From mboxrd@z Thu Jan 1 00:00:00 1970 From: Frank Seidel Subject: [PATCHv2 2/2] i2c: adapt debug macros for KERN_* constants Date: Sun, 08 Feb 2009 15:20:31 +0100 Message-ID: <498EEA2F.5050601@suse.de> References: <498C3EEA.5060508@suse.de> <498EE9C9.4080002@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <498EE9C9.4080002-l3A5Bk7waGM@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux kernel Cc: akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org, khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org, ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, frank-aMRDT+nbkrEb1SvskN2V4Q@public.gmane.org, w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, "David S. Miller" , ukleinek-jNDFPZUTrfROceuj71AUlABBhMqQ4zRThC4ANOJQIlc@public.gmane.org, Frans Pop , Geert Uytterhoeven Jean Delvare , Frank Seidel List-Id: linux-i2c@vger.kernel.org From: Frank Seidel According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the changes to the debug macros in the i2c subsystem to meet this requirement. Also changing no-debug statements to raw printks again. Signed-off-by: Frank Seidel --- drivers/i2c/algos/i2c-algo-pca.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -27,9 +27,12 @@ #include #include -#define DEB1(fmt, args...) do { if (i2c_debug>=1) printk(fmt, ## args); } while(0) -#define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0) -#define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0) +#define DEB1(fmt, args...) do { if (i2c_debug >= 1) \ + printk(KERN_DEBUG fmt, ## args); } while (0) +#define DEB2(fmt, args...) do { if (i2c_debug >= 2) \ + printk(KERN_DEBUG fmt, ## args); } while (0) +#define DEB3(fmt, args...) do { if (i2c_debug >= 3) \ + printk(KERN_DEBUG fmt, ## args); } while (0) static int i2c_debug; @@ -313,7 +316,7 @@ static int pca_xfer(struct i2c_adapter * ret = curmsg; out: - DEB1(KERN_CRIT "}}} transfered %d/%d messages. " + DEB1("}}} transfered %d/%d messages. " "status is %#04x. control is %#04x\n", curmsg, num, pca_status(adap), pca_get_con(adap)); @@ -347,7 +350,8 @@ static int pca_init(struct i2c_adapter * pca_reset(pca_data); clock = pca_clock(pca_data); - DEB1(KERN_INFO "%s: Clock frequency is %dkHz\n", adap->name, freqs[clock]); + printk(KERN_INFO "%s: Clock frequency is %dkHz\n", adap->name, + freqs[clock]); pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock); udelay(500); /* 500 us for oscilator to stabilise */