Re: [PATCH v6 2/2] i2c: spacemit: add support for SpacemiT K1 SoC

Alex Elder
2025-03-12T01:46:34Z

On 3/7/25 7:13 AM, Troy Mitchell wrote:
> This patch introduces basic I2C support for the SpacemiT K1 SoC,
> utilizing interrupts for transfers.
>
> The driver has been tested using i2c-tools on a Bananapi-F3 board,
> and basic I2C read/write operations have been confirmed to work.
>
> Signed-off-by: Troy Mitchell <troymitchell988@gmail.com>

I have a bunch of really small suggestions. Please consider
them, but whatever you choose to do this looks good to me.

Reviewed-by: Alex Elder <elder@riscstar.com>

> ---
> drivers/i2c/busses/Kconfig | 17 ++
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-k1.c | 601 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 619 insertions(+)
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index fc438f4457713d5559d163840a7b11e8cdbb8f58..12d0e99566d8625aa374279956b71a4034ded4ac 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -783,6 +783,23 @@ config I2C_JZ4780
>
> If you don't know what to do here, say N.
>
> +config I2C_K1
> + tristate "Spacemit K1 I2C adapter"
> + depends on ARCH_SPACEMIT || COMPILE_TEST
> + depends on OF
> + help
> + This option enables support for the I2C interface on the Spacemit K1
> + platform.
> +
> + If you enable this configuration, the kernel will include support for
> + the I2C adapter specific to the Spacemit K1 platform. This driver can
> + be used to manage I2C bus transactions, which are necessary for
> + interfacing with I2C peripherals such as sensors, EEPROMs, and other
> + devices.

Does SpacemiT prefer to have the T at the end of their name
capitalized?

> +
> + This driver can also be built as a module. If so, the
> + module will be called `i2c-k1`.
> +
> config I2C_KEBA
> tristate "KEBA I2C controller support"
> depends on HAS_IOMEM
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 1c2a4510abe44a689dfe67d2d64cf0cf3434f510..c1252e2b779e2e47492d66179b442f2202ec0416 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -74,6 +74,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o
> obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-lpi2c.o
> obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
> obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
> +obj-$(CONFIG_I2C_K1) += i2c-k1.o
> obj-$(CONFIG_I2C_KEBA) += i2c-keba.o
> obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
> obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o
> diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..1ef98a303fb14ce10d283225ce0617a0b9f405f7
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-k1.c
> @@ -0,0 +1,601 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2024 Troy Mitchell <troymitchell988@gmail.com>

Maybe update your copyright date(s) to include this year before
your final version of the patch.

> + */
> +
> + #include <linux/clk.h>
> + #include <linux/i2c.h>
> + #include <linux/iopoll.h>
> + #include <linux/module.h>
> + #include <linux/of_address.h>
> + #include <linux/platform_device.h>
> +
> +/* spacemit i2c registers */
> +#define SPACEMIT_ICR 0x0 /* Control Register */

