linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Ware <mware-kb99s61Wg94xnpGSZB1jBA@public.gmane.org>
To: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org,
	linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL
Date: Tue, 21 Apr 2009 22:49:02 +1000	[thread overview]
Message-ID: <49EDC0BE.7040505@elphinstone.net> (raw)

Recent DMA changes result in a BUG() when NULL is passed to
dma_alloc_coherent in place of a device.

Signed-off-by: Mark Ware <mware-kb99s61Wg94xnpGSZB1jBA@public.gmane.org>
---

This patch fixes the BUG() during boot that has appeared during the
2.6.30 window. It has been tested and appears correct on my 8280 based
board.
Sent to both linuxppc-dev and linux-i2c, since I'm not sure where it belongs.


  drivers/i2c/busses/i2c-cpm.c |   14 ++++++++------
  1 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 3fcf78e..83276d2 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -532,7 +532,8 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)

  	for (i = 0; i < CPM_MAXBD; i++) {
  		cpm->rxbuf[i] = dma_alloc_coherent(
-			NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL);
+			&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->rxdma[i],
+			GFP_KERNEL);
  		if (!cpm->rxbuf[i]) {
  			ret = -ENOMEM;
  			goto out_muram;
@@ -540,7 +541,8 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
  		out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));

  		cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(
-			NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
+			&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i],
+			GFP_KERNEL);
  		if (!cpm->txbuf[i]) {
  			ret = -ENOMEM;
  			goto out_muram;
@@ -585,10 +587,10 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
  out_muram:
  	for (i = 0; i < CPM_MAXBD; i++) {
  		if (cpm->rxbuf[i])
-			dma_free_coherent(NULL, CPM_MAX_READ + 1,
+			dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
  				cpm->rxbuf[i], cpm->rxdma[i]);
  		if (cpm->txbuf[i])
-			dma_free_coherent(NULL, CPM_MAX_READ + 1,
+			dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
  				cpm->txbuf[i], cpm->txdma[i]);
  	}
  	cpm_muram_free(cpm->dp_addr);
@@ -619,9 +621,9 @@ static void cpm_i2c_shutdown(struct cpm_i2c *cpm)

  	/* Free all memory */
  	for (i = 0; i < CPM_MAXBD; i++) {
-		dma_free_coherent(NULL, CPM_MAX_READ + 1,
+		dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
  			cpm->rxbuf[i], cpm->rxdma[i]);
-		dma_free_coherent(NULL, CPM_MAX_READ + 1,
+		dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
  			cpm->txbuf[i], cpm->txdma[i]);
  	}

-- 
1.5.6.5

             reply	other threads:[~2009-04-21 12:49 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-21 12:49 Mark Ware [this message]
     [not found] ` <49EDC0BE.7040505-kb99s61Wg94xnpGSZB1jBA@public.gmane.org>
2009-04-21 13:32   ` [PATCH] i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL Jochen Friedrich
2009-04-21 15:11   ` Kumar Gala
     [not found]     ` <E2205842-8019-4CE4-812B-64ABD76F36F4-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
2009-04-22 21:56       ` Ben Dooks
2009-04-29 13:43         ` Kumar Gala
     [not found]           ` <AAD6564F-9D99-492B-8364-10A652F990DF-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
2009-05-03 22:23             ` Ben Dooks
     [not found]               ` <20090503222352.GB5750-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2009-05-03 23:58                 ` Mark Ware
2009-05-11  4:28                 ` Mark Ware
     [not found]                   ` <4A07A982.40504-kb99s61Wg94xnpGSZB1jBA@public.gmane.org>
2009-05-11 23:18                     ` Ben Dooks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49EDC0BE.7040505@elphinstone.net \
    --to=mware-kb99s61wg94xnpgszb1jba@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).