* [PATCH v5 1/3] dt-bindings: i2c: qcom-cci: Document sa8775p compatible
2025-09-11 11:55 [PATCH v5 0/3] Add CCI and imx577 sensor support for LeMans EVK Wenmeng Liu
@ 2025-09-11 11:55 ` Wenmeng Liu
2025-09-11 11:55 ` [PATCH v5 2/3] arm64: dts: qcom: sa8775p: Add CCI definitions Wenmeng Liu
2025-09-11 11:55 ` [PATCH v5 3/3] arm64: dts: qcom: lemans-evk-camera: Add DT overlay Wenmeng Liu
2 siblings, 0 replies; 7+ messages in thread
From: Wenmeng Liu @ 2025-09-11 11:55 UTC (permalink / raw)
To: Loic Poulain, Robert Foss, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson, Konrad Dybcio,
vladimir.zapolskiy, todor.too, bryan.odonoghue
Cc: linux-i2c, linux-arm-msm, devicetree, linux-kernel, linux-media,
Wenmeng Liu
Add the sa8775p CCI device string compatible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <quic_wenmliu@qualcomm.com>
---
Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
index 73144473b9b24e574bfc6bd7d8908f2f3895e087..54441a638da2b7feb44741264810d7a0de319858 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -25,6 +25,7 @@ properties:
- items:
- enum:
+ - qcom,sa8775p-cci
- qcom,sc7280-cci
- qcom,sc8280xp-cci
- qcom,sdm670-cci
@@ -223,6 +224,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,sa8775p-cci
- qcom,sm8550-cci
- qcom,sm8650-cci
- qcom,x1e80100-cci
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v5 2/3] arm64: dts: qcom: sa8775p: Add CCI definitions
2025-09-11 11:55 [PATCH v5 0/3] Add CCI and imx577 sensor support for LeMans EVK Wenmeng Liu
2025-09-11 11:55 ` [PATCH v5 1/3] dt-bindings: i2c: qcom-cci: Document sa8775p compatible Wenmeng Liu
@ 2025-09-11 11:55 ` Wenmeng Liu
2025-09-11 11:55 ` [PATCH v5 3/3] arm64: dts: qcom: lemans-evk-camera: Add DT overlay Wenmeng Liu
2 siblings, 0 replies; 7+ messages in thread
From: Wenmeng Liu @ 2025-09-11 11:55 UTC (permalink / raw)
To: Loic Poulain, Robert Foss, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson, Konrad Dybcio,
vladimir.zapolskiy, todor.too, bryan.odonoghue
Cc: linux-i2c, linux-arm-msm, devicetree, linux-kernel, linux-media,
Konrad Dybcio, Wenmeng Liu
Qualcomm SA8775P SoC contains 4 Camera Control Interface controllers.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@qualcomm.com>
---
arch/arm64/boot/dts/qcom/lemans.dtsi | 268 +++++++++++++++++++++++++++++++++++
1 file changed, 268 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 3246ba05a88cd4979de70e1a3c3db3cd5c894379..f557cf1f2bb54fd8d92e910fb6bfd17f39a1dd4f 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -4358,6 +4358,162 @@ videocc: clock-controller@abf0000 {
#power-domain-cells = <1>;
};
+ cci0: cci@ac13000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac13000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+ pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac14000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac14000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+ pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@ac15000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac15000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_2_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+ pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci3: cci@ac16000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac16000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_3_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci3_0_default &cci3_1_default>;
+ pinctrl-1 = <&cci3_0_sleep &cci3_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci3_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci3_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camss: isp@ac78000 {
compatible = "qcom,sa8775p-camss";
@@ -5201,6 +5357,118 @@ dp1_hot_plug_det: dp1-hot-plug-det-state {
bias-disable;
};
+ cci0_0_default: cci0-0-default-state {
+ pins = "gpio60", "gpio61";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci0_0_sleep: cci0-0-sleep-state {
+ pins = "gpio60", "gpio61";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci0_1_default: cci0-1-default-state {
+ pins = "gpio52", "gpio53";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci0_1_sleep: cci0-1-sleep-state {
+ pins = "gpio52", "gpio53";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci1_0_default: cci1-0-default-state {
+ pins = "gpio62", "gpio63";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci1_0_sleep: cci1-0-sleep-state {