s/Register/register/

> +#define SPACEMIT_ISR 0x4 /* Status Register */

s/Register/register/

> +#define SPACEMIT_IDBR 0xc /* Data Buffer Register */
s/Buffer Re/buffer re/

> +#define SPACEMIT_IBMR 0x1c /* Bus monitor register */
> +
> +/* SPACEMIT_ICR register fields */
> +#define SPACEMIT_CR_START BIT(0) /* start bit */
> +#define SPACEMIT_CR_STOP BIT(1) /* stop bit */
> +#define SPACEMIT_CR_ACKNAK BIT(2) /* send ACK(0) or NAK(1) */
> +#define SPACEMIT_CR_TB BIT(3) /* transfer byte bit */
> +/* Bits 4-7 are reserved */
> +#define SPACEMIT_CR_MODE_FAST BIT(8) /* bus mode (master operation) */
> +/* Bit 9 is reserved */
> +#define SPACEMIT_CR_UR BIT(10) /* unit reset */
> +/* Bits 11-12 are reserved */
> +#define SPACEMIT_CR_SCLE BIT(13) /* master clock enable */
> +#define SPACEMIT_CR_IUE BIT(14) /* unit enable */
> +/* Bits 15-17 are reserved */
> +#define SPACEMIT_CR_ALDIE BIT(18) /* enable arbitration interrupt */
> +#define SPACEMIT_CR_DTEIE BIT(19) /* enable tx interrupts */
> +#define SPACEMIT_CR_DRFIE BIT(20) /* enable rx interrupts */
> +#define SPACEMIT_CR_GCD BIT(21) /* general call disable */
> +#define SPACEMIT_CR_BEIE BIT(22) /* enable bus error ints */
> +/* Bits 23-24 are reserved */
> +#define SPACEMIT_CR_MSDIE BIT(25) /* master STOP detected int enable */
> +#define SPACEMIT_CR_MSDE BIT(26) /* master STOP detected enable */
> +#define SPACEMIT_CR_TXDONEIE BIT(27) /* transaction done int enable */
> +#define SPACEMIT_CR_TXEIE BIT(28) /* transmit FIFO empty int enable */
> +#define SPACEMIT_CR_RXHFIE BIT(29) /* receive FIFO half-full int enable */
> +#define SPACEMIT_CR_RXFIE BIT(30) /* receive FIFO full int enable */
> +#define SPACEMIT_CR_RXOVIE BIT(31) /* receive FIFO overrun int enable */
> +
> +#define SPACEMIT_I2C_INT_CTRL_MASK (SPACEMIT_CR_ALDIE | SPACEMIT_CR_DTEIE | \
> + SPACEMIT_CR_DRFIE | SPACEMIT_CR_BEIE | \
> + SPACEMIT_CR_TXDONEIE | SPACEMIT_CR_TXEIE | \
> + SPACEMIT_CR_RXHFIE | SPACEMIT_CR_RXFIE | \
> + SPACEMIT_CR_RXOVIE | SPACEMIT_CR_MSDIE)
> +
> +/* SPACEMIT_ISR register fields */
> +/* Bits 0-13 are reserved */
> +#define SPACEMIT_SR_ACKNAK BIT(14) /* ACK/NACK status */
> +#define SPACEMIT_SR_UB BIT(15) /* unit busy */
> +#define SPACEMIT_SR_IBB BIT(16) /* i2c bus busy */
> +#define SPACEMIT_SR_EBB BIT(17) /* early bus busy */
> +#define SPACEMIT_SR_ALD BIT(18) /* arbitration loss detected */
> +#define SPACEMIT_SR_ITE BIT(19) /* tx buffer empty */
> +#define SPACEMIT_SR_IRF BIT(20) /* rx buffer full */
> +#define SPACEMIT_SR_GCAD BIT(21) /* general call address detected */
> +#define SPACEMIT_SR_BED BIT(22) /* bus error no ACK/NAK */
> +#define SPACEMIT_SR_SAD BIT(23) /* slave address detected */
> +#define SPACEMIT_SR_SSD BIT(24) /* slave stop detected */
> +/* Bit 25 is reserved */
> +#define SPACEMIT_SR_MSD BIT(26) /* master stop detected */
> +#define SPACEMIT_SR_TXDONE BIT(27) /* transaction done */
> +#define SPACEMIT_SR_TXE BIT(28) /* tx FIFO empty */
> +#define SPACEMIT_SR_RXHF BIT(29) /* rx FIFO half-full */
> +#define SPACEMIT_SR_RXF BIT(30) /* rx FIFO full */
> +#define SPACEMIT_SR_RXOV BIT(31) /* RX FIFO overrun */

s/RX FIFO/rx FIFO/

Or preferably, use "TX" and "RX" an all the comments (and anywhere
else you use "tx" and "rx" in the file).

