From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.remote-ip=209.85.221.50 ARC-Seal: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=none; t=1794697724; b=1rydeOBb+5N5WNTclCRAwPH/Hp8P9lZusfozYA3vmi/IErvLzribBEC3ttetyEPhiZqo oCWAj8unRQSRVr7xuSsT3qvbYp20lAvaQ9xfdsG5kRoI70/FOcVX5e1cdbpOJnu1jcOrB JoOYZbB0XlkaDLYYpbzWGA6r+OaAMXjXXJ1wqy9eibx4CC2/31GF5/lbbAOxnyyFPGQ+D 0eGa5MxmS5iYiAYKWSK9+G/8YT7IEiLjAxNOASRr/Gks7xbKaUKMbK+SXTxvhk6U3oEUk 5bz3un82uWc25C3e1Vkiomn8IAvF4URfFnpKqaexDwA84vjuoHxgICgB0jK5iYqtOzQ== ARC-Message-Signature: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1794697724; h=DMARC-Filter:Received:DKIM-Signature:X-Google-DKIM-Signature: X-Forwarded-Encrypted:X-Gm-Message-State:X-Gm-Gg:X-Received:Received: From:To:Cc:Subject:Date:Message-ID:X-Mailer:In-Reply-To:References: MIME-Version:Content-Transfer-Encoding; bh=JLvJHlJfeScNlcpPSvtEUe1uRcaagWsVvGbZJ4zel+M=; b=2Ab/PNf2WAvH+/nQkp4H1KJg/sGsWwAi76p0uV22iHvALfs+bYDl8Oi2xJfuRQD79iyf C8Qu7czy1phI3zBK8pZMcZybRxtBjUPHjBjCYliX7Wrav1XF00hPRbqWtNJ18jDhse3Cr sRSxeboZnATGbVc3HaJWvsO8i7cNfy3ozMjvcTwJinwZ/WZ9s329oddR//FpDKL4uclJx zC6iWtO63ZbN+8jy26+qgddIwwtnCuBK9sDHjECOtZJGgXB5x7Zy9u3ip8qDCmlPjnMip rBa0Kt5hsgGjqZTcMgdGU/WkZtKYaaKMdwjHfdgdSAEyXh8UxkBDjaVpb8ynCe8u66g== ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20260707 header.b=nYTO+cjn; arc=none smtp.remote-ip=209.85.221.50 Received: from mail-wr1-f50.google.com (mail-wr1-f50.google.com [209.85.221.50]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 4FB1A60A3827 for ; Sat, 14 Nov 2026 23:08:44 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org 4FB1A60A3827 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20260707 header.b=nYTO+cjn Received: by mail-wr1-f50.google.com with SMTP id ffacd0b85a97d-48e10a70540so1130645f8f.1 for ; Sat, 14 Nov 2026 15:08:44 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20260707; t=1794697723; x=1795302523; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=JLvJHlJfeScNlcpPSvtEUe1uRcaagWsVvGbZJ4zel+M=; b=nYTO+cjn6IYSwqypc2xC8sK0+w6AFP35t9ZaRRMbtZvGkHzpf73l8bxL3pdJMhLhpG FleA9hTBT/eSWzr6jIvSvWwn0NmsfdiOFQGmSYiGCz3WGnn+mbvaLp7Q4jfgIW8DxwTN eWG7lD5GK8DC0AxyN9zOJ8YlVOh+yDpgv5YzN0ZTdMvdP5rEWTHDJm0yinoSJb2FCIaa y5fxoZ/R8gDMJUDy5hSoBXwfO7Q5HGwGs8Sik0MbOGNi7EJLvh0IWWBz4C85e2jhnziJ mnDtkk6AKvg1GMeruqnjsN3l6vTkvCOwEUmCGanAAdyDKrf9cErGTM5x2WEjLmPrPLSr 8ltw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1794697723; x=1795302523; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=JLvJHlJfeScNlcpPSvtEUe1uRcaagWsVvGbZJ4zel+M=; b=X1YY3T2bGaoKxilBJJMhHzT36sBFRokdWMcBjkTabAg/k0wemVU+lkgxa1rSw9sV2+ psUthoj3NiuNDtH4JW1WyI1AlHFmbtY1NWcU9oeKB3tHTwR/RnZBUThfQg9eC8pMtgzw ZbtEvs8IsNIen0jhMn+MKMgojWs1vDwANT1I1ESmcaGMY2FpC+6e1g/1tPQkLMoFaUty nof+HDfviIOx9wFTLF2a4lw90J9PB6MoeY7w7xEgTzZr58b/x64Do0cCPQh5UsX34jXQ m7/sj1BeityE6BO+R6hCHCyZL+qWzcQA0CKmRy/cdOEaR+XpYAoRBGPNCfBgWv2oZ3gx JuKw== X-Forwarded-Encrypted: i=1; AL+hErFm0Cp3AgE0VGp9XrwGl7g9d4TaIQOZn7UX8IyVBFeXEBsIHPoJwf6qAMD+KfML9c6IhUeIvWgOApQ=@vger.kernel.org X-Gm-Message-State: APuU4Z+z+FnHxx9v8lxZeVrkxxgy529ePknpou4YQTSAtB1HM2fF+AFn VjyQbNq0KPa5CmRAODWGV9bDK419srityAGiDy9htatsXWQTlh2gnF6T X-Gm-Gg: