[PATCH i2c-tools] eeprog: use force option when eeprog gets data from a pipe

Thomas Richard
2024-06-26T09:09:25Z

When a pipe is used to send data to eeprog, the force option shall be used.
If not, the first character is catched by confirm_action().

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
eeprog/eeprog.8 | 2 +-
eeprog/eeprog.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/eeprog/eeprog.8 b/eeprog/eeprog.8
index 6a61102..70f78ae 100644
--- a/eeprog/eeprog.8
+++ b/eeprog/eeprog.8
@@ -95,6 +95,6 @@ Write the current timestamp at address 0x200 of the EEPROM on bus 0 at address 0
.P
date |
.B eeprog
-/dev/i2c-0 0x33 -w 0x200
+-f /dev/i2c-0 0x33 -w 0x200
.SH AUTHOR
Stefano Barbato
diff --git a/eeprog/eeprog.c b/eeprog/eeprog.c
index 9978241..ef18ae1 100644
--- a/eeprog/eeprog.c
+++ b/eeprog/eeprog.c
@@ -65,7 +65,7 @@ void do_usage_if(int b, int line)
" eeprog /dev/i2c-1 0x51 -x -r 0x22:0x20\n"
" 3- write the current timestamp at address 0x200 of the EEPROM on\n"
" bus 0 at address 0x33\n"
-" date | eeprog /dev/i2c-0 0x33 -w 0x200\n";
+" date | eeprog -f /dev/i2c-0 0x33 -w 0x200\n";

if(!b)
return;
--
2.39.2