Re: [PATCH v4 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d

["Pali Rohár" <pali@kernel.org>]

On Monday 24 June 2024 13:15:12 Hans de Goede wrote:
> Hans de Goede (6):
>   i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
>   i2c: i801: Use a different adapter-name for IDF adapters
>   platform/x86: dell-smo8800: Move SMO88xx acpi_device_ids to
>     dell-smo8800-ids.h
>   platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client
>     from i2c-i801 to dell-lis3lv02d
>   platform/x86: dell-smo8800: Add a couple more models to
>     lis3lv02d_devices[]
>   platform/x86: dell-smo8800: Add support for probing for the
>     accelerometer i2c address

Patches 1-5 looks good. There are just a few minor things, but you can add
Reviewed-by: Pali Rohár <pali@kernel.org>

For patch 6 as I mentioned previously I'm strictly against this change
until somebody goes and politely ask Dell about the current situation of
the discovering of accelerometer's i2c address. And if there is no other
option than start discussion if Dell can include this information into
DMI / ACPI / WMI or other part of firmware data which they can send from
BIOS/UEFI to operating system.

>  drivers/i2c/busses/i2c-i801.c                | 133 +-------
>  drivers/i2c/i2c-core-base.c                  |  18 +-
>  drivers/platform/x86/dell/Makefile           |   1 +
>  drivers/platform/x86/dell/dell-lis3lv02d.c   | 331 +++++++++++++++++++
>  drivers/platform/x86/dell/dell-smo8800-ids.h |  26 ++
>  drivers/platform/x86/dell/dell-smo8800.c     |  16 +-
>  6 files changed, 379 insertions(+), 146 deletions(-)
>  create mode 100644 drivers/platform/x86/dell/dell-lis3lv02d.c
>  create mode 100644 drivers/platform/x86/dell/dell-smo8800-ids.h
> 
> -- 
> 2.45.1
>