> +
> +#define SPACEMIT_I2C_INT_STATUS_MASK (SPACEMIT_SR_RXOV | SPACEMIT_SR_RXF | SPACEMIT_SR_RXHF | \
> + SPACEMIT_SR_TXE | SPACEMIT_SR_TXDONE | SPACEMIT_SR_MSD | \
> + SPACEMIT_SR_SSD | SPACEMIT_SR_SAD | SPACEMIT_SR_BED | \
> + SPACEMIT_SR_GCAD | SPACEMIT_SR_IRF | SPACEMIT_SR_ITE | \
> + SPACEMIT_SR_ALD)
> +
> +/* SPACEMIT_IBMR register fields */
> +#define SPACEMIT_BMR_SDA BIT(0) /* SDA line level */
> +#define SPACEMIT_BMR_SCL BIT(1) /* SCL line level */
> +
> +/* i2c bus recover timeout: us */
> +#define SPACEMIT_I2C_BUS_BUSY_TIMEOUT 100000

Align the 100000 above with the frequency values below.

> +
> +#define SPACEMIT_SR_ERR (SPACEMIT_SR_BED | SPACEMIT_SR_RXOV | SPACEMIT_SR_ALD)
> +

Maybe it's obvious but you could comment that the unit
for these values is Hz.

> +#define SPACEMIT_I2C_MAX_STANDARD_MODE_FREQ 100000
> +#define SPACEMIT_I2C_MAX_FAST_MODE_FREQ 400000
> +
> +enum spacemit_i2c_state {
> + STATE_IDLE,
> + STATE_START,
> + STATE_READ,
> + STATE_WRITE,
> +};
> +
> +/* i2c-spacemit driver's main struct */
> +struct spacemit_i2c_dev {
> + struct device *dev;
> + struct i2c_adapter adapt;
> +
> + /* hardware resources */
> + void __iomem *base;
> + int irq;
> + u32 clock_freq;
> +
> + struct i2c_msg *msgs;
> + int msg_num;

You'll never have a negative number of messages. (I see
it's assigned an int value, but my statement is still true.)
So this can be unsigned (u32).

> +
> + /* index of the current message being processed */
> + int msg_idx;

msg_idx can also be unsigned.

> + u8 *msg_buf;
> + /* the number of unprocessed bytes remaining in each message */

s/each/the current/

> + size_t unprocessed;

Why is unprocessed a size_t? It's OK, but msg_idx is a
simple (unsigned) int.

> +
> + enum spacemit_i2c_state state;
> + bool read;
> + struct completion complete;
> + u32 status;
> +};
> +
> +static void spacemit_i2c_enable(struct spacemit_i2c_dev *i2c)
> +{
> + u32 val;
> +
> + val = readl(i2c->base + SPACEMIT_ICR);
> + val |= SPACEMIT_CR_IUE;
> + writel(val, i2c->base + SPACEMIT_ICR);
> +}
> +
> +static void spacemit_i2c_disable(struct spacemit_i2c_dev *i2c)
> +{
> + u32 val;
> +
> + val = readl(i2c->base + SPACEMIT_ICR);
> + val &= ~SPACEMIT_CR_IUE;
> + writel(val, i2c->base + SPACEMIT_ICR);
> +}
> +
> +static void spacemit_i2c_reset(struct spacemit_i2c_dev *i2c)
> +{
> + writel(SPACEMIT_CR_UR, i2c->base + SPACEMIT_ICR);
> + udelay(5);
> + writel(0, i2c->base + SPACEMIT_ICR);
> +}
> +
> +static int spacemit_i2c_handle_err(struct spacemit_i2c_dev *i2c)
> +{
> + dev_dbg(i2c->dev, "i2c error status: 0x%08x\n", i2c->status);
> +
> + if (i2c->status & (SPACEMIT_SR_BED | SPACEMIT_SR_ALD)) {
> + spacemit_i2c_reset(i2c);
> + return -EAGAIN;
> + }
> +
> + return i2c->status & SPACEMIT_SR_ACKNAK ? -ENXIO : -EIO;
> +}
> +
> +static void spacemit_i2c_conditionally_reset_bus(struct spacemit_i2c_dev *i2c)
> +{
> + u32 status;
> +
> + /* if bus is locked, reset unit. 0: locked */
> + status = readl(i2c->base + SPACEMIT_IBMR);
> + if ((status & SPACEMIT_BMR_SDA) && (status & SPACEMIT_BMR_SCL))
> + return;
> +
> + spacemit_i2c_reset(i2c);
> + usleep_range(10, 20);
> +
> + /* check scl status again */
> + status = readl(i2c->base + SPACEMIT_IBMR);
> + if (!(status & SPACEMIT_BMR_SCL))
> + dev_warn_ratelimited(i2c->dev, "unit reset failed\n");
> +}
> +

I think this is waiting for the bus to *not* be busy.
So spacemit_i2c_wait_bus_free() (or maybe _idle()) would
make more sense.

