Re: [PATCH 08/12] hwmon: lis3: Adjust fuzziness for 8 bit device

["Éric Piel" <eric.piel@tremplin-utc.net>]

Op 22-10-10 13:57, Samu Onkalo schreef:
> Default fuziness is set smaller for 8 device.
> In 12 bit device LSB is quite close to 1 mg
> (mg = 1 / 1000 of earth gravity).
> In 8bit device LSB is about 18 mg.
> Set fuziness to 1 for 8 bit device.
>
> Signed-off-by: Samu Onkalo<samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
> ---
>   drivers/hwmon/lis3lv02d.c |   18 ++++++++++++++----
>   1 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
> index d66cbe1..7555091 100644
> --- a/drivers/hwmon/lis3lv02d.c
> +++ b/drivers/hwmon/lis3lv02d.c
> @@ -71,8 +71,10 @@
>   #define LIS3_SENSITIVITY_12B		((LIS3_ACCURACY * 1000) / 1024)
>   #define LIS3_SENSITIVITY_8B		(18 * LIS3_ACCURACY)
>
> -#define LIS3_DEFAULT_FUZZ		3
> -#define LIS3_DEFAULT_FLAT		3
> +#define LIS3_DEFAULT_FUZZ_12B		3
> +#define LIS3_DEFAULT_FLAT_12B		3
> +#define LIS3_DEFAULT_FUZZ_8B		1
> +#define LIS3_DEFAULT_FLAT_8B		1
>
>   struct lis3lv02d lis3_dev = {
>   	.misc_wait   = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait),
> @@ -530,8 +532,16 @@ int lis3lv02d_joystick_enable(void)
>
>   	set_bit(EV_ABS, input_dev->evbit);
>   	max_val = (lis3_dev.mdps_max_val * lis3_dev.scale) / LIS3_ACCURACY;
> -	fuzz = (LIS3_DEFAULT_FUZZ * lis3_dev.scale) / LIS3_ACCURACY;
> -	flat = (LIS3_DEFAULT_FLAT * lis3_dev.scale) / LIS3_ACCURACY;
> +	if (lis3_dev.whoami == WAI_12B) {
> +		fuzz = LIS3_DEFAULT_FUZZ_12B;
> +		flat = LIS3_DEFAULT_FLAT_12B;
> +	} else {
> +		fuzz = LIS3_DEFAULT_FUZZ_8B;
> +		flat = LIS3_DEFAULT_FLAT_8B;
> +	}
> +	fuzz = (fuzz * lis3_dev.scale) / LIS3_ACCURACY;
> +	flat = (flat * lis3_dev.scale) / LIS3_ACCURACY;
> +
>   	input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat);
>   	input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat);
>   	input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat);