From mboxrd@z Thu Jan 1 00:00:00 1970 From: Timur Tabi Subject: Re: [PATCH] powerpc: i2c-mpc: make speed registers configurable via FDT Date: Thu, 31 Jul 2008 15:28:05 -0500 Message-ID: <48922055.1040906@freescale.com> References: <4889EFFE.2070201@grandegger.com> <4889FD1D.4010804@freescale.com> <20080727012722.GH12191@secretlab.ca> <4891A744.6060005@grandegger.com> <9e4733910807310849g7e5612dbk9536733e061af8ad@mail.gmail.com> <4891F4D8.9090905@grandegger.com> <4891FC3A.7040609@freescale.com> <20080731180959.GA29057@secretlab.ca> <489200B6.9060906@freescale.com> <20080731182810.GB29097@secretlab.ca> <48920607.5040606@freescale.com> <48921187.1090101@grandegger.com> <48921179.1080403@freescale.com> <48921888.3020900@grandegger.com> <48921954.4020103@freescale.com> <48921DED.6010403@grandegger.com> <48921E44.7010502@freescale.com> <48922087.4050903@grandegger.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <48922087.4050903-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Wolfgang Grandegger Cc: Grant Likely , Scott Wood , Linux I2C , Linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org List-Id: linux-i2c@vger.kernel.org Wolfgang Grandegger wrote: >> 2) The speed of the I2C bus, as seen by devices on that bus. This is usually >> 400KHz. > > Which should be defined with the property "current-speed", right? I would use something like "bus-speed", but yes. The word "current" shouldn't be in a property string. -- Timur Tabi Linux kernel developer at Freescale _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c