[PATCH v3 0/6] i2c: designware: Generic polling mode code

[Jarkko Nikula <jarkko.nikula@linux.intel.com>]

Hi Jiawen, Sanket and Basavaraj

I hope you could give a quick test to this patchset to see it won't cause
regression on your HW. This is mostly the same than the first version what
Jiawen tested earlier but in this 3rd version I decided to drop semphore
touching code patches from v2 due they being out of scope and fix a few
things noted by Andy.

Changes are in the patch 3/6 with two minor fixes to comments while moving
them and the patch 6/6 where i2c_dw_wait_transfer() is slightly modified
by Andy's suggestion plus I decided to remove one comment which became
unclear after this patch.

v2:
https://lore.kernel.org/linux-i2c/20240206145158.227254-1-jarkko.nikula@linux.intel.com/

v1:
https://lore.kernel.org/linux-i2c/20240131141653.2689260-1-jarkko.nikula@linux.intel.com/

Jarkko Nikula (6):
  i2c: designware: Uniform initialization flow for polling mode
  i2c: designware: Do not enable interrupts shortly in polling mode
  i2c: designware: Use accessors to DW_IC_INTR_MASK register
  i2c: designware: Move interrupt handling functions before
    i2c_dw_xfer()
  i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC
  i2c: designware: Implement generic polling mode code for Wangxun 10Gb
    NIC

 drivers/i2c/busses/i2c-designware-common.c  |   2 +-
 drivers/i2c/busses/i2c-designware-core.h    |  23 +-
 drivers/i2c/busses/i2c-designware-master.c  | 419 +++++++++-----------
 drivers/i2c/busses/i2c-designware-pcidrv.c  |   2 +-
 drivers/i2c/busses/i2c-designware-platdrv.c |   2 +-
 5 files changed, 208 insertions(+), 240 deletions(-)

-- 
2.43.0