From: Hans de Goede <j.w.r.degoede-fbo2DhPpy/Q@public.gmane.org>
To: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: Maarten Deprez
<maartendeprez-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
Linux I2C <i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org>,
LM Sensors <lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org>
Subject: Re: [lm-sensors] [PATCH] hwmon: (gl520sm) Convert to a new-style i2c driver
Date: Wed, 16 Jul 2008 20:27:13 +0200 [thread overview]
Message-ID: <487E3D81.5070603@hhs.nl> (raw)
In-Reply-To: <20080716163723.61391a7a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
Jean Delvare wrote:
> The new-style gl520sm driver implements the optional detect() callback
> to cover the use cases of the legacy driver.
>
> Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
> Cc: Maarten Deprez <maartendeprez-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Looks good,
Acked-by: Hans de Goede <j.w.r.degoede-fbo2DhPpy/Q@public.gmane.org>
Regards,
Hans
> ---
> drivers/hwmon/gl520sm.c | 91 ++++++++++++++++++++++-------------------------
> 1 file changed, 43 insertions(+), 48 deletions(-)
>
> --- linux-2.6.26-rc9.orig/drivers/hwmon/gl520sm.c 2008-07-12 09:20:30.000000000 +0200
> +++ linux-2.6.26-rc9/drivers/hwmon/gl520sm.c 2008-07-12 10:27:21.000000000 +0200
> @@ -79,26 +79,37 @@ static const u8 GL520_REG_TEMP_MAX_HYST[
> * Function declarations
> */
>
> -static int gl520_attach_adapter(struct i2c_adapter *adapter);
> -static int gl520_detect(struct i2c_adapter *adapter, int address, int kind);
> +static int gl520_probe(struct i2c_client *client,
> + const struct i2c_device_id *id);
> +static int gl520_detect(struct i2c_client *client, int kind,
> + struct i2c_board_info *info);
> static void gl520_init_client(struct i2c_client *client);
> -static int gl520_detach_client(struct i2c_client *client);
> +static int gl520_remove(struct i2c_client *client);
> static int gl520_read_value(struct i2c_client *client, u8 reg);
> static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value);
> static struct gl520_data *gl520_update_device(struct device *dev);
>
> /* Driver data */
> +static const struct i2c_device_id gl520_id[] = {
> + { "gl520sm", gl520sm },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, gl520_id);
> +
> static struct i2c_driver gl520_driver = {
> + .class = I2C_CLASS_HWMON,
> .driver = {
> .name = "gl520sm",
> },
> - .attach_adapter = gl520_attach_adapter,
> - .detach_client = gl520_detach_client,
> + .probe = gl520_probe,
> + .remove = gl520_remove,
> + .id_table = gl520_id,
> + .detect = gl520_detect,
> + .address_data = &addr_data,
> };
>
> /* Client data */
> struct gl520_data {
> - struct i2c_client client;
> struct device *hwmon_dev;
> struct mutex update_lock;
> char valid; /* zero until the following fields are valid */
> @@ -669,37 +680,15 @@ static const struct attribute_group gl52
> * Real code
> */
>
> -static int gl520_attach_adapter(struct i2c_adapter *adapter)
> -{
> - if (!(adapter->class & I2C_CLASS_HWMON))
> - return 0;
> - return i2c_probe(adapter, &addr_data, gl520_detect);
> -}
> -
> -static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
> +/* Return 0 if detection is successful, -ENODEV otherwise */
> +static int gl520_detect(struct i2c_client *client, int kind,
> + struct i2c_board_info *info)
> {
> - struct i2c_client *client;
> - struct gl520_data *data;
> - int err = 0;
> + struct i2c_adapter *adapter = client->adapter;
>
> if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
> I2C_FUNC_SMBUS_WORD_DATA))
> - goto exit;
> -
> - /* OK. For now, we presume we have a valid client. We now create the
> - client structure, even though we cannot fill it completely yet.
> - But it allows us to access gl520_{read,write}_value. */
> -
> - if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
> - err = -ENOMEM;
> - goto exit;
> - }
> -
> - client = &data->client;
> - i2c_set_clientdata(client, data);
> - client->addr = address;
> - client->adapter = adapter;
> - client->driver = &gl520_driver;
> + return -ENODEV;
>
> /* Determine the chip type. */
> if (kind < 0) {
> @@ -707,24 +696,36 @@ static int gl520_detect(struct i2c_adapt
> ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
> ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
> dev_dbg(&client->dev, "Unknown chip type, skipping\n");
> - goto exit_free;
> + return -ENODEV;
> }
> }
>
> - /* Fill in the remaining client fields */
> - strlcpy(client->name, "gl520sm", I2C_NAME_SIZE);
> - mutex_init(&data->update_lock);
> + strlcpy(info->type, "gl520sm", I2C_NAME_SIZE);
>
> - /* Tell the I2C layer a new client has arrived */
> - if ((err = i2c_attach_client(client)))
> - goto exit_free;
> + return 0;
> +}
> +
> +static int gl520_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct gl520_data *data;
> + int err;
> +
> + data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL);
> + if (!data) {
> + err = -ENOMEM;
> + goto exit;
> + }
> +
> + i2c_set_clientdata(client, data);
> + mutex_init(&data->update_lock);
>
> /* Initialize the GL520SM chip */
> gl520_init_client(client);
>
> /* Register sysfs hooks */
> if ((err = sysfs_create_group(&client->dev.kobj, &gl520_group)))
> - goto exit_detach;
> + goto exit_free;
>
> if (data->two_temps) {
> if ((err = device_create_file(&client->dev,
> @@ -764,8 +765,6 @@ static int gl520_detect(struct i2c_adapt
> exit_remove_files:
> sysfs_remove_group(&client->dev.kobj, &gl520_group);
> sysfs_remove_group(&client->dev.kobj, &gl520_group_opt);
> -exit_detach:
> - i2c_detach_client(client);
> exit_free:
> kfree(data);
> exit:
> @@ -811,18 +810,14 @@ static void gl520_init_client(struct i2c
> gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
> }
>
> -static int gl520_detach_client(struct i2c_client *client)
> +static int gl520_remove(struct i2c_client *client)
> {
> struct gl520_data *data = i2c_get_clientdata(client);
> - int err;
>
> hwmon_device_unregister(data->hwmon_dev);
> sysfs_remove_group(&client->dev.kobj, &gl520_group);
> sysfs_remove_group(&client->dev.kobj, &gl520_group_opt);
>
> - if ((err = i2c_detach_client(client)))
> - return err;
> -
> kfree(data);
> return 0;
> }
>
>
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
prev parent reply other threads:[~2008-07-16 18:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-16 14:37 [PATCH] hwmon: (gl520sm) Convert to a new-style i2c driver Jean Delvare
[not found] ` <20080716163723.61391a7a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-07-16 18:27 ` Hans de Goede [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=487E3D81.5070603@hhs.nl \
--to=j.w.r.degoede-fbo2dhppy/q@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=maartendeprez-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox