From: Marcus Folkesson <marcus.folkesson@gmail.com>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>,
Peter Rosin <peda@axentia.se>,
Michael Hennerich <michael.hennerich@analog.com>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Andi Shyti <andi.shyti@kernel.org>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Marcus Folkesson <marcus.folkesson@gmail.com>
Subject: [PATCH RFC 2/7] i2c: mux: add idle_state property to i2c_mux_core
Date: Mon, 22 Sep 2025 08:20:57 +0200 [thread overview]
Message-ID: <20250922-i2c-mux-v1-2-28c94a610930@gmail.com> (raw)
In-Reply-To: <20250922-i2c-mux-v1-0-28c94a610930@gmail.com>
Muxes treat their channels differently when idle.
Let the mux core have this information to make it available for
internal use.
Reuse the same state values used by CONFIG_MULTIPLEXER.
Possible idle states are:
- MUX_IDLE_AS_IS: Leave channels as is when idle
- MUX_IDLE_DISCONNECT: Disconnect channel (set HiZ when idle)
- <n>: Enable channel n when idle
Default value is set to MUX_IDLE_AS_IS.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
drivers/i2c/i2c-mux.c | 1 +
include/linux/i2c-mux.h | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+)
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 4d8690981a55dc0e1b35454971923791e6ed9f7f..5caa927c0caae512af029f0d1ae9b7f845ba3f6f 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -250,6 +250,7 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
muxc->select = select;
muxc->deselect = deselect;
muxc->max_adapters = max_adapters;
+ muxc->idle_state = MUX_IDLE_AS_IS;
return muxc;
}
diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
index 1784ac7afb116ce64e9e9fca1ee127c2bbbd2fb9..9e230ad69377b74f9ec809c40ccffd95538c4595 100644
--- a/include/linux/i2c-mux.h
+++ b/include/linux/i2c-mux.h
@@ -13,6 +13,7 @@
#ifdef __KERNEL__
+#include <dt-bindings/mux/mux.h>
#include <linux/bitops.h>
struct i2c_mux_core {
@@ -22,6 +23,12 @@ struct i2c_mux_core {
unsigned int arbitrator:1;
unsigned int gate:1;
+ /*
+ * The mux controller state to use when inactive, or one
+ * of MUX_IDLE_AS_IS and MUX_IDLE_DISCONNECT.
+ */
+ int idle_state;
+
void *priv;
int (*select)(struct i2c_mux_core *, u32 chan_id);
@@ -38,6 +45,20 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
int (*select)(struct i2c_mux_core *, u32),
int (*deselect)(struct i2c_mux_core *, u32));
+/*
+ * Mux drivers may only change idle_state, and may only do so
+ * between allocation and registration of the mux controller.
+ */
+static inline void i2c_mux_set_idle_state(struct i2c_mux_core *muxc, int state)
+{
+ muxc->idle_state = state;
+}
+
+static inline int i2c_mux_idle_state(struct i2c_mux_core *muxc)
+{
+ return muxc->idle_state;
+}
+
/* flags for i2c_mux_alloc */
#define I2C_MUX_LOCKED BIT(0)
#define I2C_MUX_ARBITRATOR BIT(1)
--
2.50.1
next prev parent reply other threads:[~2025-09-22 6:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-22 6:20 [PATCH RFC 0/7] I2C Mux per channel bus speed Marcus Folkesson
2025-09-22 6:20 ` [PATCH RFC 1/7] i2c: core: add callback to change bus frequency Marcus Folkesson
2025-09-22 6:20 ` Marcus Folkesson [this message]
2025-09-22 6:20 ` [PATCH RFC 3/7] i2c: mux: add support for per channel " Marcus Folkesson
2025-09-22 6:20 ` [PATCH RFC 4/7] i2c: mux: ltc4306: set correct idle_state in i2c_mux_core Marcus Folkesson
2025-09-22 6:21 ` [PATCH RFC 5/7] i2c: davinci: calculate bus freq from Hz instead of kHz Marcus Folkesson
2025-09-22 14:42 ` Bartosz Golaszewski
2025-09-22 14:50 ` Marcus Folkesson
2025-09-22 6:21 ` [PATCH RFC 6/7] i2c: davinci: add support for setting bus frequency Marcus Folkesson
2025-09-22 14:43 ` Bartosz Golaszewski
2025-09-22 6:21 ` [PATCH RFC 7/7] docs: i2c: i2c-topology: add section about bus speed Marcus Folkesson
2025-09-23 15:10 ` [PATCH RFC 0/7] I2C Mux per channel " Peter Rosin
2025-09-23 20:37 ` Marcus Folkesson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250922-i2c-mux-v1-2-28c94a610930@gmail.com \
--to=marcus.folkesson@gmail.com \
--cc=andi.shyti@kernel.org \
--cc=brgl@bgdev.pl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.hennerich@analog.com \
--cc=peda@axentia.se \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).