AYBFou2jPzHP/Tq6WcOH/MlI454yhCBnEZQNBx2YFyUhcIHTfh+OMFS1jXJW5d5LQGb aogHgyVTRDk1HZh3V8RubwDtsJOHRFSxqrYv4LVNMsJ+a3xqmOGJmP/1eamS0zGAFhr76OmwkAx vtsfrwkmFh/I2TXQgjRskkJh8S1UoK0zCgnPAum49qllI40s4ZQQSo1TOeGEWF8BeI9B8RG92EN FYsRE27NhYZ59iiFsdt32ydSbfV1YCHQPcPyhpDOCsMXZaJRbCEEXK2QbrfqQAjYD7PG8c47kbM t9DDJklRaCNDH1L3C3BJceggQ1a3PN4yROowN5THcHXOw0QekIkIKZxwboYgkZWz7aciRgSzVZ/ ziqE4HZWA5VTd8TsH1j9FyllCHERG52vd0HU4evwRcCkFw9AGWQ3jLBAvye63TsAZ2fi1Sdbkyv rvh+5W5g85UVilILQCcy4x62UWleazSH3yTl150trmpShP6/TTVBdwNZsi3SzK+mpdIHT5BEsqp lb70Qk6WEioo+cjLACKl1BS2Cc1o75XM3jttgLCX6bEIL6Mnc5Bfi4Gl/aXSXaXu/ecnFIn8IYK /70S1pIfJ/zG9GtkUzBqGR9GT86l X-Received: by 2002:a05:6000:178e:b0:490:ae2:b841 with SMTP id ffacd0b85a97d-49c73a05d9amr13948843f8f.30.1794697722659; Sat, 14 Nov 2026 15:08:42 -0800 (PST) Received: from m2.. ([37.142.149.161]) by smtp.googlemail.com with ESMTPSA id ffacd0b85a97d-49c5d03b10fsm14910018f8f.1.2026.11.14.15.08.40 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 14 Nov 2026 15:08:42 -0800 (PST) From: Michael Zaidman To: Jiri Kosina , Benjamin Tissoires Cc: Linus Walleij , Bartosz Golaszewski , Greg Kroah-Hartman , Jiri Slaby , Raman Varabets , Germain Hebert , Christina Quast , Rio Liu , Bruno Giacomazzi , linux-input@vger.kernel.org, linux-serial@vger.kernel.org, linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, Michael Zaidman Subject: [PATCH v3 08/16] HID: ft260: uart: add modem pins control via ioctl Date: Sun, 15 Nov 2026 01:07:52 +0200 Message-ID: <20261114230800.1344401-9-michael.zaidman@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20261114230800.1344401-1-michael.zaidman@gmail.com> References: <20261114230800.1344401-1-michael.zaidman@gmail.com> X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add TIOCMGET/TIOCMSET (and thus TIOCMBIS/TIOCMBIC) support so userspace can drive DTR/RTS when the modem pins are in GPIO mode. This enables programming an ESP32 over the FT260 with esptool, which resets the chip via those lines. Set up the gpiochip and the sysfs attributes on the UART interface when the chip mode has UART, and on the I2C interface only in the I2C-only mode. Before, the choice depended on USB interface number 0, which is the I2C interface in mode 3, but TIOCMGET and TIOCMSET run on the UART interface and need the GPIO state there. Add DCD and RI (GPIO4 and GPIO5) to the GPIO set of UART modes 3 and 4, so the mask that TIOCMGET and TIOCMSET check covers the two lines that TIOCMGET reports. The RTS, CTS, DTR and DSR pins are active-low, so TIOCMGET inverts the sense of those four lines and TIOCMSET drives 0 to assert them. DCD and RI are not inverted. Rio Liu found and fixed the polarity. Keep the errno from ft260_get_interface_type(), so that a failed status read does not let probe succeed after the teardown. TIOCMGET and TIOCMSET work only while the modem pins are GPIOs, and return -EINVAL otherwise. They check gpio_en under port->lock, so that a termios or sysfs change cannot switch the pins to flow control between the check and the GPIO report. TIOCMGET returns the error of the GPIO read. TIOCMSET builds its report from the cached GPIO state, which it copies under the same lock. The tty hangup does not wait