> +static int spacemit_i2c_wait_bus_busy(struct spacemit_i2c_dev *i2c)
> +{
> + int ret;
> + u32 val;
> +
> + val = readl(i2c->base + SPACEMIT_ISR);
> + if (!(val & (SPACEMIT_SR_UB | SPACEMIT_SR_IBB)))
> + return 0;
> +
> + ret = readl_poll_timeout(i2c->base + SPACEMIT_ISR,
> + val, !(val & (SPACEMIT_SR_UB | SPACEMIT_SR_IBB)),
> + 1500, SPACEMIT_I2C_BUS_BUSY_TIMEOUT);
> + if (ret)
> + spacemit_i2c_reset(i2c);
> +
> + return ret;
> +}
> +
> +static void spacemit_i2c_check_bus_release(struct spacemit_i2c_dev *i2c)
> +{
> + /* in case bus is not released after transfer completes */
> + if (readl(i2c->base + SPACEMIT_ISR) & SPACEMIT_SR_EBB) {
> + spacemit_i2c_conditionally_reset_bus(i2c);
> + usleep_range(90, 150);
> + }
> +}
> +
> +static void spacemit_i2c_init(struct spacemit_i2c_dev *i2c)
> +{
> + u32 val;
> +
> + /*
> + * Unmask interrupt bits for all xfer mode:
> + * bus error, arbitration loss detected.
> + * For transaction complete signal, we use master stop
> + * interrupt, so we don't need to unmask SPACEMIT_CR_TXDONEIE.
> + */
> + val = SPACEMIT_CR_BEIE | SPACEMIT_CR_ALDIE;
> +
> + /*
> + * Unmask interrupt bits for interrupt xfer mode:
> + * DBR rx full.
> + * For tx empty interrupt SPACEMIT_CR_DTEIE, we only
> + * need to enable when trigger byte transfer to start
> + * data sending.
> + */
> + val |= SPACEMIT_CR_DRFIE;
> +
> + if (i2c->clock_freq == SPACEMIT_I2C_MAX_FAST_MODE_FREQ)
> + val |= SPACEMIT_CR_MODE_FAST;
> +
> + /* disable response to general call */
> + val |= SPACEMIT_CR_GCD;
> +
> + /* enable SCL clock output */
> + val |= SPACEMIT_CR_SCLE;
> +
> + /* enable master stop detected */
> + val |= SPACEMIT_CR_MSDE | SPACEMIT_CR_MSDIE;
> +
> + writel(val, i2c->base + SPACEMIT_ICR);
> +}
> +
> +static inline void

s/inline //

> +spacemit_i2c_clear_int_status(struct spacemit_i2c_dev *i2c, u32 mask)
> +{
> + writel(mask & SPACEMIT_I2C_INT_STATUS_MASK, i2c->base + SPACEMIT_ISR);
> +}
> +
> +static void spacemit_i2c_start(struct spacemit_i2c_dev *i2c)
> +{
> + u32 slave_addr_rw, val;
> + struct i2c_msg *cur_msg = i2c->msgs + i2c->msg_idx;
> +
> + i2c->read = !!(cur_msg->flags & I2C_M_RD);
> +
> + i2c->state = STATE_START;
> +
> + slave_addr_rw = (cur_msg->addr & 0x7f) << 1;
> + if (cur_msg->flags & I2C_M_RD)
> + slave_addr_rw |= 1;
> +
> + writel(slave_addr_rw, i2c->base + SPACEMIT_IDBR);
> +
> + /* send start pulse */
> + val = readl(i2c->base + SPACEMIT_ICR);
> + val &= ~SPACEMIT_CR_STOP;
> + val |= SPACEMIT_CR_START | SPACEMIT_CR_TB | SPACEMIT_CR_DTEIE;
> + writel(val, i2c->base + SPACEMIT_ICR);
> +}
> +
> +static void spacemit_i2c_stop(struct spacemit_i2c_dev *i2c)
> +{
> + u32 val;
> +
> + val = readl(i2c->base + SPACEMIT_ICR);
> + val |= SPACEMIT_CR_STOP | SPACEMIT_CR_ALDIE | SPACEMIT_CR_TB;
> +
> + if (i2c->read)
> + val |= SPACEMIT_CR_ACKNAK;
> +
> + writel(val, i2c->base + SPACEMIT_ICR);
> +}
> +
> +static int spacemit_i2c_xfer_msg(struct spacemit_i2c_dev *i2c)
> +{
> + unsigned long time_left;
> +
> + for (i2c->msg_idx = 0; i2c->msg_idx < i2c->msg_num; i2c->msg_idx++) {
> + i2c->msg_buf = (i2c->msgs + i2c->msg_idx)->buf;
> + i2c->status = 0;
> + i2c->unprocessed = (i2c->msgs + i2c->msg_idx)->len;

I think this might be more understandable. The array syntax
shows it's really an array; and the local variable simplifies
the right-hand sides.

struct i2c_msg *msg = &i2c->msgs[i2c->msg_idx];

i2c->msg_buf = msg->buf;
i2c->unprocessed = msg->len;
i2c->status = 0;

> +
> + reinit_completion(&i2c->complete);
> +
> + spacemit_i2c_start(i2c);
> +
> + time_left = wait_for_completion_timeout(&i2c->complete,
> + i2c->adapt.timeout);
> + if (time_left == 0) {

if (!time_left) {

> + dev_err(i2c->dev, "msg completion timeout\n");
> + spacemit_i2c_conditionally_reset_bus(i2c);
> + spacemit_i2c_reset(i2c);
> + return -ETIMEDOUT;
> + }
> +
> + if (i2c->status & SPACEMIT_SR_ERR)
> + return spacemit_i2c_handle_err(i2c);
> + }
> +
> + return 0;
> +}

. . .

> +static void spacemit_i2c_calc_timeout(struct spacemit_i2c_dev *i2c)
> +{
> + unsigned long timeout;
> + int idx = 0, cnt = 0;
> +
> + while (idx < i2c->msg_num) {
> + cnt += (i2c->msgs + idx)->len + 1;
> + idx++;
> + }
> +
> + /*
> + * multiply by 9 because each byte in I2C transmission requires
> + * 9 clock cycles: 8 bits of data plus 1 ACK/NACK bit.
> + */
> + timeout = cnt * 9 * USEC_PER_SEC / i2c->clock_freq;
> +
> + i2c->adapt.timeout = usecs_to_jiffies(timeout + USEC_PER_SEC / 2) / i2c->msg_num;

I think the half second pad on your timeout will essentially
always dominate the timeout period. If you transfer a
maximally-sized message at 100000 Hz it'll take almost
6 seconds. But in practice I'm sure transfers are under
32 bytes (maybe 256?). At 256 bytes you're looking at
23 milliseconds (plus 500000) at 100 KHz.

I looked around and the timeouts used for I2C adapters are
all over the map. 50 seconds, 1 second, 100 milliseconds,
and so on, so I guess what you're doing is fine.

That said, it might not be very important to be as precise
as you are here.

> +}
> +

. . .

> +static const struct i2c_algorithm spacemit_i2c_algo = {
> + .xfer = spacemit_i2c_xfer,
> + .functionality = spacemit_i2c_func,
> +};
> +
> +static int spacemit_i2c_probe(struct platform_device *pdev)
> +{
> + struct clk *clk;
> + struct device *dev = &pdev->dev;
> + struct device_node *of_node = pdev->dev.of_node;
> + struct spacemit_i2c_dev *i2c;
> + int ret;
> +
> + i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
> + if (!i2c)
> + return -ENOMEM;
> +
> + ret = of_property_read_u32(of_node, "clock-frequency", &i2c->clock_freq);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to read clock-frequency property");

Your binding doesn't say that the "clock-frequency" property is
required. If it's not found, you should default to 400000 Hz.
There should be no error here.

