Re: [PATCH] powerpc: i2c-mpc: make speed registers configurable via FDT

[Wolfgang Grandegger <wg@grandegger.com>]

Timur Tabi wrote:
> Wolfgang Grandegger wrote:
> 
>> But clock-frequency, aka bus-frequency, is already used by 
>> fsl_get_sys_freq():
>>
>> http://lxr.linux.no/linux+v2.6.26/arch/powerpc/sysdev/fsl_soc.c#L80
> 
> So?  clock-frequency is a per-node property.  I use it in the codec node on the
> 8610 (mpc8610_hpcd.dts).  It does not mean "platform clock frequency".
> 
>> U-Boot could then fixup that value like bus-frequency() and the i2c-mpc 
>> driver simply calls fsl_get_i2c_freq().
> 
> This is just more complicated than it needs to be.  Why should the I2C driver
> fetch the platform clock and the divider from the parent node, and then do
> additional math, when it could just get the value it needs right from the node
> it's probing?

I'm a bit confused. The frequency of the I2C source clock and the real 
I2C clock frequency are two different things. The first one is common 
for all I2C devices, the second can be different. What properties would 
you like to use for defining both?

> Besides, U-Boot does not currently store the divider value.  Look at the code
> I've posted twice already - it stores the frequency in i2c1_clk.  So now I would
> need to create another variable in the gd_t to store the divider?  No thanks.

OK, that's an argument but it's biased by U-Boot.

Wolfgang.