sorry, I though about next patch in mind.
Indeed, I need to amend this one.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 04/25] i2c: designware: Let PCI core to take care about interrupt vectors

[Andy Shevchenko]

On Wed, Nov 15, 2023 at 02:08:10PM +0200, Jarkko Nikula wrote:
> On 11/10/23 20:11, Andy Shevchenko wrote:

...

> > @@ -360,9 +354,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
> >   	pm_runtime_forbid(&pdev->dev);
> >   	pm_runtime_get_noresume(&pdev->dev);
> > -
> > -	devm_free_irq(&pdev->dev, dev->irq, dev);
> > -	pci_free_irq_vectors(pdev);
> 
> Instead of commit 21aa3983d619 I guess this patch is more around my commit
> 9be8bc4dd617 ("i2c: designware-pci: Fix BUG_ON during device removal")?

No, this one exactly what it says. Your patch is the side effect of the above
mentioned change.

> But
> still I don't think it qualifies Fixes tag?

Up to you, I can remove the fixes tag altogether, but it has the correct
commit ID there.

> I was curious to see would this patch bring back above BUG_ON and
> fortunately not (rmmod/modprobe i2c_designware_pci on MSI enabled
> instance):-)

How? PCI clean up will happen on the level of pcim_enable_device(),
i.e. quite after the IRQ will be freed.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 06/25] i2c: designware: Replace a while-loop by for-loop

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> Replace a while-loop by for-loop in i2c_dw_probe_lock_support() to
> save a few lines of code.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/i2c-designware-platdrv.c | 5 +----
>   1 file changed, 1 insertion(+), 4 deletions(-)
> 
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 07/25] i2c: designware: Save pointer to semaphore callbacks instead of index

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> Instead of saving index and do an additional level of referencing,
> save just a pointer to the semaphore callbacks directly. It makes
> code cleaner.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/i2c-designware-core.h    |  4 +++-
>   drivers/i2c/busses/i2c-designware-platdrv.c | 12 ++++--------
>   2 files changed, 7 insertions(+), 9 deletions(-)
> 
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 08/25] i2c: designware: Add missing 'c' into PCI IDs variable name

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> Add missing 'c' into i2c_designware_pci_ids variable name.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/i2c-designware-pcidrv.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 09/25] i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()

[Jarkko Nikula]

On 11/10/23 21:39, Mario Limonciello wrote:
> On 11/10/2023 12:11, Andy Shevchenko wrote:
>> As Krzysztof Kozlowski pointed out the better is to use
>> MODULE_DEVICE_TABLE() as it will be consistent with the content
>> of the real ID table of the platform devices.
>>
>> While at it, drop unneeded and unused module alias in PCI glue
>> driver as PCI already has its own ID table and automatic loading
>> should just work.
>>
>> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
>> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>

I'm using modular build and modules get autoloaded fine after this patch.

Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 10/25] i2c: designware: Unify terminator in device ID tables

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> Make the terminator entry look the same in all device ID tables.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/i2c-designware-pcidrv.c  | 2 +-
>   drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++--
>   2 files changed, 3 insertions(+), 3 deletions(-)
> 
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 10/25] i2c: designware: Unify terminator in device ID tables

[Jarkko Nikula]

On 11/10/23 21:38, Mario Limonciello wrote:
> On 11/10/2023 12:11, Andy Shevchenko wrote:
>> Make the terminator entry look the same in all device ID tables.
>>
>> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>

Sorry replying twice, wanted to make sure Mario's tag is noted.

Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 13/25] i2c: designware: Drop return value from dw_i2c_of_configure()

[Jarkko Nikula]

On 11/10/23 21:41, Mario Limonciello wrote:
> On 11/10/2023 12:11, Andy Shevchenko wrote:
>> dw_i2c_of_configure() is called without checking of the returned
>> value, hence just drop it by converting to void.
>>
>> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
>> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
>> ---
>>   drivers/i2c/busses/i2c-designware-platdrv.c | 7 ++-----
>>   1 file changed, 2 insertions(+), 5 deletions(-)
>>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 12/25] i2c: designware: Drop return value from i2c_dw_acpi_configure()

[Jarkko Nikula]

On 11/10/23 20:11, Andy Shevchenko wrote:
> i2c_dw_acpi_configure() is called without checking of the returned
> value, hence just drop it by converting to void.
> 
> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/i2c-designware-common.c | 4 +---
>   drivers/i2c/busses/i2c-designware-core.h   | 4 ++--
>   2 files changed, 3 insertions(+), 5 deletions(-)
> 
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 14/25] i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()

[Jarkko Nikula]

On 11/10/23 21:39, Mario Limonciello wrote:
> On 11/10/2023 12:11, Andy Shevchenko wrote:
>> For the sake of consistency, rename dw_i2c_of_configure() and change
>> its parameter to be aligned with the i2c_dw_acpi_configure().
>>
>> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
>> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
>> ---
>>   drivers/i2c/busses/i2c-designware-platdrv.c | 9 +++++----
>>   1 file changed, 5 insertions(+), 4 deletions(-)
>>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Re: [PATCH v3 10/25] i2c: designware: Unify terminator in device ID tables

[Andy Shevchenko]

On Fri, Nov 17, 2023 at 04:18:13PM +0200, Jarkko Nikula wrote:
> On 11/10/23 21:38, Mario Limonciello wrote:
> > On 11/10/2023 12:11, Andy Shevchenko wrote:
> > > Make the terminator entry look the same in all device ID tables.
> > > 
> > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> 
> Sorry replying twice, wanted to make sure Mario's tag is noted.

I am using `b4`, it collects tags from the entire thread (each email from it),
so no need to send twice or care about other's tags).

> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Thank you for the review!

-- 
With Best Regards,
Andy Shevchenko