for a TIOCMGET or TIOCMSET that already runs, because the tty core handles them without a line discipline reference. ft260_remove() sets a flag under port->lock after the hangup, so it waits for such a call, and a later one returns -ENODEV instead of using hdev after hid_hw_stop(). Co-developed-by: Rio Liu Signed-off-by: Rio Liu Signed-off-by: Michael Zaidman --- v2: Polarity fix folded in (Rio Liu). Fixes for the issues reported by Sashiko: - The errno of ft260_get_interface_type() is kept, so probe does not succeed after the teardown. - TIOCMGET and TIOCMSET return -EINVAL when the modem pins are not GPIOs, and TIOCMGET returns the error of the GPIO read. - TIOCMSET copies the cached GPIO state under port->lock. v3: Fixes for the issues reported by Sashiko: - gpio_en checked under port->lock in tiocmget() and tiocmset(), so a termios or sysfs change cannot switch the pins between the check and the GPIO report. - tiocmget() and tiocmset() return -ENODEV after ft260_remove(), so they do not use hdev after hid_hw_stop(). - tiocmget() cannot run before dev->gc is set, because ft260_uart_probe() registers the TTY last since patch 2. --- drivers/hid/hid-ft260.c | 168 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 151 insertions(+), 17 deletions(-) diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c index 75ba68e2e8fc..d795355fc26b 100644 --- a/drivers/hid/hid-ft260.c +++ b/drivers/hid/hid-ft260.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -183,7 +184,7 @@ enum { FT260_GPIO_DIR_OUTPUT = 0x01, }; -/* GPIO offsets */ +/* GPIO bit masks */ #define FT260_GPIO_0 BIT(0) #define FT260_GPIO_1 BIT(1) #define FT260_GPIO_2 BIT(2) @@ -213,7 +214,8 @@ enum { #define FT260_GPIO_UART_MODE_1_SET FT260_GPIO_UART_DTR_DSR #define FT260_GPIO_UART_MODE_2_SET FT260_GPIO_UART_RTS_CTS #define FT260_GPIO_UART_MODE_3_SET (FT260_GPIO_UART_RTS_CTS | \ - FT260_GPIO_UART_DTR_DSR) + FT260_GPIO_UART_DTR_DSR | \ + FT260_GPIO_UART_DCD_RI) #define FT260_GPIO_UART_MODE_4_SET FT260_GPIO_UART_MODE_3_SET #define FT260_GPIO_UART_DEFAULT FT260_GPIO_UART_MODE_0_SET #define FT260_GPIO_UART_MODE_1_CLR (FT260_GPIO_UART_RX_TX | \ @@ -223,6 +225,16 @@ enum { #define FT260_GPIO_UART_MODE_3_CLR FT260_GPIO_UART_RX_TX #define FT260_GPIO_UART_MODES 5 +/* UART modem control GPIO offsets */ +enum { + FT260_GPIO_UART_DCD = (4), + FT260_GPIO_UART_RI = (5), + FT260_GPIO_UART_RTS = (7), + FT260_GPIO_UART_CTS = (10), + FT260_GPIO_UART_DTR = (11), + FT260_GPIO_UART_DSR = (13), +}; + #define FT260_SET_REQUEST_VALUE(report_id) ((FT260_FEATURE << 8) | (report_id)) /* Feature In reports */ @@ -449,6 +461,7 @@ MODULE_DEVICE_TABLE(hid, ft260_devices); struct ft260_device { struct i2c_adapter adap; struct hid_device *hdev; + int chip_mode; int iface_type; int iface_id; struct list_head device_list; @@ -480,6 +493,8 @@ struct ft260_device { struct ft260_gpio_state gpio; u16 gpio_uart_mode[FT260_GPIO_UART_MODES]; bool uart_dcd_ri; + /* Set under lock by ft260_remove(); tiocm calls then stop */ + bool removed; }; static int ft260_hid_feature_report_get(struct hid_device *hdev, @@ -1111,8 +1126,27 @@ static void ft260_gpio_en_update(struct hid_device *hdev, u8 req, u8 value) else