[PATCH i2c-tools v3 0/2] Add support for message modifier flags

["Benoît Monin" <benoit.monin@bootlin.com>]

I2C messages can be modified with a set of flags covered by the protocol
mangling and the skip repeated start functionalities. This series add
support for such flags to i2cdetect and i2ctransfer.

The first patch shows the support of protocol mangling and repeated
start skipping in the output of 'i2cdetect -F'.

The second patch adds the parsing of optional flags to i2ctransfer
message description. Those command-line flags then set the i2c message
flags alongside the read/write flag.

I wrote these changes to test the insertion of I2C_M_STOP flag in
multi-message transactions with i2ctransfer, but the other flags may be
useful for various test scenarios. 

Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
---
Changes in v3:
- Use ifdefs to check that the flags and functionalities are known
  at compile-time.
- Check that the adapter supports the requested flags before using them
  in i2ctransfer.
- Add a warning in i2ctransfer man page about the risk of using these
  flags.
- Link to v2: https://lore.kernel.org/r/20251223-msg-flags-v2-0-8d934a4366e2@bootlin.com

Changes in v2:
- Document the flags in i2ctransfer.8 man page.
- Link to v1: https://lore.kernel.org/r/20251128-msg-flags-v1-0-6353f26fa6bc@bootlin.com

---
Benoît Monin (2):
      i2cdetect: Display mangling and nostart support
      i2ctransfer: Add optional message modifier flags

 tools/i2cdetect.c   |   8 ++++
 tools/i2ctransfer.8 |  28 ++++++++++++-
 tools/i2ctransfer.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++------
 3 files changed, 141 insertions(+), 14 deletions(-)
---
base-commit: c1b0305972e89aae048068a3b228f35ef0206243
change-id: 20251127-msg-flags-3d2b2da9ae28

Best regards,
-- 
Benoît Monin, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com