[PATCH v2 3/6] i2c: pasemi: Improve timeout handling

[Sven Peter via B4 Relay <devnull+sven.svenpeter.dev@kernel.org>]

From: Sven Peter <sven@svenpeter.dev>

Add proper timeout handling for the interrupt path.
Previously, this was only correctly done for the polling path.
Note that we drop reg_write(smbus, REG_SMSTA, status) here which
will be done anyway whenever the next transaction starts via
pasemi_smb_clear.

Signed-off-by: Sven Peter <sven@svenpeter.dev>
---
 drivers/i2c/busses/i2c-pasemi-core.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c
index df1b0087dcacb0a3b94196368137d5e20b0e6d7e..9b611dbdfef23e78a4ea75ac0311938d52b6ba96 100644
--- a/drivers/i2c/busses/i2c-pasemi-core.c
+++ b/drivers/i2c/busses/i2c-pasemi-core.c
@@ -91,32 +91,42 @@ static void pasemi_smb_clear(struct pasemi_smbus *smbus)
 static int pasemi_smb_waitready(struct pasemi_smbus *smbus)
 {
 	int timeout = 100;
+	int ret;
 	unsigned int status;
 
 	if (smbus->use_irq) {
 		reinit_completion(&smbus->irq_completion);
 		reg_write(smbus, REG_IMASK, SMSTA_XEN | SMSTA_MTN);
-		wait_for_completion_timeout(&smbus->irq_completion, msecs_to_jiffies(100));
+		ret = wait_for_completion_timeout(&smbus->irq_completion, msecs_to_jiffies(100));
 		reg_write(smbus, REG_IMASK, 0);
 		status = reg_read(smbus, REG_SMSTA);
+
+		if (ret < 0) {
+			dev_err(smbus->dev,
+				"Completion wait failed with %d, status 0x%08x\n",
+				ret, status);
+			return ret;
+		} else if (ret == 0) {
+			dev_warn(smbus->dev, "Timeout, status 0x%08x\n", status);
+			return -ETIME;
+		}
 	} else {
 		status = reg_read(smbus, REG_SMSTA);
 		while (!(status & SMSTA_XEN) && timeout--) {
 			msleep(1);
 			status = reg_read(smbus, REG_SMSTA);
 		}
+
+		if (timeout < 0) {
+			dev_warn(smbus->dev, "Timeout, status 0x%08x\n", status);
+			return -ETIME;
+		}
 	}
 
 	/* Got NACK? */
 	if (status & SMSTA_MTN)
 		return -ENXIO;
 
-	if (timeout < 0) {
-		dev_warn(smbus->dev, "Timeout, status 0x%08x\n", status);
-		reg_write(smbus, REG_SMSTA, status);
-		return -ETIME;
-	}
-
 	/* Clear XEN */
 	reg_write(smbus, REG_SMSTA, SMSTA_XEN);
 

-- 
2.34.1