From: Mike Looijmans <info-KQxf8TFvCoAi8rCdYzckzA@public.gmane.org>
To: "Grygorii Strashko"
<grygorii.strashko-l0cyMroinI0@public.gmane.org>,
"Uwe Kleine-König"
<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>,
Kevin Hilman
<khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>,
Santosh Shilimkar
<ssantosh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Murali Karicheri <m-karicheri2-l0cyMroinI0@public.gmane.org>,
Ben Gardiner
<bengardiner-ScDXFp4xN3PN+rMO2ozGnw@public.gmane.org>,
Mike Looijmans
<milo-software-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: Re: [5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
Date: Mon, 24 Nov 2014 19:13:06 +0100 [thread overview]
Message-ID: <54737532.1050808@milosoftware.com> (raw)
In-Reply-To: <54732F8E.4080105-l0cyMroinI0@public.gmane.org>
On 24-11-2014 14:15, Grygorii Strashko wrote:
> Hi Uwe,
> On 11/23/2014 07:04 PM, Uwe Kleine-König wrote:
>> On Thu, Nov 20, 2014 at 12:03:08PM +0200, Grygorii Strashko wrote:
>>> @@ -664,6 +759,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
>>> if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
>>> &prop))
>>> dev->pdata->bus_freq = prop / 1000;
>>> + dev->pdata->has_pfunc = true;
>> I don't understand this. Why does this ICPFUNC recovery work if the bus
>> is probed by oftree, but doesn't if not?
> I've mentioned this in commit message:
> Allow platforms to indicate the presence of the ICPFUNC registers with a has_pfunc
> platform data flag and enable this mode for platforms which supports DT (da850 and
> Keystone 2 are two SoCs which support DT now and they also support ICPFUNC registers).
>
> I'll add proper comment here.
Just thinking: What happens if you try to use the ICPFUNC registers on
platforms that don't support it? If the answer is "nothing bad", then
you might as well assume that if the platform doesn't specify its own
GPIOs, you can always try using the ICPFUNC registers to shake the I2C
bus. Better to try and fail than to never try at all...
>
>>> } else if (!dev->pdata) {
>>> dev->pdata = &davinci_i2c_platform_data_default;
>>> }
>>> @@ -705,7 +801,9 @@ static int davinci_i2c_probe(struct platform_device *pdev)
>>> adap->timeout = DAVINCI_I2C_TIMEOUT;
>>> adap->dev.of_node = pdev->dev.of_node;
>>>
>>> - if (dev->pdata->scl_pin) {
>>> + if (dev->pdata->has_pfunc)
>>> + adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;
>>> + else if (dev->pdata->scl_pin) {
>>> adap->bus_recovery_info = &davinci_i2c_gpio_recovery_info;
>>> adap->bus_recovery_info->scl_gpio = dev->pdata->scl_pin;
>>> adap->bus_recovery_info->sda_gpio = dev->pdata->sda_pin;
>>> diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h
>>> index 2312d19..89fd347 100644
>>> --- a/include/linux/platform_data/i2c-davinci.h
>>> +++ b/include/linux/platform_data/i2c-davinci.h
>>> @@ -18,6 +18,7 @@ struct davinci_i2c_platform_data {
>>> unsigned int bus_delay; /* post-transaction delay (usec) */
>>> unsigned int sda_pin; /* GPIO pin ID to use for SDA */
>>> unsigned int scl_pin; /* GPIO pin ID to use for SCL */
>>> + bool has_pfunc; /*chip has a ICPFUNC register */
>> Space after /* please
>>
> regards,
> -grygorii
>
>
>
next prev parent reply other threads:[~2014-11-24 18:13 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-20 10:03 [PATCH 0/5] i2c: davinci improvements and fixes Grygorii Strashko
2014-11-20 10:03 ` [PATCH 1/5] i2c: i2c-davinci: switch to use platform_get_irq Grygorii Strashko
2014-11-20 21:48 ` [1/5] " Uwe Kleine-König
[not found] ` <20141120214838.GA346-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-11-21 11:01 ` Grygorii Strashko
[not found] ` <546F1B7D.1020209-l0cyMroinI0@public.gmane.org>
2014-11-21 14:03 ` Rob Herring
2014-11-21 14:59 ` Grygorii Strashko
[not found] ` <1416477788-5544-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-11-20 10:03 ` [PATCH 2/5] i2c: davinci: query STP always when NACK is received Grygorii Strashko
[not found] ` <1416477788-5544-3-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-11-20 22:19 ` [2/5] " Uwe Kleine-König
[not found] ` <20141120221953.GI27002-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-11-21 12:48 ` Grygorii Strashko
[not found] ` <546F34B9.1000206-l0cyMroinI0@public.gmane.org>
2014-11-21 13:10 ` Uwe Kleine-König
2014-11-21 15:33 ` Grygorii Strashko
[not found] ` <546F5B51.1030006-l0cyMroinI0@public.gmane.org>
2014-11-23 20:33 ` Uwe Kleine-König
[not found] ` <20141123203314.GF4431-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-11-24 13:34 ` Grygorii Strashko
[not found] ` <547333EB.5050403-l0cyMroinI0@public.gmane.org>
2014-11-24 20:02 ` Uwe Kleine-König
2014-11-20 10:03 ` [PATCH 3/5] i2c: recovery: change input parameter to i2c_adapter for prepare/unprepare_recovery Grygorii Strashko
[not found] ` <1416477788-5544-4-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-11-21 18:49 ` [3/5] " Uwe Kleine-König
2014-11-20 10:03 ` [PATCH 4/5] i2c: davinci: use bus recovery infrastructure Grygorii Strashko
[not found] ` <1416477788-5544-5-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-11-21 19:07 ` [4/5] " Uwe Kleine-König
[not found] ` <20141121190744.GB4431-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-11-21 19:33 ` Grygorii Strashko
[not found] ` <546F9382.40102-l0cyMroinI0@public.gmane.org>
2014-11-23 20:36 ` Uwe Kleine-König
2014-11-24 13:26 ` Grygorii Strashko
[not found] ` <547331F2.3000006-l0cyMroinI0@public.gmane.org>
2014-11-24 20:07 ` Uwe Kleine-König
2014-11-20 10:03 ` [PATCH 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery Grygorii Strashko
[not found] ` <1416477788-5544-6-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-11-23 17:04 ` [5/5] " Uwe Kleine-König
[not found] ` <20141123170400.GC4431-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-11-24 13:15 ` Grygorii Strashko
[not found] ` <54732F8E.4080105-l0cyMroinI0@public.gmane.org>
2014-11-24 18:13 ` Mike Looijmans [this message]
[not found] ` <54737532.1050808-KQxf8TFvCoAi8rCdYzckzA@public.gmane.org>
2014-11-24 19:22 ` Grygorii Strashko
2014-11-24 19:45 ` Uwe Kleine-König
[not found] ` <20141124194533.GU4431-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-11-25 13:04 ` Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54737532.1050808@milosoftware.com \
--to=info-kqxf8tfvcoai8rcdyzckza@public.gmane.org \
--cc=bengardiner-ScDXFp4xN3PN+rMO2ozGnw@public.gmane.org \
--cc=grygorii.strashko-l0cyMroinI0@public.gmane.org \
--cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m-karicheri2-l0cyMroinI0@public.gmane.org \
--cc=milo-software-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=ssantosh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).