+ pins = "gpio62", "gpio63";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci1_1_default: cci1-1-default-state {
+ pins = "gpio54", "gpio55";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci1_1_sleep: cci1-1-sleep-state {
+ pins = "gpio54", "gpio55";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci2_0_default: cci2-0-default-state {
+ pins = "gpio64", "gpio65";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci2_0_sleep: cci2-0-sleep-state {
+ pins = "gpio64", "gpio65";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci2_1_default: cci2-1-default-state {
+ pins = "gpio56", "gpio57";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci2_1_sleep: cci2-1-sleep-state {
+ pins = "gpio56", "gpio57";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci3_0_default: cci3-0-default-state {
+ pins = "gpio66", "gpio67";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci3_0_sleep: cci3-0-sleep-state {
+ pins = "gpio66", "gpio67";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci3_1_default: cci3-1-default-state {
+ pins = "gpio58", "gpio59";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci3_1_sleep: cci3-1-sleep-state {
+ pins = "gpio58", "gpio59";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
qup_i2c0_default: qup-i2c0-state {
pins = "gpio20", "gpio21";
function = "qup0_se0";
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v5 3/3] arm64: dts: qcom: lemans-evk-camera: Add DT overlay
2025-09-11 11:55 [PATCH v5 0/3] Add CCI and imx577 sensor support for LeMans EVK Wenmeng Liu
2025-09-11 11:55 ` [PATCH v5 1/3] dt-bindings: i2c: qcom-cci: Document sa8775p compatible Wenmeng Liu
2025-09-11 11:55 ` [PATCH v5 2/3] arm64: dts: qcom: sa8775p: Add CCI definitions Wenmeng Liu
@ 2025-09-11 11:55 ` Wenmeng Liu
2025-09-11 12:15 ` Dmitry Baryshkov
2 siblings, 1 reply; 7+ messages in thread
From: Wenmeng Liu @ 2025-09-11 11:55 UTC (permalink / raw)
To: Loic Poulain, Robert Foss, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson, Konrad Dybcio,
vladimir.zapolskiy, todor.too, bryan.odonoghue
Cc: linux-i2c, linux-arm-msm, devicetree, linux-kernel, linux-media,
Konrad Dybcio, Wenmeng Liu
Enable IMX577 via CCI1 on LeMans EVK Core Kit.
The LeMans EVK board does not include a camera sensor
by default, this overlay reflects the possibility of
attaching an optional camera sensor.
For this reason, the camera sensor configuration is
placed in lemans-evk-camera.dtso, rather than
modifying the base lemans-evk.dts.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@qualcomm.com>
---
arch/arm64/boot/dts/qcom/Makefile | 4 +
arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso | 97 +++++++++++++++++++++++++
2 files changed, 101 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0a7c308dec365263bbb7aa5f5cd306dbeacfd3f1..b27f60fbd527146027eebd4bb7b1f8a0a82b3af2 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -30,6 +30,10 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb
dtb-$(CONFIG_ARCH_QCOM) += lemans-evk.dtb
+
+lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..769befadd4e47d25c376dffab3546b78ce656aad
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ vreg_cam1_1p8: regulator-cam1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_cam1";
+ startup-delay-us = <10000>;
+ enable-active-high;
+ gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&camss {
+ vdda-pll-supply = <&vreg_l1c>;
+ vdda-phy-supply = <&vreg_l4a>;
+
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ csiphy1_ep: endpoint {
+ clock-lanes = <7>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&imx577_ep1>;
+ };
+ };
+ };
+};
+
+&cci1 {
+ pinctrl-0 = <&cci1_0_default>;
+ pinctrl-1 = <&cci1_0_sleep>;
+
+ status = "okay";
+};
+
+&cci1_i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx577";
+ reg = <0x1a>;
+
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&cam1_default>;
+ pinctrl-names = "default";
+
+ clocks = <&camcc CAM_CC_MCLK1_CLK>;
+ assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>;
+ assigned-clock-rates = <24000000>;
+
+ dovdd-supply = <&vreg_s4a>;
+ avdd-supply = <&vreg_cam1_1p8>;
+
+ port {
+ imx577_ep1: endpoint {
+ clock-lanes = <7>;
+ link-frequencies = /bits/ 64 <600000000>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&csiphy1_ep>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ cam1_default: cam1-default-state {
+ mclk-pins {
+ pins = "gpio73";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rst-pins {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread