* [PATCH] i2c: Enable NXP LPC support in Kconfig
@ 2010-08-05 22:40 Kevin Wells
[not found] ` <AANLkTimD2Odr2zTF5fammq9i+yeCTjOMqG+NXjiLnB-i-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Kevin Wells @ 2010-08-05 22:40 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
vitaly.wool-Re5JQEeQqe8AvxtiuMwx3w, kevin.wells-3arQi8VN3Tc
NXP LPC series processors use the IP3204 I2C block shared with the
Philips PNX4008 processor.
Signed-off-by: Kevin Wells <wellsk40-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/i2c/busses/Kconfig | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index bceafbf..77eabae 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -496,8 +496,8 @@ config I2C_PMCMSP
will be called i2c-pmcmsp.
config I2C_PNX
- tristate "I2C bus support for Philips PNX targets"
- depends on ARCH_PNX4008
+ tristate "I2C bus support for Philips PNX and NXP LPC targets"
+ depends on ARCH_PNX4008 || ARCH_LPC32XX
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
--
1.7.1.1
^ permalink raw reply related [flat|nested] 3+ messages in thread[parent not found: <AANLkTimD2Odr2zTF5fammq9i+yeCTjOMqG+NXjiLnB-i-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH] i2c: Enable NXP LPC support in Kconfig [not found] ` <AANLkTimD2Odr2zTF5fammq9i+yeCTjOMqG+NXjiLnB-i-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2010-08-09 10:36 ` Ben Dooks 2010-08-09 14:33 ` Wolfram Sang 1 sibling, 0 replies; 3+ messages in thread From: Ben Dooks @ 2010-08-09 10:36 UTC (permalink / raw) To: linux-i2c-u79uwXL29TY76Z2rM5mHXA Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On 05/08/10 23:40, Kevin Wells wrote: > NXP LPC series processors use the IP3204 I2C block shared with the > Philips PNX4008 processor. > ok, applied. ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] i2c: Enable NXP LPC support in Kconfig [not found] ` <AANLkTimD2Odr2zTF5fammq9i+yeCTjOMqG+NXjiLnB-i-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2010-08-09 10:36 ` Ben Dooks @ 2010-08-09 14:33 ` Wolfram Sang 1 sibling, 0 replies; 3+ messages in thread From: Wolfram Sang @ 2010-08-09 14:33 UTC (permalink / raw) To: Kevin Wells Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-i2c-u79uwXL29TY76Z2rM5mHXA, vitaly.wool-Re5JQEeQqe8AvxtiuMwx3w, kevin.wells-3arQi8VN3Tc [-- Attachment #1: Type: text/plain, Size: 490 bytes --] On Thu, Aug 05, 2010 at 03:40:17PM -0700, Kevin Wells wrote: > NXP LPC series processors use the IP3204 I2C block shared with the > Philips PNX4008 processor. > > Signed-off-by: Kevin Wells <wellsk40-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> FWIW Tested-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> -- Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ | [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 198 bytes --] ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-08-09 14:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-05 22:40 [PATCH] i2c: Enable NXP LPC support in Kconfig Kevin Wells
[not found] ` <AANLkTimD2Odr2zTF5fammq9i+yeCTjOMqG+NXjiLnB-i-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-08-09 10:36 ` Ben Dooks
2010-08-09 14:33 ` Wolfram Sang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).