From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marco Aurelio da Costa Subject: Re: PCA9665 controller Date: Tue, 16 Sep 2008 13:03:48 -0300 Message-ID: <48CFD8E4.3000302@gamic.com> References: <48CFC9A7.4010104@gamic.com> <20080916155404.GE4318@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080916155404.GE4318-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Wolfram Sang Cc: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org List-Id: linux-i2c@vger.kernel.org Hello Wolfram, Wolfram Sang wrote: >> Is someone working on a driver for the PCA9665? >> If not, I will start working on it. >> > > You probably already found that yourself, I just want to make sure; > there already is a pca-platform-driver and a pca-algorithm. They should > be useful for you... > Thanks, I noticed that. The PCA driver is written for the PCA9564. There are some differences between the 9665 and the 9564, that is why this driver cannot be used as is, but still they are very similar, and I will try to reuse as much code as possible. Regards, Marco _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c