From: Tim Lunn <tim@feathertop.org>
To: linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org
Cc: Jagan Teki <jagan@edgeble.ai>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Tim Lunn <tim@feathertop.org>, Rob Herring <robh+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
linux-arm-kernel@lists.infradead.org,
Conor Dooley <conor+dt@kernel.org>,
Andi Shyti <andi.shyti@kernel.org>,
linux-i2c@vger.kernel.org
Subject: [PATCH 0/8] Add support for Sonoff iHost RV1126 Smart Home Gateway
Date: Mon, 13 Nov 2023 23:06:57 +1100 [thread overview]
Message-ID: <20231113120705.1647498-1-tim@feathertop.org> (raw)
Sonoff iHost is gateway device designed to provide a Smart Home Hub,
it notably includes builtin radios for Wifi, BT and Zigbee, which
make it suitable SBC for use with many of the open home automation
platforms. It is availabe in two versions, first is based on
Rockchip RV1126 and 4GB DDR4 RAM. There is a second version with
based off the RV1109 dual core SoC and 2GB RAM.
Features:
- Rockchip RV1126 (or RV1109)
- 4GB DDR4
- 8GB eMMC
- microSD slot
- RMII Ethernet PHY
- 1x USB 2.0 Host
- 1x USB 2.0 OTG
- Realtek RTL8723DS WiFi/BT
- EFR32MG21 Silabs Zigbee radio
- Speaker/Microphone
This patch series adds the various device tree nodes required to
support this device. It also adds the initial dts for this device,
This work was largely based off the device trees for mainline
Edgeble Neu2 and downstream Rockchip rv1126-evb-v13 configs.
It has been adapted with relevant peripherals and GPIO pins for the
iHost.
Implemented in this series are most of the core periperhals including
Ethernet, Wifi, BT, Zigbee and RTC. Sound and USB will be added in a
later series.
Tim Lunn (8):
ARM: dts: rockchip: rv1126: Add alternate UART pins
ARM: dts: rockchip: rv1126: Serial aliases
i2c: rk3x: Adjust grf offset for i2c2 on rv1126
ARM: dts: rockchip: rv1126: Add i2c2 nodes
ARM: dts: rockchip: rv1126: Split up rgmii1 pinctrl
ARM: dts: rockchip: rv1126: Add ethernet alias
ARM: dts: Add Sonoff iHost Smart Home Hub
dt-bindings: arm: rockchip: Add Sonoff iHost
.../devicetree/bindings/arm/rockchip.yaml | 7 +
arch/arm/boot/dts/rockchip/Makefile | 2 +
.../boot/dts/rockchip/rv1109-sonoff-ihost.dts | 13 +
arch/arm/boot/dts/rockchip/rv1109.dtsi | 23 +
.../dts/rockchip/rv1126-edgeble-neu2-io.dts | 2 +-
.../arm/boot/dts/rockchip/rv1126-pinctrl.dtsi | 72 ++-
.../boot/dts/rockchip/rv1126-sonoff-ihost.dts | 13 +
.../dts/rockchip/rv1126-sonoff-ihost.dtsi | 409 ++++++++++++++++++
arch/arm/boot/dts/rockchip/rv1126.dtsi | 21 +
drivers/i2c/busses/i2c-rk3x.c | 8 +-
10 files changed, 554 insertions(+), 16 deletions(-)
create mode 100644 arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts
create mode 100644 arch/arm/boot/dts/rockchip/rv1109.dtsi
create mode 100644 arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts
create mode 100644 arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
--
2.40.1
next reply other threads:[~2023-11-13 12:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-13 12:06 Tim Lunn [this message]
2023-11-13 12:07 ` [PATCH 3/8] i2c: rk3x: Adjust grf offset for i2c2 on rv1126 Tim Lunn
2023-11-16 19:54 ` Heiko Stuebner
2023-11-18 0:31 ` Tim Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231113120705.1647498-1-tim@feathertop.org \
--to=tim@feathertop.org \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jagan@edgeble.ai \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox