From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mario Limonciello <mario.limonciello@amd.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Andi Shyti <andi.shyti@kernel.org>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>,
linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>,
Jan Dabros <jsd@semihalf.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Narasimhan.V@amd.com, Borislav Petkov <bp@alien8.de>,
Kim Phillips <kim.phillips@amd.com>
Subject: [PATCH v1 1/5] i2c: designware: Use temporary variable for struct device
Date: Wed, 25 Sep 2024 15:44:19 +0300 [thread overview]
Message-ID: <20240925124916.976173-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20240925124916.976173-1-andriy.shevchenko@linux.intel.com>
Use temporary variable for struct device to make code neater.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/i2c/busses/i2c-designware-pcidrv.c | 29 ++++++-------
drivers/i2c/busses/i2c-designware-platdrv.c | 48 ++++++++++-----------
2 files changed, 37 insertions(+), 40 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 7b2c5d71a7fc..433cb285d3b2 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -207,6 +207,7 @@ static const struct software_node dgpu_node = {
static int i2c_dw_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ struct device *device = &pdev->dev;
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
int r;
@@ -214,25 +215,22 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
struct dw_scl_sda_cfg *cfg;
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers))
- return dev_err_probe(&pdev->dev, -EINVAL,
- "Invalid driver data %ld\n",
+ return dev_err_probe(device, -EINVAL, "Invalid driver data %ld\n",
id->driver_data);
controller = &dw_pci_controllers[id->driver_data];
r = pcim_enable_device(pdev);
if (r)
- return dev_err_probe(&pdev->dev, r,
- "Failed to enable I2C PCI device\n");
+ return dev_err_probe(device, r, "Failed to enable I2C PCI device\n");
pci_set_master(pdev);
r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
if (r)
- return dev_err_probe(&pdev->dev, r,
- "I/O memory remapping failed\n");
+ return dev_err_probe(device, r, "I/O memory remapping failed\n");
- dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ dev = devm_kzalloc(device, sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
@@ -242,7 +240,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
dev->get_clk_rate_khz = controller->get_clk_rate_khz;
dev->base = pcim_iomap_table(pdev)[0];
- dev->dev = &pdev->dev;
+ dev->dev = device;
dev->irq = pci_irq_vector(pdev, 0);
dev->flags |= controller->flags;
@@ -281,14 +279,14 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, &dgpu_node);
if (IS_ERR(dev->slave))
- return dev_err_probe(dev->dev, PTR_ERR(dev->slave),
+ return dev_err_probe(device, PTR_ERR(dev->slave),
"register UCSI failed\n");
}
- pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_put_autosuspend(&pdev->dev);
- pm_runtime_allow(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(device, 1000);
+ pm_runtime_use_autosuspend(device);
+ pm_runtime_put_autosuspend(device);
+ pm_runtime_allow(device);
return 0;
}
@@ -296,11 +294,12 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
static void i2c_dw_pci_remove(struct pci_dev *pdev)
{
struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
+ struct device *device = &pdev->dev;
i2c_dw_disable(dev);
- pm_runtime_forbid(&pdev->dev);
- pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_forbid(device);
+ pm_runtime_get_noresume(device);
i2c_del_adapter(&dev->adapter);
}
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 2d0c7348e491..a3e86930bf41 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -205,6 +205,7 @@ static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
+ struct device *device = &pdev->dev;
struct i2c_adapter *adap;
struct dw_i2c_dev *dev;
int irq, ret;
@@ -213,15 +214,15 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
- dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
+ dev = devm_kzalloc(device, sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
- dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
- if (device_property_present(&pdev->dev, "wx,i2c-snps-model"))
+ dev->flags = (uintptr_t)device_get_match_data(device);
+ if (device_property_present(device, "wx,i2c-snps-model"))
dev->flags = MODEL_WANGXUN_SP | ACCESS_POLLING;
- dev->dev = &pdev->dev;
+ dev->dev = device;
dev->irq = irq;
platform_set_drvdata(pdev, dev);
@@ -229,7 +230,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
if (ret)
return ret;
- dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+ dev->rst = devm_reset_control_get_optional_exclusive(device, NULL);
if (IS_ERR(dev->rst))
return PTR_ERR(dev->rst);
@@ -246,13 +247,13 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
i2c_dw_configure(dev);
/* Optional interface clock */
- dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
+ dev->pclk = devm_clk_get_optional(device, "pclk");
if (IS_ERR(dev->pclk)) {
ret = PTR_ERR(dev->pclk);
goto exit_reset;
}
- dev->clk = devm_clk_get_optional(&pdev->dev, NULL);
+ dev->clk = devm_clk_get_optional(device, NULL);
if (IS_ERR(dev->clk)) {
ret = PTR_ERR(dev->clk);
goto exit_reset;
@@ -280,28 +281,24 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
adap->nr = -1;
- if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
- dev_pm_set_driver_flags(&pdev->dev,
- DPM_FLAG_SMART_PREPARE);
- } else {
- dev_pm_set_driver_flags(&pdev->dev,
- DPM_FLAG_SMART_PREPARE |
- DPM_FLAG_SMART_SUSPEND);
- }
+ if (dev->flags & ACCESS_NO_IRQ_SUSPEND)
+ dev_pm_set_driver_flags(device, DPM_FLAG_SMART_PREPARE);
+ else
+ dev_pm_set_driver_flags(device, DPM_FLAG_SMART_PREPARE | DPM_FLAG_SMART_SUSPEND);
- device_enable_async_suspend(&pdev->dev);
+ device_enable_async_suspend(device);
/* The code below assumes runtime PM to be disabled. */
- WARN_ON(pm_runtime_enabled(&pdev->dev));
+ WARN_ON(pm_runtime_enabled(device));
- pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_active(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(device, 1000);
+ pm_runtime_use_autosuspend(device);
+ pm_runtime_set_active(device);
if (dev->shared_with_punit)
- pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_get_noresume(device);
- pm_runtime_enable(&pdev->dev);
+ pm_runtime_enable(device);
ret = i2c_dw_probe(dev);
if (ret)
@@ -319,15 +316,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
static void dw_i2c_plat_remove(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ struct device *device = &pdev->dev;
- pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_get_sync(device);
i2c_del_adapter(&dev->adapter);
i2c_dw_disable(dev);
- pm_runtime_dont_use_autosuspend(&pdev->dev);
- pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(device);
+ pm_runtime_put_sync(device);
dw_i2c_plat_pm_cleanup(dev);
i2c_dw_remove_lock_support(dev);
--
2.43.0.rc1.1336.g36b5255a03ac
next prev parent reply other threads:[~2024-09-25 12:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-25 12:44 [PATCH v1 0/5] i2c: designware: Cleanups (part 4) Andy Shevchenko
2024-09-25 12:44 ` Andy Shevchenko [this message]
2024-09-25 12:44 ` [PATCH v1 2/5] i2c: designware: Get rid of redundant 'else' Andy Shevchenko
2024-09-25 12:44 ` [PATCH v1 3/5] i2c: designware: Remove 'cond' from i2c_dw_scl_hcnt() Andy Shevchenko
2024-09-25 12:44 ` [PATCH v1 4/5] i2c: designware: Use sda_hold_time variable name everywhere Andy Shevchenko
2024-09-25 12:44 ` [PATCH v1 5/5] i2c: designware: Fix spelling and other issues in the comments Andy Shevchenko
2024-09-25 13:37 ` [PATCH v1 0/5] i2c: designware: Cleanups (part 4) Jarkko Nikula
2024-09-26 20:03 ` Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240925124916.976173-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=Narasimhan.V@amd.com \
--cc=andi.shyti@kernel.org \
--cc=bp@alien8.de \
--cc=jarkko.nikula@linux.intel.com \
--cc=jsd@semihalf.com \
--cc=kim.phillips@amd.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=mika.westerberg@linux.intel.com \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox