[PATCH 20/44] drivers/i2c/busses: use min() instead of min_t()

[david.laight.linux@gmail.com]

From: David Laight <david.laight.linux@gmail.com>

min_t(u8, a, b) casts both its arguments to u8 potentially discarding
signifinact bits.
Use min(a, b) instead as it cannot discard significant bits.

Detected by an extra check added to min_t().

Signed-off-by: David Laight <david.laight.linux@gmail.com>
---
 drivers/i2c/busses/i2c-designware-master.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 41e9b5ecad20..8fc51d472a55 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -564,7 +564,7 @@ i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
 	 * after receiving the first byte.
 	 */
 	len += (flags & I2C_CLIENT_PEC) ? 2 : 1;
-	dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding);
+	dev->tx_buf_len = len - min(len, dev->rx_outstanding);
 	msgs[dev->msg_read_idx].len = len;
 	msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
 
-- 
2.39.5