public inbox for linux-i2c@vger.kernel.org
 help / color / mirror / Atom feed
From: Rustam Adilov <adilov@disroot.org>
To: Chris Packham <chris.packham@alliedtelesis.co.nz>,
	Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Rustam Adilov <adilov@disroot.org>
Subject: [PATCH 5/8] i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
Date: Sat, 14 Mar 2026 13:26:25 +0500	[thread overview]
Message-ID: <20260314082628.25206-6-adilov@disroot.org> (raw)
In-Reply-To: <20260314082628.25206-1-adilov@disroot.org>

In RTL9607C i2c controller, there is 10 bit CLK_DIV field for
setting the clock of i2c interface which depends on the rate
of i2c clk (which seems be fixed to 62.5MHz according to Realtek SDK).

Introduce the clk struct and the respective F_CLK_DIV and clk_div
which are going to be used in the upcoming patch for rtl9607c i2c
controller support addition.

devm_clk_get_optional_enabled() function was used for cleaner code
as it automatically returns NULL if the clk is not present, which is
going to be the case for RTL9300 and RTL9310 i2c controllers.

Signed-off-by: Rustam Adilov <adilov@disroot.org>
---
 drivers/i2c/busses/i2c-rtl9300.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/i2c/busses/i2c-rtl9300.c b/drivers/i2c/busses/i2c-rtl9300.c
index 86a82f2c3ce0..4953223ec97c 100644
--- a/drivers/i2c/busses/i2c-rtl9300.c
+++ b/drivers/i2c/busses/i2c-rtl9300.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include <linux/bits.h>
+#include <linux/clk.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
 #include <linux/mod_devicetable.h>
@@ -22,6 +23,7 @@ struct rtl9300_i2c_chan {
 	struct rtl9300_i2c *i2c;
 	enum rtl9300_bus_freq bus_freq;
 	u8 sda_num;
+	u32 clk_div;
 };
 
 enum rtl9300_i2c_reg_scope {
@@ -48,6 +50,7 @@ enum rtl9300_i2c_reg_fields {
 	F_SDA_OUT_SEL,
 	F_SDA_SEL,
 	F_BUSY,
+	F_CLK_DIV,
 
 	/* keep last */
 	F_NUM_FIELDS
@@ -79,6 +82,7 @@ struct rtl9300_i2c {
 	u8 scl_num;
 	u8 sda_num;
 	struct mutex lock;
+	struct clk *clk;
 };
 
 DEFINE_GUARD(rtl9300_i2c, struct rtl9300_i2c *, mutex_lock(&_T->lock), mutex_unlock(&_T->lock))
@@ -426,6 +430,10 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	i2c->clk = devm_clk_get_optional_enabled(dev, NULL);
+	if (IS_ERR(i2c->clk))
+		return dev_err_probe(dev, PTR_ERR(i2c->clk), "Failed to enable i2c clock\n");
+
 	i = 0;
 	for_each_child_of_node_scoped(dev->of_node, child) {
 		struct rtl9300_i2c_chan *chan = &i2c->chans[i];
-- 
2.53.0


  parent reply	other threads:[~2026-03-14  8:27 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-14  8:26 [PATCH 0/8] i2c: rtl9300: support for RTL9607C I2C controller Rustam Adilov
2026-03-14  8:26 ` [PATCH 1/8] i2c: rtl9300: split data_reg into read and write reg Rustam Adilov
2026-03-14  8:26 ` [PATCH 2/8] i2c: rtl9300: introduce max length property to driver data Rustam Adilov
2026-03-14  8:26 ` [PATCH 3/8] i2c: rtl9300: introduce F_BUSY to the reg_fields struct Rustam Adilov
2026-03-14  8:26 ` [PATCH 4/8] i2c: rtl9300: introduce a property for 8 bit width reg address Rustam Adilov
2026-03-15 21:26   ` Chris Packham
2026-03-15 21:31   ` Chris Packham
2026-03-16 16:28     ` Rustam Adilov
2026-03-16 20:24       ` Chris Packham
2026-03-14  8:26 ` Rustam Adilov [this message]
2026-03-14  8:26 ` [PATCH 6/8] i2c: rtl9300: intoduce new function properties to driver data Rustam Adilov
2026-03-15 21:36   ` Chris Packham
2026-03-16 16:42     ` Rustam Adilov
2026-03-14  8:26 ` [PATCH 7/8] dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9607C support Rustam Adilov
2026-03-15  8:56   ` Krzysztof Kozlowski
2026-03-15 10:10     ` Rustam Adilov
2026-03-15 10:15       ` Krzysztof Kozlowski
2026-03-15 16:18         ` Rustam Adilov
2026-03-14  8:26 ` [PATCH 8/8] i2c: rtl9300: add RTL9607C i2c controller support Rustam Adilov
2026-03-15 21:45 ` [PATCH 0/8] i2c: rtl9300: support for RTL9607C I2C controller Chris Packham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260314082628.25206-6-adilov@disroot.org \
    --to=adilov@disroot.org \
    --cc=andi.shyti@kernel.org \
    --cc=chris.packham@alliedtelesis.co.nz \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox