Re: [PATCH v3 1/3] MFD: introduce lpc_sch for Intel SCH LPC bridge

[Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>]

On 02/18/10 10:01, Denis Turischev wrote:
> Intel Poulsbo (SCH) chipset LPC bridge controller contains several
> functions. Creating and MFD driver for the LPC bridge controller allows
> simultaneous use of SMBus and GPIO interfaces on the SCH.
> 
> v2: added "select MFD_CORE"
> v3: removed "default m"

Thanks.


> Signed-off-by: Denis Turischev <denis-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
> 
> diff -Nru linux-2.6.33-rc7.orig/drivers/mfd/Kconfig
> linux-2.6.33-rc7/drivers/mfd/Kconfig
> --- linux-2.6.33-rc7.orig/drivers/mfd/Kconfig    2010-02-07
> 00:17:12.000000000 +0200
> +++ linux-2.6.33-rc7/drivers/mfd/Kconfig    2010-02-18
> 19:56:19.000000000 +0200
> @@ -348,6 +348,14 @@
>        read/write functions for the devices to get access to this chip.
>        This chip embeds various other multimedia funtionalities as well.
> 
> +config LPC_SCH
> +    tristate "Intel SCH LPC"
> +    depends on PCI
> +    select MFD_CORE
> +    help
> +      LPC bridge function of the Intel SCH provides support for
> +      System Management Bus and General Purpose I/O.
> +
>  endmenu
> 
>  menu "Multimedia Capabilities Port drivers"


-- 
~Randy