Re: [PATCH] i2c-davinci: Fix timeout handling

[Troy Kisky <troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>]

Jean Delvare wrote:
> Properly set the adapter timeout value in jiffies, and then use that
> value in the driver, rather than a hard-coded constant.
> 
> Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
> Cc: Troy Kisky <troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
> Cc: Kevin Hilman <khilman-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
> ---
> Troy, Kevin, can either of you please review, build test and run test
> this patch? Thanks.
> 
>  drivers/i2c/busses/i2c-davinci.c |    8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> --- linux-2.6.29-rc6.orig/drivers/i2c/busses/i2c-davinci.c	2009-02-23 08:50:47.000000000 +0100
> +++ linux-2.6.29-rc6/drivers/i2c/busses/i2c-davinci.c	2009-02-23 14:56:17.000000000 +0100
> @@ -216,7 +216,7 @@ static int i2c_davinci_wait_bus_not_busy
>  {
>  	unsigned long timeout;
>  
> -	timeout = jiffies + DAVINCI_I2C_TIMEOUT;
> +	timeout = jiffies + dev->adapter.timeout;
>  	while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG)
>  	       & DAVINCI_I2C_STR_BB) {
>  		if (time_after(jiffies, timeout)) {
> @@ -289,7 +289,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter
>  	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
>  
>  	r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
> -						      DAVINCI_I2C_TIMEOUT);
> +						      dev->adapter.timeout);
>  	if (r == 0) {
>  		dev_err(dev->dev, "controller timed out\n");
>  		i2c_davinci_init(dev);
> @@ -546,9 +546,7 @@ static int davinci_i2c_probe(struct plat
>  	strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
>  	adap->algo = &i2c_davinci_algo;
>  	adap->dev.parent = &pdev->dev;
> -
> -	/* FIXME */
> -	adap->timeout = 1;
> +	adap->timeout = DAVINCI_I2C_TIMEOUT;
>  
>  	adap->nr = pdev->id;
>  	r = i2c_add_numbered_adapter(adap);
> 
I tested this without issues.

Thanks
Troy