public inbox for linux-i2c@vger.kernel.org
 help / color / mirror / Atom feed
From: Daniel Smolik <marvin-0pWKB23IDFjrBKCeMvbIDA@public.gmane.org>
To: Eric Brower <ebrower-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Linux I2C <i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org>
Subject: Re: [PATCH] i2c-algo-pcf: Drop unused struct members
Date: Fri, 13 Jun 2008 18:36:09 +0200	[thread overview]
Message-ID: <4852A1F9.7030005@mydatex.cz> (raw)
In-Reply-To: <ec7cefb0806130854y66f93fa8x9b671b539d9b2492-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>

Eric Brower napsal(a):
> On Fri, Jun 13, 2008 at 1:25 AM, Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org> wrote:
>> Struct members udelay and timeout aren't used anywhere, so drop them.
>>
>> Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
>> ---
>> Eric, Daniel, you're using i2c-algo-pcf more than me, can you please
>> check and confirm that this patch is correct? It applies on top of
>> Eric's patch for lost arbitration handling.
>>
>>  drivers/i2c/busses/i2c-elektor.c |    2 --
>>  include/linux/i2c-algo-pcf.h     |    4 ----
>>  2 files changed, 6 deletions(-)
>>
>> --- linux-2.6.26-rc5.orig/drivers/i2c/busses/i2c-elektor.c      2008-06-12 15:22:32.000000000 +0200
>> +++ linux-2.6.26-rc5/drivers/i2c/busses/i2c-elektor.c   2008-06-13 09:32:27.000000000 +0200
>> @@ -196,8 +196,6 @@ static struct i2c_algo_pcf_data pcf_isa_
>>        .getown     = pcf_isa_getown,
>>        .getclock   = pcf_isa_getclock,
>>        .waitforpin = pcf_isa_waitforpin,
>> -       .udelay     = 10,
>> -       .timeout    = 100,
>>  };
>>
>>  static struct i2c_adapter pcf_isa_ops = {
>> --- linux-2.6.26-rc5.orig/include/linux/i2c-algo-pcf.h  2008-06-13 09:08:00.000000000 +0200
>> +++ linux-2.6.26-rc5/include/linux/i2c-algo-pcf.h       2008-06-13 09:11:50.000000000 +0200
>> @@ -33,10 +33,6 @@ struct i2c_algo_pcf_data {
>>        int  (*getclock) (void *data);
>>        void (*waitforpin) (void);
>>
>> -       /* local settings */
>> -       int udelay;
>> -       int timeout;
>> -
>>        /* Multi-master lost arbitration back-off delay (msecs)
>>         * This should be set by the bus adapter or knowledgable client
>>         * if bus is multi-mastered, else zero
>>
>>
>> --
>> Jean Delvare
>>
> 
> ACKed on 2.6.26-rc1.  Compiles (and runs) fine.
> 
> [Daniel, this requires changes to i2c-envctrl, since it references the
> removed members when initializing the i2c_algo_pcf_data struct.]
> 
> Thanks again, Jean.
> 
> E
> 
> 
Do you includes this changes to SVN repository or can  do it myself on my source ?


	Dan



_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c

      parent reply	other threads:[~2008-06-13 16:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-13  8:25 [PATCH] i2c-algo-pcf: Drop unused struct members Jean Delvare
     [not found] ` <20080613102510.0b40b352-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-13 15:54   ` Eric Brower
     [not found]     ` <ec7cefb0806130854y66f93fa8x9b671b539d9b2492-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-13 16:36       ` Daniel Smolik [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4852A1F9.7030005@mydatex.cz \
    --to=marvin-0pwkb23idfjrbkcemvbida@public.gmane.org \
    --cc=ebrower-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox