From: Corey Minyard <cminyard-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
To: minyard-HInyCGIudOg@public.gmane.org,
Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] i2c: Add parameters to sysfs-added i2c devices
Date: Mon, 24 Nov 2014 07:43:23 -0600 [thread overview]
Message-ID: <547335FB.4020002@mvista.com> (raw)
In-Reply-To: <1415976117-27755-1-git-send-email-minyard-HInyCGIudOg@public.gmane.org>
Ping, I haven't heard anything on this.
-corey
On 11/14/2014 08:41 AM, minyard-HInyCGIudOg@public.gmane.org wrote:
> From: Corey Minyard <cminyard-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
>
> Some devices might need parameters to control their operation,
> add the ability to pass these parameters to the client.
>
> This also makes the parsing of sysfs-added I2C devices a little
> more flexible, allowing tabs and arbitrary numbers of spaces.
>
> Signed-off-by: Corey Minyard <cminyard-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
> ---
> drivers/i2c/i2c-core.c | 46 ++++++++++++++++++++++++++++++++++------------
> include/linux/i2c.h | 3 +++
> 2 files changed, 37 insertions(+), 12 deletions(-)
>
> I'm adding an SMBus IPMI driver, and it needs to be able to have
> the IPMI bus address specified in case it's not the default.
>
> Also, this seems like it would be useful for other devices that
> need some sort of configuration.
>
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index f43b4e1..9a2ab13 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -781,7 +781,10 @@ static int i2c_device_pm_restore(struct device *dev)
>
> static void i2c_client_dev_release(struct device *dev)
> {
> - kfree(to_i2c_client(dev));
> + struct i2c_client *client = to_i2c_client(dev);
> +
> + kfree(client->parms);
> + kfree(client);
> }
>
> static ssize_t
> @@ -1059,6 +1062,13 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
> client->flags = info->flags;
> client->addr = info->addr;
> client->irq = info->irq;
> + if (info->parms) {
> + client->parms = kstrdup(info->parms, GFP_KERNEL);
> + if (!client->parms) {
> + dev_err(&adap->dev, "Out of memory allocating parms\n");
> + goto out_err_silent;
> + }
> + }
>
> strlcpy(client->name, info->type, sizeof(client->name));
>
> @@ -1207,31 +1217,43 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
> struct i2c_adapter *adap = to_i2c_adapter(dev);
> struct i2c_board_info info;
> struct i2c_client *client;
> - char *blank, end;
> + char *pos, end;
> int res;
>
> memset(&info, 0, sizeof(struct i2c_board_info));
>
> - blank = strchr(buf, ' ');
> - if (!blank) {
> + pos = strpbrk(buf, " \t");
> + if (!pos) {
> dev_err(dev, "%s: Missing parameters\n", "new_device");
> return -EINVAL;
> }
> - if (blank - buf > I2C_NAME_SIZE - 1) {
> + if (pos - buf > I2C_NAME_SIZE - 1) {
> dev_err(dev, "%s: Invalid device name\n", "new_device");
> return -EINVAL;
> }
> - memcpy(info.type, buf, blank - buf);
> + memcpy(info.type, buf, pos - buf);
>
> - /* Parse remaining parameters, reject extra parameters */
> - res = sscanf(++blank, "%hi%c", &info.addr, &end);
> - if (res < 1) {
> + while (isspace(*pos))
> + pos++;
> +
> + /* Parse address, saving remaining parameters. */
> + res = sscanf(pos, "%hi%c", &info.addr, &end);
> + if (res < 1 || !isspace(end)) {
> dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
> return -EINVAL;
> }
> - if (res > 1 && end != '\n') {
> - dev_err(dev, "%s: Extra parameters\n", "new_device");
> - return -EINVAL;
> + if (res > 1 && end != '\n') {
> + if (isspace(end)) {
> + /* Extra parms, skip the address and space. */
> + while (!isspace(*pos))
> + pos++;
> + while (isspace(*pos))
> + pos++;
> + info.parms = pos;
> + } else {
> + dev_err(dev, "%s: Extra parameters\n", "new_device");
> + return -EINVAL;
> + }
> }
>
> client = i2c_new_device(adap, &info);
> diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> index b556e0a..e40fc56 100644
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -222,6 +222,7 @@ struct i2c_client {
> char name[I2C_NAME_SIZE];
> struct i2c_adapter *adapter; /* the adapter we sit on */
> struct device dev; /* the device structure */
> + char *parms; /* sysfs extra parms */
> int irq; /* irq issued by device */
> struct list_head detected;
> };
> @@ -255,6 +256,7 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
> * @archdata: copied into i2c_client.dev.archdata
> * @of_node: pointer to OpenFirmware device node
> * @acpi_node: ACPI device node
> + * @parms: Parameters supplied on the sysfs command line
> * @irq: stored in i2c_client.irq
> *
> * I2C doesn't actually support hardware probing, although controllers and
> @@ -276,6 +278,7 @@ struct i2c_board_info {
> struct dev_archdata *archdata;
> struct device_node *of_node;
> struct acpi_dev_node acpi_node;
> + char *parms;
> int irq;
> };
>
next prev parent reply other threads:[~2014-11-24 13:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-14 14:41 [PATCH] i2c: Add parameters to sysfs-added i2c devices minyard-HInyCGIudOg
[not found] ` <1415976117-27755-1-git-send-email-minyard-HInyCGIudOg@public.gmane.org>
2014-11-24 13:43 ` Corey Minyard [this message]
2014-12-01 17:38 ` Wolfram Sang
2014-12-02 13:06 ` Corey Minyard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=547335FB.4020002@mvista.com \
--to=cminyard-igf4poytycdqt0dzr+alfa@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=minyard-HInyCGIudOg@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).