> +
> + /* For now, this driver doesn't support high-speed. */

The clock frequency is unsigned, so:

if (!i2c->clock_freq || ...) {

> + if (i2c->clock_freq < 1 || i2c->clock_freq > SPACEMIT_I2C_MAX_FAST_MODE_FREQ) {
> + dev_warn(dev, "unsupport clock frequency: %d, default: %d",

dev_warn(dev, "unsupported clock frequency %u; using %u\n",

> + i2c->clock_freq, SPACEMIT_I2C_MAX_FAST_MODE_FREQ);
> + i2c->clock_freq = SPACEMIT_I2C_MAX_FAST_MODE_FREQ;
> + } else if (i2c->clock_freq < SPACEMIT_I2C_MAX_STANDARD_MODE_FREQ) {

I would issue the same warning message here.

> + i2c->clock_freq = SPACEMIT_I2C_MAX_STANDARD_MODE_FREQ;
> + }
> +
> + i2c->dev = &pdev->dev;
> +
> + i2c->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(i2c->base))
> + return dev_err_probe(dev, PTR_ERR(i2c->base), "failed to do ioremap");
> +
> + i2c->irq = platform_get_irq(pdev, 0);
> + if (i2c->irq < 0)
> + return dev_err_probe(dev, i2c->irq, "failed to get irq resource");
> +
> + ret = devm_request_irq(i2c->dev, i2c->irq, spacemit_i2c_irq_handler,
> + IRQF_NO_SUSPEND | IRQF_ONESHOT, dev_name(i2c->dev), i2c);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to request irq");
> +
> + clk = devm_clk_get_enabled(dev, "func");
> + if (IS_ERR(clk))
> + return dev_err_probe(dev, PTR_ERR(clk), "failed to enable func clock");
> +
> + clk = devm_clk_get_enabled(dev, "bus");
> + if (IS_ERR(clk))
> + return dev_err_probe(dev, PTR_ERR(clk), "failed to enable bus clock");
> +
> + spacemit_i2c_reset(i2c);
> +
> + i2c_set_adapdata(&i2c->adapt, i2c);
> + i2c->adapt.owner = THIS_MODULE;
> + i2c->adapt.algo = &spacemit_i2c_algo;
> + i2c->adapt.dev.parent = i2c->dev;
> + i2c->adapt.nr = pdev->id;
> +
> + i2c->adapt.dev.of_node = of_node;
> + i2c->adapt.algo_data = i2c;

I don't think you ever use i2c->adapt.algo_data. All you
need is the i2c pointer you set with i2c_set_adapdata().

That's it!

-Alex

> +
> + strscpy(i2c->adapt.name, "spacemit-i2c-adapter", sizeof(i2c->adapt.name));
> +
> + init_completion(&i2c->complete);
> +
> + platform_set_drvdata(pdev, i2c);
> +
> + ret = i2c_add_numbered_adapter(&i2c->adapt);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "failed to add i2c adapter");
> +
> + return 0;
> +}
> +
> +static void spacemit_i2c_remove(struct platform_device *pdev)
> +{
> + struct spacemit_i2c_dev *i2c = platform_get_drvdata(pdev);
> +
> + i2c_del_adapter(&i2c->adapt);
> +}
> +
> +static const struct of_device_id spacemit_i2c_of_match[] = {
> + { .compatible = "spacemit,k1-i2c", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, spacemit_i2c_of_match);
> +
> +static struct platform_driver spacemit_i2c_driver = {
> + .probe = spacemit_i2c_probe,
> + .remove = spacemit_i2c_remove,
> + .driver = {
> + .name = "i2c-k1",
> + .of_match_table = spacemit_i2c_of_match,
> + },
> +};
> +module_platform_driver(spacemit_i2c_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("I2C bus driver for SpacemiT K1 SoC");
>