ft260_gpio_en_clr(dev, bitmap); exit: - ft260_dbg("%s: enabled GPIOs: %04x\n", dev_name(&hdev->dev), - dev->gpio_en); + ft260_dbg("%s: enabled GPIOs: %04x, bitmap %04x\n", + dev_name(&hdev->dev), dev->gpio_en, bitmap); +} + +static void ft260_gpio_output_cfg(struct ft260_gpio_state *gpio, + u32 offset, int value) +{ + if (offset < FT260_GPIO_0_5_COUNT) { + gpio->dirs |= BIT(offset); + if (value) + gpio->vals |= !!value << offset; + else + gpio->vals &= ~BIT(offset); + } else { + offset = offset - FT260_GPIO_0_5_COUNT; + gpio->ex_dirs |= BIT(offset); + if (value) + gpio->ex_vals |= !!value << offset; + else + gpio->ex_vals &= ~BIT(offset); + } } static int ft260_gpio_set(struct gpio_chip *gc, u32 offset, int value) @@ -1161,7 +1195,7 @@ static int ft260_gpio_set(struct gpio_chip *gc, u32 offset, int value) rep.gpio.ex_vals &= ~BIT(offset); } - ft260_dbg("dirs %#02x vals %#02x ex_dir %#02x ex_vals %#02x\n", + ft260_dbg("dirs %#02x vals %#02x ex_dirs %#02x ex_vals %#02x\n", rep.gpio.dirs, rep.gpio.vals, rep.gpio.ex_dirs, rep.gpio.ex_vals); @@ -1419,6 +1453,7 @@ static int ft260_get_interface_type(struct ft260_device *dev, ft260_dbg("wakeup_int: 0x%02x\n", cfg->enable_wakeup_int); dev->power_saving_en = cfg->power_saving_en; + dev->chip_mode = cfg->chip_mode; switch (cfg->chip_mode) { case FT260_MODE_ALL: @@ -1439,7 +1474,6 @@ static int ft260_get_interface_type(struct ft260_device *dev, return -ENODEV; } - dev->iface_type = ret; return ret; } @@ -1947,6 +1981,91 @@ static void ft260_uart_set_termios(struct tty_struct *tty, ft260_uart_change_speed(port, &tty->termios, NULL); } +static int ft260_uart_tiocmget(struct tty_struct *tty) +{ + struct ft260_device *port = tty->driver_data; + int gpios; + + /* + * The modem lines control via ioctl is allowed only + * when the related pins are in the gpio mode. + */ + int mask = FT260_GPIO_UART_MODE_4_SET; + + mutex_lock(&port->lock); + if (port->removed) { + mutex_unlock(&port->lock); + return -ENODEV; + } + if ((port->gpio_en & mask) != mask) { + ft260_dbg("Illegal gpio config %#02x != mask %#04x\n", + port->gpio_en, mask); + mutex_unlock(&port->lock); + return -EINVAL; + } + + gpios = ft260_gpio_get_all(&port->gc, FT260_GPIO_VALUE); + mutex_unlock(&port->lock); + if (gpios < 0) + return gpios; + + return ((!(gpios & FT260_GPIO_B) ? TIOCM_RTS : 0) | + (!(gpios & FT260_GPIO_E) ? TIOCM_CTS : 0) | + (!(gpios & FT260_GPIO_F) ? TIOCM_DTR : 0) | + (!(gpios & FT260_GPIO_H) ? TIOCM_DSR : 0) | + ((gpios & FT260_GPIO_4) ? TIOCM_CAR : 0) | + ((gpios & FT260_GPIO_5) ? TIOCM_RNG : 0)); +} + +static int ft260_uart_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + int ret; + struct ft260_device *port = tty->driver_data; + struct ft260_gpio_write_request_report rep; + struct hid_device *hdev = port->hdev; + int mask = FT260_GPIO_UART_MODE_4_SET; + + mutex_lock(&port->lock); + if (port->removed) { + mutex_unlock(&port->lock); + return -ENODEV; + } + if ((port->gpio_en & mask) != mask) { + ft260_dbg("Illegal gpio config %#02x != mask %#04x\n", + port->gpio_en, mask); + mutex_unlock(&port->lock); + return -EINVAL; + } + rep.report = FT260_GPIO; + rep.gpio = port->gpio; + + if (set & TIOCM_RTS) + ft260_gpio_output_cfg(&rep.gpio, FT260_GPIO_UART_RTS, 0); + if (set & TIOCM_DTR) + ft260_gpio_output_cfg(&rep.gpio, FT260_GPIO_UART_DTR, 0); + if (clear & TIOCM_RTS) + ft260_gpio_output_cfg(&rep.gpio, FT260_GPIO_UART_RTS, 1); + if (clear & TIOCM_DTR) + ft260_gpio_output_cfg(&rep.gpio, FT260_GPIO_UART_DTR, 1); + + ft260_dbg("dirs %#02x vals %#02x ex_dirs %#02x ex_vals %#02x\n", + rep.gpio.dirs, rep.gpio.vals, + rep.gpio.ex_dirs, rep.gpio.ex_vals); + + ret = ft260_hid_feature_report_set(hdev, (u8 *)&rep, sizeof(rep)); + if (unlikely(ret < 0)) { + hid_err(hdev, "%s: cannot set GPIO: %d\n", __func__, ret); + mutex_unlock(&port->lock); + return -EIO; + } + + port->gpio = rep.gpio; + mutex_unlock(&port->lock); + + return 0; +} + static int ft260_uart_install(struct tty_driver *driver, struct tty_struct *tty) { int idx = tty->index; @@ -2027,6 +2146,8 @@ static const struct tty_operations ft260_uart_ops = { .write_room = ft260_uart_write_room, .chars_in_buffer = ft260_uart_chars_in_buffer, .set_termios = ft260_uart_set_termios, + .tiocmget = ft260_uart_tiocmget, + .tiocmset = ft260_uart_tiocmset, .hangup = ft260_uart_hangup, .install = ft260_uart_install, .cleanup = ft260_uart_cleanup, @@ -2171,14 +2292,16 @@ static int ft260_i2c_probe(struct ft260_device *dev, return ret; } - ret = ft260_gpio_init(dev, cfg); - if (ret) - goto err_i2c_free; + if (cfg->chip_mode == FT260_MODE_I2C) { + ret = ft260_gpio_init(dev, cfg); + if (ret) + goto err_i2c_free; - ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group); - if (ret < 0) { - hid_err(hdev, "failed to create sysfs attrs\n"); - goto err_gpio_remove; + ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group); + if (ret < 0) { + hid_err(hdev, "failed to create sysfs attrs\n"); + goto err_gpio_remove; + } } return 0; @@ -2231,7 +2354,8 @@ static int ft260_uart_probe(struct ft260_device *dev, cfg->uart_mode = FT260_UART_CFG_FLOW_CTRL_NONE; - if (dev->iface_id == 0) { + if (dev->chip_mode & FT260_MODE_UART || + dev->chip_mode == FT260_MODE_ALL) { ret = ft260_gpio_init(dev, cfg); if (ret) goto err_hid_report; @@ -2326,8 +2450,9 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id) ret = ft260_get_interface_type(dev, &cfg); if (ret <= FT260_IFACE_NONE) goto err_hid_close; + dev->iface_type = ret; - if (ret == FT260_IFACE_I2C) { + if (dev->iface_type == FT260_IFACE_I2C) { ret = ft260_i2c_probe(dev, &cfg); if (ret) goto err_hid_close; @@ -2366,10 +2491,19 @@ static void ft260_remove(struct hid_device *hdev) tty_port_unregister_device(&dev->port, ft260_tty_driver, dev->index); ft260_uart_port_remove(dev); - if (dev->iface_id == 0) + /* + * The hangup does not wait for a TIOCMGET or TIOCMSET + * that is running; they hold the lock while they use hdev. + */ + mutex_lock(&dev->lock); + dev->removed = true; + mutex_unlock(&dev->lock); + if (dev->chip_mode & FT260_MODE_UART || + dev->chip_mode == FT260_MODE_ALL) sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group); } else { - sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group); + if (dev->chip_mode == FT260_MODE_I2C) + sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group); i2c_del_adapter(&dev->adap); } -- 2.43.0