From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Rapoport Subject: Re: Grouping i2c bus drivers Date: Mon, 30 Jun 2008 12:56:29 +0300 Message-ID: <4868ADCD.3080305@compulab.co.il> References: <20080627145236.2a20aaad@hyperion.delvare> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080627145236.2a20aaad-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Jean Delvare Cc: Linux I2C List-Id: linux-i2c@vger.kernel.org Jean Delvare wrote: > Hi all, > > As was mentioned previously, I have decided to group the i2c bus > drivers to make it easier for the users to know what they need (and also > for me to know what drivers might be affected by a given problem.) Here > is the list I have at the moment. There are still many drivers in the > "Other" category. I suspect that many of these should move to the > "Embedded" category, but I don't know for sure. So I would welcome > comments and suggestions for improvements. > [ snip ] > obj-$(CONFIG_SCx200_ACB) += scx200_acb.o > obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o SCx200 are Geode GX/LX devices, so I think it also can be moved to embedded. > (Of course, Kconfig has similar groups.) > > Thanks, -- Sincerely yours, Mike. _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c